Investigation of Use of Linden (Tilia tomentosa Moench.) Wood with UV System Varnish Application IN INDOOR Parquet Flooring

• Autorzy: Ayata Ümit , Esteves Bruno , Domingos Idalina , Ferreira José , Tuncay Efe Fatih , Türk Mutlu , Çakicier Nevzat , Gürleyen Levent , Peker Hüseyin

Identyfikatory

DOI

10.53502/wood-177636

• Języki publikacji: EN

Abstrakty

EN

Linden wood is used in the making of musical instruments, agricultural hand tools, and in the furniture sector. In this study, the changes in glossiness (parallel (//) and perpendicular (⊥) to the fibers at 20o, 60o, and 85o), the pull-off adhesion test, color parameters (CIEL) and pendulum hardness (König method) of two different UV curable varnishes applied to linden (Tilia tomentosa Moench.) according to industrial application techniques and exposed to artificial weathering were investigated. According to the research results, while L*, ΔH*, and ho decreased with increasing weathering time in both varnish layers, ΔC*, b*, ΔE*, a*, and C* rose. The pendulum hardness grew for Method B but dwindled for Method A. A decrease was found in the adhesion tests for both varnish methods after artificial weathering. The glossiness was generally reduced due to artificial weathering for all the angles and for both directions, with the exception of 85º in Method A. The variance analysis and homogeneity groups showed that the changes in the adhesion, pendulum hardness, L*, a*, ho, C*, perpendicular and parallel to the fibers for 60o and 85o were found to be significantly different with artificial weathering for both methods.

Słowa kluczowe

EN

linden; weathering; UV cured varnish; color; pendulum hardness; adhesion; glossiness

• Wydawca: Sieć Badawcza Łukasiewicz - Poznański Instytut Technologiczny
• Czasopismo: Drewno : prace naukowe, doniesienia, komunikaty
• Rocznik: 2023
• Tom: Vol. 66, nr 212
• Strony: Art. no. 177636
• Opis fizyczny: Bibliogr. 52 poz., rys., tab., wykr.

Twórcy

autor

Ayata Ümit

• Bayburt University, Faculty of Arts and Design, Department of Interior Architecture and Environmental Design, Bayburt, Turkey

• https://orcid.org/0000-0002-6787-7822

autor

Esteves Bruno

• Polytechnic Institute of Viseu and Research Center for Natural Resources, Environment and Society (CERNAS) Viseu, Portugal

• https://orcid.org/0000-0001-6660-3128

autor

Domingos Idalina

• Polytechnic Institute of Viseu and Research Center for Natural Resources, Environment and Society (CERNAS) Viseu, Portugal

• https://orcid.org/0000-0002-4308-1563

autor

Ferreira José

• Polytechnic Institute of Viseu and Research Center for Natural Resources, Environment and Society (CERNAS) Viseu, Portugal

• https://orcid.org/0000-0001-7596-8065

autor

Tuncay Efe Fatih

• Department of Forestry and Forest Products, Yenice Vocational School, Çanakkale Onsekiz Mart University, Yenice, Çanakkale, Turkey

• https://orcid.org/0000-0002-7247-1288

autor

Türk Mutlu

• Efeler-Mesleki Egitim Merkezi, Aydın, Turkey

• https://orcid.org/0000-0002-8650-1302

autor

Çakicier Nevzat

• Duzce University, Faculty of Forestry, Department of Forest Industry Engineering, Duzce, Turkey

• https://orcid.org/0000-0001-6566-7541

autor

Gürleyen Levent

• Golyaka Vocational and Technical Anatolian High School, Duzce, Turkey

• https://orcid.org/0000-0002-6867-8059

autor

Peker Hüseyin

• Artvin Çoruh University, Department of Forest Industrial Engineering, Artvin, Turkey

