Archives of Metallurgy and Materials - Tom Vol. 62, iss. 2B (2017) - BazTech - Yadda

Tom - szczegóły

Tytuł artykułu

Vol. 62, iss. 2B

Czasopismo

Archives of Metallurgy and Materials

Wydawca

Institute of Metallurgy and Materials Science of Polish Academy of Sciences
Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences

Rocznik

2017

Identyfikatory

Zawartość wolumenu

Vol. 62, iss. 2B
- artykuł: Disruption of an Alumina Layer During Sintering of Aluminium in Nitrogen (Pieczonka T.), s. 987--992
- artykuł: Effect of Ga2O3 Nanoparticles Dispersion on Microstructure and Thermoelectric Properties of p-Type BiSbTe Based Alloys (Kim E.-B., Koo J.-M., Hong S.-J.), s. 993--997
- artykuł: Characterization of Cu and Ni Nano-Fluids Synthesized by Pulsed Wire Evaporation Method (Kim H.-S., Yilmaz F., Dharmaiah P., Lee D.-J, Lee T.-H., Hong S.-J.), s. 999--1004
- artykuł: Effect of Surfactant Addition on Bi2Te3 Nanostructures Synthesized by Hydrothermal Method (Dharmaiah P., Lee C. H., Madavali B., Hong S.-J.), s. 1005--1010
- artykuł: Solvent Extraction of Co, Ni and Mn from NCM Sulfate Leaching Solution of Li(NCM)O2 Secondary Battery Scraps (Hong H. S., Kim D. W., Choi H. L., Ryu S.-S.), s. 1011--1014
- artykuł: Increasing the Surface Hardness of Cast Iron by Electrodeposition of Borides in Molten Salts (Al-Azzawi A. H., Sytchev J., Baumli P.), s. 1015--1018
- artykuł: Enhancement of Life Time of the Dimensionally Stable Anode for Copper Electroplating Applications (Son S. H., Park S. C., Lee M. S.), s. 1019--1022
- artykuł: Crystallization Behavior of Zr62Al8Ni13Cu17 Metallic Glass (Jo M. S., Lee J. K.), s. 1023--1026
- artykuł: Whisker-Like Formations in Sn-3.0Ag-Pb Alloys (Koncz-Horváth D., Gergely G., Gacsi Z.), s. 1027--1031
- artykuł: Development of Crack Detection Method with 2 Dimensionally Generated 3 Dimensionally Reconstructed Images in THT Solder Joints (Gergely G., Koncz-Horváth D., Weltsch Z., Gacsi Z.), s. 1033--1038
- artykuł: Fabrication of AZ31/CNT Surface Nano-composite by Double-pass Friction Stir Processing (Kim J. Y., Hwang J.-W., Kim H. Y., Lee S. M., Jung W.-S., Byeon J.-W.), s. 1039--1042
- artykuł: The Effect of Additive Element on the Properties of Mechanically Alloyed Fe-Y2O3 Alloys (Ahn J.-H., Kim T. K., Ahn J.), s. 1043--1046
- artykuł: Impact Characteristic According to the Structure of Crash Box at the Vehicle (Min B. S., Cho J. U.), s. 1047--1050
- artykuł: Reaction Kinetics and Morphological Study of TiNb2O7 Synthesized by Solid-State Reaction (Choi S. H., Ali B., Choi K. S., Hyun S. K., Sim J. J., Choi W. J., Joo W., Lim J. H., Lee T. H., Kim T. S., Park K. T.), s. 1051--1056
- artykuł: Fabrication of a Spherical Titanium Powder by Combined Combustion Synthesis and DC Plasma Treatment (Choi S. H., Ali B., Hyun S. K., Sim J. J., Choi W. J., Joo W., Lim J. H., Lee Y. J., Kim T. S., Park K. T.), s. 1057--1062
