Microstructure and Porosity of 3YSZ Solid Electrolyte Prepared Using Organic Polymeric Matrix

• Autorzy: Dziubaniuk M. , Dróżdż E. , Wyrwa J. , Rękas M.

Identyfikatory

DOI

10.24425/amm.2019.127609

• Języki publikacji: EN

Abstrakty

EN

Two different complexing agents, namely citric acid and gelatin, were used for gel-combustion synthesis of yttria stabilized zirconia. The influence of synthesis conditions on properties of powders and sintered bodies was studied by X-ray Diffraction Analysis (XRD), Scanning Electron Microscope (SEM) and helium pycnometer measurements.

Słowa kluczowe

EN

yttria stabilized zirconia; gel-combustion synthesis; gelatin complexing agent

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 2
• Strony: 753--758
• Opis fizyczny: Bibliogr. 13 poz., fot., rys., tab.

Twórcy

autor

Dziubaniuk M.

• AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Dróżdż E.

• AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Wyrwa J.

• AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Rękas M.

• AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Al. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• [1] M. Z. C. Hu, R. D. Hunt, E. A. Payzant, C. R. Hubbard, Am. Ceram. Soc. 82 (9), 2313-2320 (1999), DOI: 10.1111/j.1151-2916.1999.tb02085.x
• [2] H. Wang, H. Huang, J. Liang, J. Liu, Ceram. Int. 40, 3995-3999 (2014), DOI: 10.1016/j.ceramint.2013.08.050
• [3] M. Marinsek, K. Zupan, J. Maèek, J. Power Sources 106 (1-2), 178-188 (2002), DOI: 10.1016/S0378-7753(01)01056-4
• [4] T. I. Politova, J.T.S. Irvine, Solid State Ionics 168, 153-165 (2004), DOI: 10.1016/j.ssi.2004.02.007.
• [4] H. Wang, H. Huang, J. Liang, J. Liu, Ceram. Int. 40, 3995-3999 (2014), DOI: 10.1016/j.ceramint.2013.08.050
• [5] Y. Xie, J. Am. Ceram. Soc. 82 (3), 768-770 (1999), DOI: 10.1111/j.1151-2916.1999.tb01832.x
• [6] O. Yamamoto, Y. Arati, Y. Takeda, N. Imanishi, Y. Mizutani, M. Kawai, Solid State Ionics 79, 137-142 (1995), DOI: 10.1016/0167-2738(95)00044-7.
• [7] J. C. Ray, C. R. Saha, P. Pramanik, J. Eur. Ceram. Soc. 22, 851-862, (2002), DOI: 10.1016/S0955-2219(01)00404-6.
• [8] D. J. L. Brett, A. Atkinson, N. Brandon, S. Skinner, Chem. Soc. Rev. 37, 1568-1578 (2008), DOI: 10.1039/B612060C
• [9] S. Tao, J. T. S. Irvine, J. Solid State Chem. 165, 12-18 (2002), DOI: 10.1006/jssc.2001.9477.
• [10] R. E. Juárez, D. G. Lamas, G. E. Lascalea, N. E. Walsöe de Reca, J. Eur. Ceram. Soc. 20, 133-138 (2000), DOI: 10.1016/S0965-9773(98)00144-5
• [11] A. Khorsand Zak, W. H. Abd. Majid, M. Darroudi, R. Yousefi, Mater. Lett. 65, 70-73 (2011), DOI: 10.1016/j.matlet.2010.09.029
• [12] A. Khorsand Zak, W. H. Abd. Majid, M. Darroudi, Mater. Chem. Phys. 136, 705-709 (2012), DOI: 10.1016/j.matchemphys.2012.07.045

Uwagi

EN

1. The financial support of National Science Centre, grant 2016//23/B/ST8/00163 is gratefully acknowledged.

PL

2. Błędna numeracja bibliografii

PL

3. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).