• https://orcid.org/0000-0002-7771-6993

Bibliografia

• Aslan S. [1994]. Ağaç Dendrolojisi, Odun Anatomisi, Hacettepe Üniversitesi, Beytepe, Ankara, Turkey.
• Ayata U. [2019]: Effects of artificial aging on the surface properties of ultraviolet varnish applied to lemon-wood (Citrus limon (L.) Burm.). Bioresources 14: 8313-8323. DOI: 10.15376/biores.14.4.8313-8323
• Ayata U., Cakicier N. [2021]: Determination of pendulum hardness (könig method) values against artificial aging in water-based varnishes applied to some wood species after heat treatment (ThermoWood). Drevno 64: 45-61. DOI: 10.12841/wood.1644-3985.381.06
• Ayata U., Cakicier N., Gurleyen L. [2021a]: Determination of the artificial aging performance of the apricot wood applied with UV system parquet varnish used indoors. Furniture and Wooden Material Research Journal 4: 40-50. DOI: 10.33725/mamad.922311
• Ayata U., Cakicier N., Gurleyen L. [2021c]: Determination of some surface properties of UV curable var-nish-applied cedar wood after artificial aging application. Furniture and Wooden Material Research Journal 4: 145-154. DOI: 10.33725/mamad.1005120
• Ayata U., Esteves B., Gurleyen L., Cakicier N., Ferreira J., Domingos I., Turk M. [2021b]. Effect of acceler-ated ageıng on some surface propertıes of UV-coated hackberry (Celtis australis L.) wood parquet. Drevno 64: 17-33. DOI: 10.12841/wood.1644-3985.383.09
• Aytaskin A. [2009]: Some technological properties of wood impregnated with various chemical substances, 134 p. M. Sc. Thesis Karabük University, Graduate School of Natural and Applied Sciences, Department of Furniture and Decoration Education, Karabük, Turkey
• Bal B.C., Ayata U., Cavus V., Efe F.T. [2018]. Determination of screw holding capacity in walnut, maun, chestnut and lime woods. 5th International Congress on Multidisciplinary Studies 02th-03th November 2018, Antalya, Turkey 1: 383-396
• Barański J., Klement I., Vilkovská T., Konopka A. [2017]: High temperature drying process of beech wood (Fagus sylvatica L.) with different zones of sapwood and red false heartwood. BioResources 12: 1861-1870. DOI: 10.15376/biores.12.1.1861-1870
• Bartolomeo P., Irigoyen M., Aragon E., Frizzi M.A., Perrin F.X. [2001]: Dynamic mechanical analysis and Vickers microhardness correlation for polymer coating UV ageing characterization. Polymer Degradation and Stability 72: 63-68. DOI: 10.1016/S0141-3910(00)00203-2
• Cavus V. [2021]: Aging performance of mulberry wood with UV varnish applied and its mechanical properties. BioResources 16: 6791-6798. DOI: 10.15376/biores.16.4.6791-6798
• Clerc G., Brülisauer M., Affolter S., Volkmer T., Pichel-in F., Niemz P. [2017]: Characterization of the ageing process of one-component polyurethane mois-ture curing wood adhesive. International Journal of Adhesion and Adhesives 72: 130-138. DOI: 10.1016/j.ijadhadh.2016.09.008
• Conti F., Abate G., Alessandrini A., Blasi C. [2005]: An annotated Checklist of the Italian vascular flora. vol. 1. Roma (Italy): Palombi Editore; pp. 175.
• Corcione C.E., Frigione M. [2012]: UV-cured polymer-boehmite nanocomposite as protective coating for wood elements. Progress in Organic Coatings 74: 781-787. DOI: 10.1016/j.porgcoat.2011.06.024
• Cui X., Matsumura J. [2019]: Wood surface changes of heat-treated Cunninghamia lanceolate following natural aging, Forests, 10: 791. DOI: 10.3390/f10090791.