- artykuł: Correlation Between Pin Misalignment and Crack Length in THT Solder Joints (Molnar A., Benke M., Gacsi Z.), s. 1063--1066
- artykuł: Synthesis and Characterization of Antimony Telluride for Thermoelectric and Optoelectronic Applications (Zybała R., Mars K., Mikuła A., Bogusławski J., Soboń G., Sotor J., Schmidt M., Kaszyca K., Chmielewski M., Ciupiński L., Pietrzak K.), s. 1067--1070
- artykuł: Investigation of Multicomponent Lead-Free Solders (Gyenes A., Benke M., Teglas N., Nagy E., Gacsi Z.), s. 1071--1074
- artykuł: Challenges of Using Elemental Nickel and Titanium Powders for the Fabrication of Monolithic NiTi Parts (Farvizi M.), s. 1075--1079
- artykuł: Effect of Hafnium and Zirconium to Glass Forming Ability, Thermal Stability, Plasticity Deformation and Crystallization of Ni-Free Pentabasic Ti-Based Bulk Metallic Glasses (Oak J.-J., Kim Y. H., Bae K.-C., Park Y. H.), s. 1081--1087
- artykuł: Structural Properties and Mechanical Behavior of the 2 Step-Reinforced Al-Si/SiCp Metal Matrix Composite by Titanium-Fiber (Oak J.-J., Lee Y. C., Park Y. H.), s. 1089--1097
- artykuł: High-temperature Oxidation Behavior and Kinetics of Forged 12Cr-MoVW Steel (Kim Y. H., Oak J.-J., Bae K.-C., Lee W-J., Park Y. H.), s. 1099--1104
- artykuł: Effect of Fe Content on the Microstructure and Mechanical Properties of Ti-Al-Mo-V-Cr-Fe Alloys (Bae K.-C., Oak J.-J., Kim Y. H., Park Y. H.), s. 1105--1108
- artykuł: Microstructure and Mechanical Properties of Al-3 Vol% CNT Nanocomposites Processed by High-Pressure Torsion (Asgharzadeh H., Kim H. S.), s. 1109--1112
- artykuł: Fabrication of High-Strength Gray Cast Iron Using Permanent Magnet Scrap (Park S.-Y., Kim J. H., Seo S. J., On J. S., Lim K. M.), s. 1113--1117
- artykuł: Carbon Co-Deposition During Gas Reduction of Water-Atomized Fe-Cr-Mo Powder (Ali B., Choi S. H., Seo S. J., Maeng D. Y., Lee C. G., Kim T. S., Park K. T.), s. 1119--1124
- artykuł: Synthesis and Characterization of Si Oxide Coated Nano Ceria by Hydrolysis, and Hydrothermal Treatment at Low Temperature (Kong M., Kim H. W.), s. 1125--1129
- artykuł: Effect of Ultrasonication Dispersion Technique on Sintering Properties of CNT Reinforced Al-Zn-Mg-Cu Powder (Rudianto H., Edtmaier C., Dlouhy I., Soukal F.), s. 1131--1135
- artykuł: Preparation of Submicroscale Ag-Coated Cu Particles by Multi-Step Addition of Ag Plating Solution and Antioxidation Properties for Different Ag Shell Thicknesses (Choi E. B., Lee J.-H.), s. 1137--1142
- artykuł: Transient Liquid Phase Behavior of Sn-Coated Cu Particles and Chip Bonding using Paste Containing the Particles (Hwang J. H., Lee J.-H.), s. 1143--1148
- artykuł: Advances in Powder Metallurgy Soft Magnetic Composite Materials (Bureš R., Strečková M., Fáberová M., Kollár P., Füzer J.), s. 1149--1154
- artykuł: Examination of Clustering in Eutectic Microstrcture (Bortnyik K., Barkóczy P.), s. 1155--1159
- artykuł: Recycling of Gallium from End-of-Life Light Emitting Diodes (Nagy S., Bokányi L., Gombkötő I., Magyar T.), s. 1161--1166
