Ecological Aspects in the Process of Turning Cast Iron with Coated Tools

• Autorzy: Jenek Mariusz , Ociepa Michał , Woźniak Waldemar , Vilamová Šárka , Švecová Eva

Identyfikatory

DOI

10.54740/ros.2022.025

• Języki publikacji: EN

Abstrakty

EN

The article presents the research results on the influence of the PVD coating on the cutting tool on the surface roughness and energy consumption in the cast iron turning process. It was shown that using coated tools leads to obtaining a surface qualitatively corresponding to the ground surface and to reducing the power consumption of the machine tool. In addition, the process itself, carried out without a cooling and lubricating liquid, is more eco-friendly, as it excludes its use, disposal and negative environmental impact.

Słowa kluczowe

EN

machining; PVD coating; machine power consumption

• Wydawca: Politechnika Koszalińska
• Czasopismo: Rocznik Ochrona Środowiska
• Rocznik: 2022
• Tom: Tom 24
• Strony: 360--370
• Opis fizyczny: Bibliogr. 23 poz., rys., tab.

Twórcy

autor

Jenek Mariusz

• Department of Materials Science, Technology and Maintenance, Institute of Mechanical Engineering, Faculty of Mechanical Engineering, University of Zielona Góra, Poland

• https://orcid.org/0000-0001-8310-3678

autor

Ociepa Michał

• Faculty of Mechanical Engineering, University of Zielona Góra, Poland

• https://orcid.org/0000-0003-4937-6044

autor

Woźniak Waldemar

• Department of Production and Transport Engineering, Institute of Materials and Biomedical Engineering, Faculty of Mechanical Engineering, University of Zielona Góra, Poland

• https://orcid.org/0000-0002-4703-6823

autor

Vilamová Šárka

• Faculty of Materials Science and Technology, VŠB – Technical University of Ostrava, Czech Republic

• https://orcid.org/0000-0002-6486-7995

autor

Švecová Eva

• Faculty of Materials Science and Technology, VŠB – Technical University of Ostrava, Czech Republic

• https://orcid.org/0000-0002-8277-8590

Bibliografia

• Bianchi, E.C., Aguiar, P.R., Diniz, A.E., Canarim, R.C. (2011). Optimisation of ceramics grinding. Advances in Ceramics-Syntezis and Characterization. Processing and Specific Application. InTech.
• Brinksmeier, E., Heinzel, C., Wittmann, M. (1999). Friction, cooling and lubrication in grinding. Annals of the CRIPP, 48(1999)2, 581-598.
• Burakowski, T., Wierzchoń, T. (1995). Inżynieria powierzchni metali. WNT Warszawa (in Polish).
• Chamier-Gliszczynski, N., Krzyzynski, T. (2005). On modelling three-stage system of receipt and automotive recycling. REWAS’04, Global Symposium on Recycling, Waste Treatment and Clean Technology 2005, 2813-2814, Madrid, Spain, 26-29 September 2004, Conference Paper, ISBN: 8495520060.
• Chamier-Gliszczyński, N. (2010). Optimal Design for the Environment of the Means Transportation: A Case Study of Reuse and Recycling Materials. Sold State Phenomena, 165, 244-249. DOI: 10.4028/www.scientific.net/SSP.165.244
• Chamier-Gliszczyński, N. (2011). Recycling Aspect of End-of Life Vehicles. Recovery of Components and Materials from ELVs. Key Engineering Materials, 450, 421-424. DOI: 10.4028/www.scientific.net/KEM.450.421
• Chamier-Gliszczyński, N. (2011a). Reuse, Recovery and Recycling System of End-of Life Vehicles. Key Engineering Materials, 450, 425-428. DOI: 10.4028/www.scientific.net/KEM.450.425
• Chamier-Gliszczyński, N. (2011b). Environmental aspects of maintenance of transport means, end-of life stage of transport means. Eksploatacja i Niezawodność – Maintenance and Reliability, 50(2), 59-71. http://ein.org.pl/podstrony/wydania/50/pdf/07.pdf
• Czwajda, L., Kosacka-Olejnik, M., Kudelska, I., Kostrzewski, M., Sethanan, K., Pitakaso, R. (2019). Application of prediction markets phenomenon as decision support instrument in vehicle recycling sector. LogForum, 15(2), 265-278. DOI: 10.17270/J. LOG.2019.329
• Fratila, D. (2010). Macro-level environmental comparison of near-dry machining and flood machining. Journal of Cleaner Production, 18, 1031-1039.
• Gabryelewicz, I., Stryjski, R., Wędrychowicz, M., Dąbrowski, T. (2020). The State of the Air Quality in Poland, Rocznik Ochrona Środowiska, 22, 998-1013.
• Grigoriev, S.N, Volosova, M.A. (2007). Nanoszenie powłok i modyfikacja powierzchniowa narzędzi. MGTU Stankin Moskwa (in Russian).
• Kostrzewski, M. (2020). Sensitivity Analysis of Selected Parameters in the Order Picking Process Simulation Model, with Randomly Generated Orders. Entropy, 22(4), 423. DOI: 10.3390/e22040423
• Kostrzewski, M. (2018). One Design Issue – Many Solutions. Different Perspectives of Design Thinking – Case Study. In: Uden, L., Hadzima, B., Ting, I.H. (eds) Knowledge Management in Organisations. KMO 2018. Communications in Computer and Information Science, 877, 179-190. Springer, Cham. DOI: 10.1007/978-3-319-95204-8_16
• Kula, P. (2000). Inżynieria warstwy wierzchniej. Wydawnictwo Politechniki Łódzkiej (in Polish).
• Kupczyk, M. (2004). Inżynieria powierzchni. Powłoki przeciwzużyciowe na ostrza skrawające. Wydawnictwo Politechniki Poznańskiej 2004 (in Polish)
• Przybylski, L. (2000). Strategia doboru warunków obróbki współczesnymi narzędziami. Politechnika Krakowska (in Polish).
• Pusavec, F., Krajnik, D., Kopac, J. (2010). Transitioning to sustainable production – Part I: Application on machining technologies. Journal of Cleaner Production, 18, 1211-1221.
• Wędrychowicz, M., Besta, P., Gabryelewicz, I., Stryjski, R., Krupa, P. (2021). The Recycling of Secondary Waste in Polish Recycling Companies. Rocznik Ochrona Środowiska, 23, 715-730. DOI: 10.54740/ros.2021.050
• Wysiecki, M. (1997). Nowoczesne materiały narzędziowe. WNT, Warszawa (in Polish).
• Vasin, S.A., Vereshchaka, A.S., Kushneer, V.C. (2001). Skrawanie materiałów. Wydawnictwo MGTU Baumana, Moskwa (in Russian).
• Zwolińska, B., Tubis, A.A., Chamier-Gliszczyński, N., Kostrzewski, M. (2020). Personalization of the MES System to the Needs of Highly Variable Production. Sensors, 20, 6484. DOI: 10.3390/s20226484
• Katalog narzędzi firmy PANANA tools catalogue – https://pafana.pl

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).