Assessment of the resistance to external factors of low-density polyethylene modified with natural fillers

• Autorzy: Głogowska K. , Majewski Ł. , Gajdoš I. , Mitaľ G.

Identyfikatory

DOI

10.12913/22998624/75984

• Języki publikacji: EN

Abstrakty

EN

The study reports the results of investigation of basic processing and thermal properties of low-density polyethylene modified with two types of natural filler: wheat bran and pumpkin seed hulls, their content ranging from 5% to 15% relative to the matrix. In addition, physical properties of the produced granulates are determined, i.e. the relationship between their density and the applied contents of the tested fillers. Furthermore, the study reports the results concerning longitudinal shrinkage, abrasion resistance and cold water absorption of injection molded tensile specimens.

Słowa kluczowe

EN

natural filler; low-density polyethylene; injection molding

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2017
• Tom: Vol. 11, no 4
• Strony: 35--40
• Opis fizyczny: Bibliogr. 20 poz., fig., tab.

Twórcy

autor

Głogowska K.

• Lublin University of Technology, Faculty of Mechanical Engineering, Department of Polymer Processing, 36 Nadbystrzycka Street, 20-618 Lublin, Poland

autor

Majewski Ł.

• Lublin University of Technology, Faculty of Mechanical Engineering, Department of Polymer Processing, 36 Nadbystrzycka Street, 20-618 Lublin, Poland

autor

Gajdoš I.

• Technical University of Košice, Faculty of Mechanical Engineering, Institute of Technologies and Management. Mäsiarska 74, Košice 040 01, Slovak Republic

autor

Mitaľ G.

• Technical University of Kosice with a seat in Prešov, Faculty of Manufacturing Technologies, Department of Automobile and Manufacturing Technology, Bayerova 1, 080 01 Prešov, Slovak Republic

Bibliografia

• 1.Chomiak M. and Stabik J. Wpływ cząstek węgla kamiennego na twardość i ścieralność polimerowych materiałów gradientowych. Przetwórstwo Tworzyw, 6, 2013, 582-591.
• 2.Chou T. Structure and Properties of Composites. Materials Science and Technology, Volume 13: Structure and properties of composites. VCH Verlagsgesellschaft, Weinheim 1993.
• 3.Chruściel J., Leśniak E. and Fejdys M. Carbofunctional silanes and polysiloxanes. Part I. Applications of carbofunctional silanes. Polymer, 10, 2008, 709-716.
• 4.Czupryński B., Liszowska J. and Sadowsa-Paciorek J. Modyfikacja sztywnej pianki poliuretanowo-poliizocyjanurowej wybranymi napełniaczami proszkowymi. Polimery, 2, 2008, 133-137.
• 5.Essabir H., Hilali E. and others. Mechanical and thermal properties of bio-composites based on polypropylene reinforced with Nut-shells of Argan particles. Materials&Design, 49, 2013, 442-448.
• 6.Fisher J. M. Handbook of molded part shrinkage and warpage. Plastic Design Library, William Andrew Inc., Norwich 2003.
• 7.George J., Kumar R. and others: Rice bran-filled biodegradable low-density polyethylene films. Development and characterization for packaging applications. Journal of Applied Polymer Science, 5, 2006, 4514-4522.
• 8.Hassan A., Salema A. A. and others. A review on oil palm empty fruit bunch fiber-reinforced polymer composite materials. Polymer Composites, 31, 2010, 2079-2101.
• 9.Jagadish R. S., Raj B. and Asha M. R. Blending of low-density polyethylene with vanillin for improved barrier and aroma-releasing properties in food packaging. Applied Polymer, 113, 2009, 3732-3741.
• 10.Katz H. and Milewski J. Handbook of fillers for plastics. Van Nostrand Reinhold, New York 1987.
• 11.Khait K. and Carr S.H. Solid-State Shear Pulverization. Technomic Publishing Company Inc. Lancaster, PA, USA 2001.
• 12.Murali Mohan Rao K., Mohana Rao K., Ratna Prasad A. V. Fabrication and testing of natural fibre composites: Vakka, sisal, bamboo and banana. Materials&Design, 31, 2010, 508-513.
• 13.Narkis M. and Rozenzweig N. Polymer Powder Technology. John Wiley & Sons New York 1995.
• 14.Nuraya A. S., Baharin A. and Azura A. R. Influence of banana stem powder on knotty tear behaviour of prevulcanised natural rubber latex composite films. Plastics, Rubber and Composites: Macromolecular Engineering, 44, 2015, 265-272.
• 15.Rattanasom N., Saowapark T. and Deepprasertkul C. Reinforcement of natural rubber with silica/carbon black hybrid filler. Polymer Testing, 26, 2007, 369-377.
• 16.Rosato D. V. and Rosato M. G. Injection Molding Handbook. Kluwer Academic Publisher, Norwell 2000.
• 17.Rothon R. Particulate-Filled Polimer Composites, Second Edition. Rapra Technology Limited, Shawbury 2003.
• 18.Sterzyński T. and Kubczak M. Wysokonapełnione kompozyty polietylen/mata ołowian baru do zastosowań w bipolarnych akumulatorach kwasowo-ołowiowych. Polimery, 2, 2006, 150-153.
• 19.Stevenson L., Phillips F. and others. Wheat bran: its composition and benefits to health, a European perspective. International Journal of Food Sciences and Nutrition, 63, 2012, 1001-1013.
• 20.Tor-Świątek A., Garbacz T., Jachowicz T.: Quantitative assessment of the microscopic structure of extruded and injected low-density polyethylene modified with microspheres by image analysis. Cellular Polymers, 2, 35, 2016, 67-84.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)