- artykuł: Investigation of the Microstructure and Thermoelectric Properties of P-Type BiSbTe Alloys by Usage of Different Revolutions Per Minute (RPM) During Mechanical Milling (Yoon S.-M., Madavali B., Yoon Y.-N., Hong S.-J.), s. 1167--1171
- artykuł: Effect of Acid Dissolution Conditions on Recovery of Valuable Metals from Used Plasma Display Panel Scrap (Kim C.- M., Dharmaiah P., Kim H.-S., Koo J.-M., Yoon J.-S., Hong S.-H., Hong S.-J.), s. 1173--1177
- artykuł: Improved Mechanical Properties of Al-Si Alloys by Adding an Extrusion Process to Conventional Processing Method (Han J. Y., Femi O. E., Kilicaslan F., Jeong C. U., Baeg C. H., Hong S. J., Koo J. M.), s. 1179--1183
- artykuł: Effect of Alloying Elements on Plastic Workability and Corrosion Behavior of Ti-X (X = 6 Co, 8 Cr, 4 Fe, 6 Mn, 10 Mo, and 36 Nb) Binary Alloys (Zhao Z., Lee K.), s. 1185--1190
- artykuł: Compressive Deformation Behavior of Thick Micro-Alloyed HSLA Steel Plates at Elevated Temperatures (Lee J.-H., Kim D.-O., Lee K.), s. 1191--1196
- artykuł: Magnetic Properties of (Nia-Znb)X Cu1-X Ferrite Nanoparticle Fabricated by Sol-Gel Process (Yang S., Kim J.-G.), s. 1197--1200
- artykuł: Influence of Substituted Elements on Reflection Loss of Ba-Ferrite Nanoparticle (Yang S., Jeong K.-P., Park S.-Y., Kim J.-G.), s. 1201--1204
- artykuł: Optimization of Roll Bonding by Hot Rolling in Experimental and Industrial Use (Szabó G.), s. 1205--1208
- artykuł: Effect of Laser Preheating AISI 4140 Specimens for Micro-Forging (Jung C., Lee M. G., Jeon Y.), s. 1209--1213
- artykuł: Sintering and Microstructures of SUS 316L Powder Produced by 3D Printing Process (Kim W. J., Nguyen H.-H., Kim H. Y., Nguyen M.-T., Park H. S., Kim J.-C.), s. 1215--1218
- artykuł: Fabrication and Characterization of Ni-CNT Composites by Electrical Explosion of Wire in Different Liquids (Thuyet-Nguyen M., Maithili-Biswas, Kim W. J., Kim J.-C.), s. 1219--1223
- artykuł: Effect of Electroless Ni–P Plating on the Bonding Strength of Bi–Te-Based Thermoelectric Modules (Kim S. S., Son I., Kim K. T.), s. 1225--1229
- artykuł: Synthesis and Characterization of Black CoFe2O4 Pigments Using MOOH (M = Fe and Co) Nanorod (Yu R., Yun J., Kim Y.), s. 1231--1234
- artykuł: Effect of Wetting Agent and Carbide Volume Fraction on the Wear Response of Aluminum Matrix Composites Reinforced by WC Nanoparticles and Aluminide Particles (Lekatou A., Gkikas N., Karantzalis A. E., Kaptay G., Gacsi Z., Baumli P., Simon A.), s. 1235--1242
- artykuł: Effect of Local Strain Distribution of Cold-Rolled Alloy 690 on Primary Water Stress Corrosion Crack Growth Behavior (Kim S.-W., Ahn T.-Y., Lim Y.-S., Hwang S.-S.), s. 1243--1248
- artykuł: Thermal Diffusion of 57Co into Rh Foil for Preparing Mössbauer Source (Uhm Y. R., Kim J. J., Choi S. M., Son K. J.), s. 1249--1252
- artykuł: Microstructure Evolution of Ni-Based ODS Superalloy Powders During Horizontal Rotary Ball Milling (Lee H.-E., Kim Y. S., Park J. K., Oh S.-T.), s. 1253--1255
