Mechanical performance of glulam beam-to-column connections with coach screws as fasteners

• Autorzy: He Minjuan , Li Minmin , Li Zheng , He Guirong , Sun Yongliang

Identyfikatory

DOI

10.1007/s43452-021-00207-5

• Języki publikacji: EN

Abstrakty

EN

The mechanical performance of beam-to-column connections plays an essential role in the design of post-and-beam glulam structures. This paper presents an investigation into the mechanical performance of glulam beam-to-column connections with coach screws as fasteners. A series of monotonic and reversed cyclic loading tests were conducted on the beam-to-column connections with coach screws, and the failure modes, moment-resisting capacity, stiffness, ductility and energy dissipation of the connections were analyzed. Results showed that the use of coach screws was an effective way to increase the initial stiffness, ductility and energy dissipation of the glulam beam-to-column connections. The strength of coach screws and glulam members was fully developed, and the moment-resisting capacity of the beam-to-column connections was improved due to the adoption of the coach screws. It was noted that the rotational deformation and energy dissipation of the beam-to-column connections was mainly governed by the mechanical performance of the screwed connections. Moreover, a separating analytical method and a finite element model were established for the tested glulam beam-to-column connections, and results indicated that the stress distribution, deformation and moment–rotation relationships of the connections can be predicted efficaciously versus the test results.

Słowa kluczowe

EN

glulam; beam-to-column connection; coach screws; mechanical performance; finite element analysis

PL

drewno klejone warstwowo; właściwości mechaniczne; analiza elementów skończonych

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2021
• Tom: Vol. 21, no. 2
• Strony: 180--196
• Opis fizyczny: Bibliogr. 47 poz., fot., rys., tab., wykr.

Twórcy

autor

He Minjuan

• Department of Structural Engineering, Tongji University, Shanghai 200092, China

autor

Li Minmin

• Department of Structural Engineering, Tongji University, Shanghai 200092, China

autor

Li Zheng

• Department of Structural Engineering, Tongji University, Shanghai 200092, China

• https://orcid.org/0000-0003-1227-8168

autor

He Guirong

• Department of Structural Engineering, Tongji University, Shanghai 200092, China

autor

Sun Yongliang

• Department of Structural Engineering, Tongji University, Shanghai 200092, China