• Dawidowicz A.L., Typek R., Dybowski M.P., Nowakowski P. [2019]: Does the increase of radiation energy really reduce the risk of photoinitiator migration from polygraphic varnish to packed product? The influence of UV radiation dose on the migration of 4-phenylbenzophenone from polyacrylate varnish in food packaging. Food Packaging and Shelf Life 20: 100308. DOI: 10.1016/j.fpsl.2019.100308
• de la Caba K., Guerrero P., del Rio M., Mondragon I. [2007]: Aging behaviour of wood-faced construction materials. Construction and Building Materials 21: 1288-1294. DOI: 10.1016/j.conbuildmat.2006.02.008
• Decker C. (1997). in Materials Science and Technology, Processing of Polymers, Vol. 18, p. 615 (Meijer, H. E. H., Editor). Wiley, New York.
• Derbyshire H., Miller E.R. [1981]. The Photodegradation of Wood during Solar Irradiation. Part 1: Effects on the Structural Integrity of Thin Wood Strips. Holz Roh Werkst 39: 341-350.
• Elias T. [1980]. The Complete Trees of N. America, Field Guide and Natural History, Van Nostrand Reinhold Co., ISBN 0442238622.
• Esteves B.M., Herrera R., Santos J., Carvalho L., Nunes L., Ferreira J., Domingos I.J., Cruz-Lopes L. [2020]. Artificial weathering of heat-treated pines from the Iberian Peninsula. BioResources 15: 9642-9655, doi:10.15376/biores.15.4.9642-9655.
• Feist W.C. [1983]. Aging and Protection of Wood; American Wood-Preservers Association: Kansas City, MO, USA, 79: 195-205.
• Feist W.C. [1989]. Outdoor Wood Aging and Protection, In Archaeological Wood: Properties, Chemistry, and Preservation; Rowell, R.M., Barbour, R.J., Eds.; American Chemical Society: Los Angeles, CA, USA.
• Fouassier J.P. [1995]. Photoinitiation, Photopolymerization, and Photocuring, Carl Hanser, Munich.
• Fouassier J.P., Allonas X., Burget D. [2003]. Photopoly-merization reactions under visible lights: principle, mechanisms and examples of applications. Progress in Organic Coatings 47: 16-36. DOI: 10.1016/S0300-9440(03)00011-0
• Fufa S.M., Jelle B.P., Hovde P.J., Rørvik P.M. [2012]. Impregnated wooden claddings and the influence of nanoparticles on the aging performance. Wood Material Science and Engineering 7: 186-195. DOI: 10.1080/17480272.2012.692390.
• Gregorovich B.V., Adamsons K., Lin L. [2001]: Scratch and mar and other mechanical properties as a function of chemical structure for automotive refinish coatings. Progress in Organic Coatings 43: 175-187. DOI: 10.1016/S0300-9440(01)00187-4
• Gurleyen L. [2020]: Effect of artificial aging on the some surface properties of UV system parquet varnish applied to persian silk (Albizia julibrissin) wood. Turk-ish Journal of Forestry 21: 451-460. DOI: 10.18182/tjf.795597
• Gurleyen L. [2021]: Effects of artificial aging on the color, gloss, adhesion, and pendulum hardness of UV sys-tem parquet varnish applied to doussie (Afzelia africana) wood. BioResources 16: 1616-1627. DOI: 10.15376/biores.16.1.1616-1627
• Haralamb A. [1967]: Cultura speciilor forestiere, (Translate it in English), Editura Agro-Silvica, Bucuresti.
• Hoyle C.E., Kinstle J.F. [1992]: Radiation curing of polymeric materials, American Chemical Society, USA.
• Johnson B., McIntyre R. [1996]: Analysis of test methods for UV durability predictions of polymer coatings. Progress in Organic Coatings 27: 95-106. DOI: 10.1016/0300-9440(94)00525-7
• Lecamp L., Youssef B., Bunel C., Lebaudy P. [1999]: Photoinitiated polymerization of a dimethacrylate oligomer: 2. Kinetic studies. Polymer 40: 1403-1409. DOI: 10.1016/S0032-3861(98)00380-2
