Development of construction of a catalytic reactor for methane oxidising in ventilation air in coal mines and the research on integrated “heat pipe” recuperator

• Autorzy: Hys L.

Identyfikatory

DOI

10.5604/2081139X.1043170

• Języki publikacji: EN

Abstrakty

EN

The article presents the analysis whose result is the selection of appropriate design and construction of a monolithic CMR reactor intended for oxidising methane from ventilation air in coal mines. The description of “heat-pipe” recuperator cooperating with the reactor was also presented. The research was mainly aimed at verifying the compliance with the work of autothermity premise obtained by the return of part of heat from catalytic reaction. The result of research was to define the range volumetric fume expense ensuring autothermity and the definition of maximum recuperator efficiency. The range of volumetric expense was 18–25 m³/h and maximum value of efficiency coefficient was η = 0.50 for the volumetric expense of 18 m³/h.

Słowa kluczowe

EN

heat pipe; recuperator; catalytic reactor

• Wydawca: Polskie Towarzystwo Inżynierii Ekologicznej ; Lublin University of Technology
• Czasopismo: Journal of Ecological Engineering
• Rocznik: 2013
• Tom: Vol. 14, nr 2
• Strony: 31--35
• Opis fizyczny: Bibliogr. 7 poz., rys.

Twórcy

autor

Hys L.

• Institute of Transportation, Combustion Engines and Ecology, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland

Bibliografia

• 1. Gosiewski K. 2005. Efficiency of heat recovery versus maximum catalyst temperature in a reverseflow combustion of methane. Chemical Engineering Journal, 107: 19–25.
• 2. Kolios G., Frauhammer J., Eigenberger G. 2000. Autothermal fixed-bed reactor concepts. Chemical Engineering Science, 55: 5945-5967.
• 3. Konev S.V., Tsinlian V. 1994. Thermal efficienty of manifold-heat-pipe heat exchangers. Journal of Engineering Physics and Thermophysics, 66(2).
• 4. Nawrat S., Napieraj S. 2012. Utylizacja metanu w Kopalni JAS-MOS – badania. Energetyka i Przemysł, 3.
• 5. Nazimek D., Hys L., Bochniarz S. 2009. Założenia do budowy reaktora RKUM-1 dla instalacji IUMK- 1/0 i IUMK-1/1 w skali wielkolaboratoryjnej oraz reaktora RKUM-100 dla instalacji IUMK-2/0 i IUMK-2/100 w skali półtechnicznej. Lublin.
• 6. Noie-Baghban S.H., Majideian G.R. 2000. Waste heat recovery using heat pipe heat exchanger (HPHE) for surgery rooms in hospitals. Applied Thermal Engineering, 20: 1271-1282.
• 7. Su S., Agnew J. 2006. Catalytic combustion of coal mine ventilation air methane. Fuel, 85: 1201–1210.