Bibliografia

• [1] Shu Z, Li Z, Yu X, Zhang J, He M. Rotational performance of glulam bolted joints: experimental investigation and analytical approach. Constr Build Mater. 2019;213:675–95.
• [2] Wang M, Song X, Gu X. Numerical simulation of rotational behavior of bolted glulam beam-to-column connections with slotted-in steel plates. Appl Mech Mater. 2016;858:22–8.
• [3] He M, Zhang J, Li Z. Influence of cracks on the mechanical performance of dowel type glulam bolted joints. Constr Build Mater. 2017;153:445–58.
• [4] Ghabussi A, Marnani J, Rohanimanesh M. Improving seismic performance of portal frame structures with steel curved dampers. Structures. 2020;24:27–40.
• [5] Li Z, He M, Wang K. Hysteretic performance of self-centering glulam beam-to-column connections. J Struct Eng. 2018;144(5):04018031.
• [6] He M, Zhao Y, Ma R. Experimental investigation on lateral performance of pre-stressed tube bolted connection with high initial stiffness. Adv Struct Eng. 2016;19(5):762–76.
• [7] Ma Y, Song X, Xu T, Luo L. Rotational behavior of bolted glulam beam-to-column connections reinforced with section steel. Appl Mech Mater. 2016;858:15–21.
• [8] Shu Z, Li Z, He M, Zheng X, Wu T. Seismic design and performance evaluation of self-centering timber moment resisting frames. Soil Dyn Earthqu Eng. 2019;119:346–57.
• [9] Araki Y, Endo T, Iwata M. Feasibility of improved slotted bolted connection for timber moment frames. J Wood Sci. 2011;57(3):247–53.
• [10] Sun X, He M, Li Z. Novel engineered wood and bamboo composites for structural applications: state-of-art of manufacturing technology and mechanical performance evaluation. Constr Build Mater. 2020;249:118751.
• [11] Gao J, Koopialipoor M, Armaghani D, Ghabussi A, Baharom S, Morasaei A, Shariati A, Khorami M, Zhou J. Evaluating the bond strength of FRP in concrete samples using machine learning methods. Smart Struct Syst. 2020;26:403–18.
• [12] Shariati A, Ghabussi A, Habibi M, Safarpour H, Safarpour M, Tounsi A, Safa M. Extremely large oscillation and nonlinear frequency of a multi-scale hybrid disk resting on nonlinear elastic foundation. Thin-Walled Struct. 2020;154:106840.
• [13] Safarpour M, Ghabussi A, Ebrahimi F, Habibi M, Safarpour H. Frequency characteristics of FG-GPLRC viscoelastic thick annular plate with the aid of GDQM. Thin-Walled Struct. 2020;150:106683.
• [14] Song X, Ma Y, Gu X, Wang M. Carbon fiber-reinforced polymer reinforcement for rotational behavior of bolted glulam beam-to-column connections. J Compos Constr. 2017;21(3):04016096.
• [15] Wang M, Song X, Gu X, Zhang Y, Luo L. Rotational behavior of bolted beam-to-column connections with locally cross-laminated Glulam. J Struct Eng. 2015;141(4):04014121.
• [16] Ogrizovic J, Wanninger F, Frangi A. Experimental and analytical analysis of moment-resisting connections with glued-in rods. Eng Struct. 2017;145:322–32.
• [17] Xiong H, Liu Y, Yao Y, Li B. Experimental study on the lateral resistance of reinforced glued-laminated timber post and beam structures. J Asian Archit Build. 2017;16(2):379–85.
• [18] He M, Liu H. Comparison of glulam post-to-beam connections reinforced by two different dowel-type fasteners. Constr Build Mater. 2015;99:99–108.
• [19] Smith T, Ponzo F, Di Cesare A, Pampanin S, Carradine D, Buchanan A, Nigro D. Post-tensioned glulam beam-column joints with advanced damping systems: testing and numerical analysis. J Earthq Eng. 2014;18(1):147–67.
• [20] Karagiannis V, Malaga-Chuquitaype C, Elghazouli A. Behaviour of hybrid timber beam-to-tubular steel column moment connections. Eng Struct. 2017;131:243–63.
• [21] Li Z, Wang X, He M. Experimental and analytical investigations into lateral performance of cross laminated timber (CLT) shear walls with different construction methods. J Earthq Eng. 2020. https ://doi.org/10.1080/13632 469.2020.18156 09.
• [22] Bedon C, Fragiacomo M. Three-dimensional modelling of notched connections for timber-concrete composite beams. Struct Eng Int. 2017;27(2):184–96.
• [23] Symons D, Persaud R, Stanislaus H. Slip modulus of inclined screws in timber-concrete floors. Struct Build. 2010;163:245–55.
• [24] Sebastian W, Piazza M, Harvey T, Webster T. Forward and Reverse shear transfer in beech LVL-concrete composites with singly inclined coach screw connectors. Eng Struct. 2018;175:231–44.
• [25] Hassanieh A, Valipour H, Bradford M. Experimental and analytical behaviour of steel-timber composite connections. Constr Build Mater. 2016;118:63–75.
• [26] Bradford M, Hassanieh A, Valipour H, Foster S. Sustainable steel-timber joints for framed structures. In: 12th International Conference on Modern Building Materials, Structures and Techniques. 2017; Vilnius, Lithuania.
• [27] Hassanieh A, Valipour H, Bradford M. Load-slip behaviour of steel-cross laminated timber (CLT) composite connections. J Constr Steel Res. 2016;122:110–21.
• [28] Jiang Y, Hong W, Hu X, Crocetti R, Wang L, Sun W. Early-age performance of lag screw shear connections for glulam-lightweight concrete composite beams. Constr Build Mater. 2017;151:36–42.
• [29] Du H, Hu X, Jiang Y, Wei C, Hong W. Loading carrying capacity of self tapping lag screws for glulam-lightweight concrete composite beams. BioResources. 2019;14(1):166–79.
• [30] Standards Press of China. Technical code of glued laminated timber structures, GB/T 50708-2012. Beijing: Standards Press of China; 2012. p. 2012.
• [31] Standards Press of China. Mechanical properties of fasteners bolts, screws and studs, GB3098-2000. Beijing: Standards Press of China; 2000.
• [32] American Society for Testing and Materials (ASTM). Standard test methods for small clear specimens of timber, ASTM D143-09, PA, USA, 2000.
• [33] Hong J, Barrett D. Three-dimensional finite-element modeling of nailed connections in wood. J Struct Eng. 2010;136(6):715–22.
• [34] Hong J, Barrett D. Three-dimensional finite solid element model for Japanese post and beam connection. In: Proceeding of 10th world conference on timber engineering (WCTE). 2008; Miyazaki, Japan.
• [35] American Society for Testing and Materials (ASTM). Standard test methods for evaluating dowel-bearing strength of wood and wood-based products, ASTM D5764-97a, PA, USA, 2018.
• [36] Standards Press of China. Standard for design of timber structure, GB/T 50005-2017. Beijing: Standards Press of China; 2017.
• [37] Standards Press of China. Standard for design of steel structure, GB 50017-2017. Beijing: Standards Press of China; 2017.
• [38] American Society for Testing and Materials (ASTM). Standard test methods for cyclic (reversed) load test for shear resistance of vertical elements of the lateral for resisting systems for building, ASTM E2126-11, PA, USA, 2012.
• [39] Porteous J, Kermani A. Structural timber design to eurocode 5. Wiley; 2013.
• [40] American Society for Testing and Materials (ASTM). Standard Test Methods for Mechanical Fasteners in Wood, ASTM D1761-12, PA, USA, 2012.
• [41] Yasumura M, Kawai N. Estimating seismic performance of wood-framed structures. In: Proceedings of the 5th world conference on timber engineering. 1998; Lausanne.
• [42] Muñoz W, Mohammad M, Salenikovich A. Determination of yield point and ductility of timber assemblies: in search for a harmonised approach. In: Proceedings of the 10th world conference in timber engineering. 2008; Miyazaki, Japan.
• [43] European Committee for Standardization (CEN), Eurocode 5: design of timber structure prat 1–1. General Common Rules and Rules for Buildings, EN1995-1-1, Brussels, Belgium, 2004.
• [44] Smith I, Asiz A, Snow M, Chui I. Possible Canadian/ISO approach to deriving design values from test data. In: Proceedings of the 39th meeting, international council for research and innovation in building and construction working commission W18-timber structures. 2006; KIT, Karlsruhe, Germany.
• [45] Closen M, Lam L. Performance of moment resisting self-tapping screw assembly under reverse cyclic load. In: 2012 world conference on timber engineering. 2012; Auckland, New Zealand.
• [46] Yeh M, Lin Y, Huang G. Investigation of the structural performance of glulam beam connections using self-tapping screws. J Wood Sci. 2014;60(1):39–48.
• [47] Moayedi H, Darabi R, Ghabussi A, et al. Weld orientation effects on the formability of tailor welded thin steel sheets. Thin-Walled Struct. 2020;149:106669.