An innovative approach to fabrication with photo-cured resins by shell-printed-core-casting

• Autorzy: Szymczyk Emil , Rećko Maciej , Dzierżek Kazimierz , Sapiołko Karol

Identyfikatory

DOI

10.2478/ama-2023-0056

• Języki publikacji: EN

Abstrakty

EN

Modified LCD-based method was used to print three-dimensional (3D) elements. This innovative method combines printing the external shell and filling, thus obtaining mould by casting resin. In order to compare the properties of prints obtained with this method with the ones fabricated in a standard procedure, we conducted bending tests of vertically/horizontally printed and shell-printed cast specimens. The shell-cast samples showed higher flexural strength and larger values of apparent Young’s modulus. The presented results also concern the kinetics of curing samples obtained with different fabrication routes.

Słowa kluczowe

EN

stereolithography; resin; printing; casting; curing; tensile test; bending

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2023
• Tom: Vol. 17, no. 4
• Strony: 485--489
• Opis fizyczny: Bibliogr. 15 poz.,

Twórcy

autor

Szymczyk Emil

• Faculty of Mechanical Engineering, Bialystok University of Technology, ul. Wiejska 45C, 15-351 Bialystok, Poland

• https://orcid.org/0009-0001-7242-2611

autor

Rećko Maciej

• Faculty of Mechanical Engineering, Bialystok University of Technology, ul. Wiejska 45C, 15-351 Bialystok, Poland

• https://orcid.org/0000-0001-8768-3753

autor

Dzierżek Kazimierz

• Faculty of Mechanical Engineering, Bialystok University of Technology, ul. Wiejska 45C, 15-351 Bialystok, Poland

• https://orcid.org/0000-0001-9184-1806

autor

Sapiołko Karol

• Faculty of Mechanical Engineering, Bialystok University of Technology, ul. Wiejska 45C, 15-351 Bialystok, Poland

• https://orcid.org/0009-0000-8490-8582

Bibliografia

• 1. Dizon JRC, Espera AH, Chen Q, Advincula RC. Mechanical characterisation of 3D-printed polymers. Addit Manuf. 2018 Mar 1;20:44–67.
• 2. Kazemi M, Rahimi A. Stereolithography process optimisation for tensile strength improvement of products. Rapid Prototyp J. 2018 Jan 1;24(4):688–97.
• 3. Formlabs. Inc. Validating Isotropy in SLA 3D Printing [Internet]. FORMLABS WHITE PAPER Validating Isotropy in SLA 3D Printing. [cited 2022 Dec 19]. Available from: https://3d.formlabs.com/validating-isotropy-in-sla-3d-printing/
• 4. Dulieu-Barton J m., Fulton M c. Mechanical Properties of a Typical Stereolithography Resin. Strain. 2000;36(2):81–7.
• 5. Wang S, Ma Y, Deng Z, Zhang K, Dai S. Implementation of an elastoplastic constitutive model for 3D-printed materials fabricated by stereolithography. Addit Manuf. 2020 May 1;33:101104.
• 6. Chacón JM, Caminero MA, García-Plaza E, Núñez PJ. Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection. Mater Des. 2017 Jun 15;124:143–57.
• 7. Schmidleithner C, Kalaskar D. Chapter 1 Stereolithography. In 2019 [cited 2023 Jan 19]. Available from: https://www.semanticscholar.org/ paper/Chapter-1-Stereolithography-SchmidleithnerKalaskar/0af4e17637d487d284f9f15330572d555634fe81
• 8. Guttridge C, Shannon A, O’Sullivan A, O’Sullivan KJ, O’Sullivan LW. Impact of increased UV curing time on the curing depth of photosensitive resins for 3D Printing [Internet]. In Review; 2022 May [cited 2023 Jan 19]. Available from: https://www.researchsquare.com/article/rs-1626243/v1
• 9. Tek-Tip: Reduce Bubbles in Clear Casting Resin [Internet]. Polytek Development Corp. [cited 2023 Jan 19]. Available from: https://polytek.com/tutorial/tek-tip-reduce-bubbles-clear-casting-resin
• 10. Yang Y, Li L, Zhao J. Mechanical property modeling of photosensitive liquid resin in stereolithography additive manufacturing: Bridging degree of cure with tensile strength and hardness. Mater Des. 2019 Jan 15;162:418–28.
• 11. ProLine universal testing machine [Internet]. ProLine universal testing machine. Available from: https://www.zwickroell.com/products/static-materials-testingmachines/universal-testing-machines-for-static-applications/proline/
• 12. Petraşcu OL, Manole R, Pascu AM. The behavior of composite materials based on polyurethan resin subjected to uniaxial tensile test. Mater Today Proc. 2022 Jan 1;62:2673–8.
• 13. Son J, Yun S, Park K, Ryu S, Kim S. Isotropic 3D printing using material extrusion of thin shell and post-casting of reinforcement core. Addit Manuf. 2022 Oct;58:102974.
• 14. Dzadz Ł, Pszczółkowski B. Analysis of the influence of UV light exposure time on hardness and density properties of SLA models. Tech Sci [Internet]. 2020 Dec 9 [cited 2023 Jan 19];(2020). Available from: https://czasopisma.uwm.edu.pl/index.php/ts/article/view/6119
• 15. Miedzińska D, Gieleta R, Popławski A. Experimental Study on Influence of Curing Time on Strength Behavior of SLA-Printed Samples Loaded with Different Strain Rates. Materials. 2020 Dec 21;13(24):5825.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).