- artykuł: Effect of Grinding Fineness of Fly Ash on the Properties of Geopolymer Foam (Szabó R., Gombkötö I., Svéda M., Mucsi G.), s. 1257--1261
- artykuł: Microstructure and Magnetic Properties of NdFeB Sintered Magnets Diffusion-Treated with Cu/Al Mixed Dyco Alloy-Powder (Lee M.-W., Bae K.-H., Lee S.-R., Kim H.-J., Jang T.-S.), s. 1263--1266
- artykuł: Hardness and Microstructure of Mixed Al-CNF Powder Extrusion (Kim D.-H., Kim T.-J., Lim S.-G.), s. 1267--1270
- artykuł: Study on Effects of Mold Temperature on the Injection Molded Article (Han J.-H., Kim Y.-C.), s. 1271--1274
- artykuł: Improved Long-Term Stability of Transparent Conducting Electrodes Based on Double-Laminated Electrosprayed Antimony Tin Oxides and Ag Nanowires (Koo B.-R., Bae J.-W., Ahn H.-J.), s. 1275--1279
- artykuł: Spontaneous Formation of Titanium Nitride on the Surface of a Ti Rod Induced by Electro-Discharge-Heat-Treatment in an N2 Atmosphere (Lee W. H., Yoon Y. H., Kim Y. H., Lee Y. K., Kim J. Y., Chang S. Y.), s. 1281--1285
- artykuł: Surface Modification of Self-Consolidated Microporous Ti Implant Compacts Fabricated by Electro-Discharge-Sintering in Air (Jo Y. J., Yoon Y. H., Kim Y. H., Chang S. Y., Kim J. Y., Lee Y. K., Van Tyne C. J., Lee W. H.), s. 1287--1291
- artykuł: Self-Consolidation and Surface Modification of Mechanical Alloyed Ti-25.0 at.% Al Powder Mixture by Using an Electro-Discharge Technique (Chang S. Y., Jang H. S., Yoon Y. H., Kim Y. H., Kim J. Y., Lee Y. K., Lee W. H.), s. 1293--1297
- artykuł: Self-Consolidation Mechanism of Ti5Si3 Compact Obtained by Electro-Discharge-Sintering Directly from Physically Blended Ti-37.5 At.% Si Powder Mixture (Chang S. Y., Cheon Y. W., Yoon Y. H., Kim Y. H., Kim J. Y., Lee Y. K., Lee W. H.), s. 1299--1302
- artykuł: Thermal Conductivity and Microstructure of Copper Coated Graphite Composite by Spark Plasma Sintering Process (Park S. H., Kim D. B., Lee R. G., Son I. J.), s. 1303--1306
- artykuł: Copper-Carbon Nanoforms Composites - Processing, Microstructure and Thermal Properties (Pietrzak K., Gładki A., Frydman K., Wójcik-Grzybek D., Strojny-Nędza A., Wejrzanowski T.), s. 1307--1310
- artykuł: Influence of Material Coating on the Heat Transfer in a Layered Cu-SiC-Cu Systems (Strojny-Nędza A., Pietrzak K., Teodorczyk M., Basista M., Węglewski W., Chmielewski M.), s. 1311--1314
- artykuł: Investigations of Interface Properties in Copper-Silicon Carbide Composites (Chmielewski M., Pietrzak K., Strojny-Nędza A., Jarząbek D., Nosewicz S.), s. 1315--1318
- artykuł: A Study on Changes in Thickness of STS304 Material in the Progressive Drawing Process (Lee C. K., Kim Y. C.), s. 1319--1323
- artykuł: Improvement of Microwave Absorbance of Polymer Composites of W-Type Hexaferrite Powders by Attachment of Frequency Selective Surface (Cho H.-S., Kim S.-S.), s. 1325--1328