• Lee B.H., Kim H.J. [2006]: Influence of isocyanate type of acrylated urethane oligomer and of additives on ag-ing of UV-cured films. Polymer Degradation and Stability 91: 1025-1035. DOI: 10.1016/j.polymdegradstab.2005.08.002
• Nichols M.E., Gerlock J.L., Smith C.A., Darr C.A. [1999]: The effects of aging on the mechanical per-formance of automotive paint systems. Progress in Organic Coatings 35: 153-159. DOI: 10.1016/S0300-9440(98)00060-5
• Obataya E., Norimoto M., Gril J. [1998]: The effects of adsorbed water on dynamic mechanical properties of wood. Polymer 39: 3059-3064.
• Peng Y., Wang Y., Chen P., Wang W., Cao J. [2020]: Enhancing aging resistance of wood by using bark extractives as natural photostabilizers in polyure-thane-acrylate coating. Progress in Organic Coatings 145: 105665. DOI: 10.1016/j.porgcoat.2020.105665
• Rabek J.F. [1987]: Mechanisms of Photophysical and Photochemical Reactions in Polymers: Theory and Practical Applications, Wiley, New York.
• Robertson A.R. [1977]: The CIE 1976 color-difference formulae. Color Research & Application 2: 7-11.
• Sadeghifar H., Ragauskas A. [2020]: Lignin as a UV Light Blocker - A Review. Polymers 12: 1134.
• Seo T.W., Weon J.I. [2012]. Influence of aging and sub-strate roughness on the interfacial adhesion of acryl-ic coating based on an increasing load scratch test. Journal of Materials Science 47: 2234-2240. DOI: 10.1007/s10853-011-6034-2
• Sogutlu C., Sonmez A. [2006]: The effect of UV lights on color changes on some local wood processed with differential preservatives. Journal of the Facul-ty of Engineering and Architecture of Gazi University 21: 151-159
• Sonmez A. [1989]: Durability of varnishes used on surfaces of wooden furniture against important physical mechanical and chemical effects. 142 p. Ph D. Thesis Gazi University, Institute of Science and Technolo-gy, Ankara, Turkey
• Sow C., Riedl B., Blanchet P. [2011]: UV-waterborne polyurethane-acrylate nanocomposite coatings containing alumina and silica nanoparticles for wood: mechanical, optical, and thermal properties assessment. Journal of Coatings Technology and Research 8: 211-221. DOI: 10.1007/s11998-010-9298-6
• Tolvaj L., Faix O. [1995]: Artificial ageing of wood moni-tored by DRIFT spectroscopy and CIE L*a*b* color measurements, I. Effect of UV light. Holzforschung 49: 397-404.
• List of standards
• ASTM D 2244-3:2007 Standard practice for calculation or color tolerances and color, differences from in-strumentally measured color coordinates. ASTM In-ternational, West Conshohocken, PA
• ASTM D 4366-95:1984 Standard test methods for hardness of organic coatings by pendulum test. ASTM, Philadelphia, PA
• ASTM D 4541:1995 Standard test method for pull-off strength of coatings using portable adhesion testers. ASTM International, West Conshohocken, PA
• DIN EN ISO/IEC 17025:2016 General requirements for the competence of testing and calibration laboratories. German Institute for Standardization, Berlin, Germany
• ISO 2813:1994 Paints and varnishes – determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees. International Or-ganization for Standardization, Geneva, Switzerland
• ISO 4892-3:2016 Plastics – methods of exposure to labor-atory light sources – Part 3: Fluorescent UV lamps. The International Organization for Standardization
• TS ISO 13061-1:2021 Physical and mechanical properties of wood - test methods for small clear wood specimens – Part 1: Determination of moisture content for physical and mechanical tests, Turkish Standards Institution, Ankara, Turkey.