Production of heterogeneous surfaces by ESD and LBM

• Autorzy: Radek N. , Pliszka I. , Antoszewski B. , Świderski B. , Pietraszek J.
• Języki publikacji: EN

Abstrakty

EN

The paper is concerned with testing Cu-Mo coatings deposited over carbon steel C45 which were then eroded with a laser beam. The properties were assessed by analyzing the effects of laser eroded, texturing methodology and wear tests. The tests were conducted for Mo and Cu coatings (the anode) which were electro-spark deposited over the C45 steel substrate (the cathode) and melted with a laser beam. The coatings were deposited by means of an ELFA-541. The laser processing was performed with an Nd:YAG laser. The coatings after laser processing are still distinguished by very good performance properties which make them suitable for use in sliding friction pairs.

Słowa kluczowe

EN

heterogeneous surfaces; electro-spark deposition; ESD; laser beam machining; LBM; texturing; properties

PL

powierzchnia heterogeniczna; obróbka wiązką laserową; teksturowanie

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2016
• Tom: Vol. 13, No. 4
• Strony: 44--48
• Opis fizyczny: Bibliogr. 11.poz. rys., tab.

Twórcy

autor

Radek N.

• University of Technology in Kielce, Al. 1000-lecia Państwa Polskiego 7, 25-314 Kielce, Poland

autor

Pliszka I.

• University of Technology in Kielce, Al. 1000-lecia Państwa Polskiego 7, 25-314 Kielce, Poland

autor

Antoszewski B.

• University of Technology in Kielce, Al. 1000-lecia Państwa Polskiego 7, 25-314 Kielce, Poland

autor

Świderski B.

• University of Technology in Kielce, Al. 1000-lecia Państwa Polskiego 7, 25-314 Kielce, Poland

autor

Pietraszek J.

• University of Technology in Cracow, Al. Jana Pawła II, 37, 31-864 Kraków, Poland

Bibliografia

• 1. ANTOSZEWSKI B. 1999. Influence of laser and plasma modification on surface properties of sliding and rubbing components. Wydawnictwo Politechniki Świętokrzyskiej, Kielce.
• 2. GYK G., ETSION I. 2006. Testing piston rings with partial laser surface texturing for friction reduction. Vol. 216 Wear.
• 3. WAN YI, XIONG DANG-SHENG 2008. The effect of laser surface texturing on frictional performance of face seal. Vol. 197 Journal of Materials Processing Technology.
• 4. ANTOSZEWSKI B. 2010. The surface layers of texture - the formation of selected technologies bundled and tribological properties. Wydawnictwo Politechniki Świętokrzyskiej, Kielce.
• 5. ANTOSZEWSKI B. 2010. Problems of maintenance of sustainable technological systems. [In:] Improvement of the conditions of lubrication friction ties by laser textured lubrication, Wydawnictwo PNTTE 2010, Tom 1.
• 6. ANTOSZEWSKI B. 2009. The formation of antiwear surface layers on elements of machine parts. Vol. 44 No. 2, Zagadnienia Eksploatacji Maszyn.
• 7. ARNOLD J., MULLER G., SCHNEIDER H., MULLER H. K., HUGEL H. 1993. Production of micro structures in SiC slide rings with an excimer laser. Vol. 25 Laser und Optoelektronik.
• 8. ETSION I. 2003. A laser surface textured hydrostatic mechanical seal sealing technology Vol. 3 Sealing Technology.
• 9. YU X. Q., HE S. 2002. Frictional characteristics of mechanical seals with a laser textured seal face. Vol. 129 Journal of Materials Processing Technology.
• 10. KOVALCHENKO A., AJAYI A., ERDEMIR A., FENSKE G., ETISON I. 2005. The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact. Vol. 38 Tribology International.
• 11. PIETRASZEK J., RADEK N., BARTKOWIAK K. 2013. Advanced statistical refinement of surface layer's discretization in the case of electro-spark deposited carbide-ceramic coatings modified by a laser beam. Vol. 197 Solid State Phenomena.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.