- artykuł: Effect of Strut Thickness on Room and High Temperature Compressive Properties of Block-Type Ni-Cr-Al Powder Porous Metals (Kang B.-H., Park M.-H., Lee K.-A.), s. 1329--1334
- artykuł: Effect of Heat Treatment on the Microstructure and Tensile Deformation Behavior of Oxide Dispersion Strengthened Alloys Manufactured by Complex Milling Process (Kim Y.-K., Kim J.-H., Gwon J.-H., Lee K.-A.), s. 1335--1340
- artykuł: Effect of Heat Treatment on Microstructure and Impact Toughness of Ti-6Al-4V Manufactured by Selective Laser Melting Process (Lee K.-A., Kim Y.-K., Yu J.-H., Park S.-H., Kim M.-C.), s. 1341--1346
- artykuł: High Temperature Oxidation Property of SiC Coating Layer Fabricated by Aerosol Deposition Process (Ham G.-S., Kim S.-H., Park J.-Y., Lee K.-A.), s. 1347--1351
- artykuł: Torsion Property of the Structure Bonded Aluminum Foam Due to Impact (Hwang G. W., Cho J. U.), s. 1353--1357
- artykuł: A Fatigue Fracture Study on TDCB Aluminum Foam Specimen of Type Mode III Bonded with Adhesive (Lee J. H., Cho J. U.), s. 1359--1362
- artykuł: A Study on Propagation Property of Fatigue Crack at Composite with Another Material (Choi K. K., Cho J. U.), s. 1363--1366
- artykuł: Fabrication and Shape Memory Characteristics of Highly Porous Ti-Nb-Mo Biomaterials (Kim Y.-W., Mukarati T. W.), s. 1367--1370
- artykuł: Collection of Industrial Oil Using Nanoparticles and Porous Powders of Silica (Cho Y.-S., Moon J.-W.), s. 1371--1375
- artykuł: Understanding the Oxide Dispersion Behavior of Yttria in Metal Matrix of MA956 Alloy through High-Energy Milling and Hot Press Sintering (Swain B., Han D., Kim G.-H., Kong M.-S., Ahn B.), s. 1377--1381
- artykuł: Oxidation Behavior of Steel with Cr Content and Water Flow Rate (Kim D.-J., Kim K. M., Shin J. H., Cheong Y. M., Lee E. H., Lee G. G., Kim S. W., Kim H. P., Choi M. J., Lim Y. S., Hwang S. S.), s. 1383--1387
- artykuł: Rapid Synthesis of Gold Nano-Particles Using Pulse Waved Potential in a Non-Aqueous Electrolyte (Jang J. G., Lee J.-O., Lee C. K.), s. 1389--1392
- artykuł: Effect of Mechanical Activation on the in situ Formation of TiB2 Particulates in the Powder Mixture of TiH2 and FeB (Huynh X.-K., Kim B.-W., Kim J. S.), s. 1393--1398
- artykuł: Control of Natural Zeolite Properties by Mechanical Activation in Stirred Media Mill (Bohács K., Faitli J., Bokányi L., Mucsi G.), s. 1399--1406
- artykuł: Fabrication of Cu-Based SiC Composites by Spark Plasma Sintering of Cu-Nitrate Coated SiC Powders (Jeong Y.-K., Kim Y. S., Oh S.-T.), s. 1407--1410
- artykuł: Synthesis of Single Crystalline Titanium Oxide and Sodium Titanate Nanorods via Salt-Assisted Ultrasonic Spray Pyrolysis (Hwangbo Y., Yoo J.-H., Lee Y.-I.), s. 1411--1414
- artykuł: Effects of Grain Boundary Morphologies on Stress Corrosion Cracking of Alloy 600 (Kim H. P., Choi M. J., Kim S. W., Kim D. J., Lim Y. S., Hwang S. S.), s. 1415--1419

rozwiń roczniki

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.