Influence of Selected Parameters on Reduction of Converter Slag - Studies with CFD Method

• Autorzy: Kolczyk E. , Miczkowski Z. , Czernecki J.

Identyfikatory

DOI

10.1515/amm-2016-0345

• Języki publikacji: EN

Abstrakty

EN

In this study influence of selected parameters on the process of reduction of converter slag from refining of Cu-Pb-Fe alloy was numerically examined. The process of the slag reduction is carried out in Q 80 converters of Hoboken type for copper removal. Converter slags show high concentration of lead therefore they can be seen as an important component for further processing in rotary-rocking furnaces together with other lead-bearing materials. Three-dimensional simulation was performed using the IPSA (Inter Phase Slip Algorithm) module of two-phase flow from PHOENICS package. Numerical simulations have forecasted influence of changes in the slag chemical composition and the process time on the process course.

Słowa kluczowe

EN

numerical modelling; reduction process; converter slag; Cu-Pb-Fe alloys

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 4
• Strony: 2165--2170
• Opis fizyczny: Bibliogr. 13 poz., rys., tab., wykr., wzory

Twórcy

autor

Kolczyk E.

• Institute of Non Ferrous Metals, 5 Sowińskiego Str., 44-100 Gliwice, Poland

autor

Miczkowski Z.

• Institute of Non Ferrous Metals, 5 Sowińskiego Str., 44-100 Gliwice, Poland

autor

Czernecki J.

• Institute of Non Ferrous Metals, 5 Sowińskiego Str., 44-100 Gliwice, Poland

Bibliografia

• [1] J. Czernecki, Z. Śmieszek, Z. Miczkowski, Erzmetall 65, 2 (2012).
• [2] A. Valencia, R. Paredes, M. Rosales, E. Gdoy, J. Ortega, Int. Comm. On Heat Mass Transfer 31, 1 (2004).
• [3] A. Valencia, M. Rosales, R. Paredes, C. Loen, A. Moyano, Int. Comm. On Heat Mass Transfer 33, 3 (2006).
• [4] A. Almaraz, C. Lopez, M. Meaza, G. Plascencia, Journal of Material Science and Engineering A 3, 7 (2013).
• [5] Ch. Zschiesche, J. Schmidl, Non-Ferrous Metals for the Sustainable development in our World, Clausthal-Zellerfeld (2013).
• [6] Z. Cui, D. Shen, X. Wen, R. Bian, Non-Ferrous Metals for the Sustainable development in our World, Clausthal-Zellerfeld (2013).
• [7] W. Ptak, J. Czernecki, Archiwum hutnicze (1981).
• [8] T. Pomianek at.al, Fracture 3, IMN Gliwice (1978).
• [9] J. Esdaile, J. Mcadams, Proc. Austral. Inst. Min. Met. 239, 71 (1971).
• [10] http://www.cham.co.uk/products/industryspecific.php
• [11] M. Dziubiński, J. Prywer, Mechanika płynów dwufazowych, Warszawa 2009.
• [12] G. Li, S. Frankel, J. Braun, E. Groll, HVAC&R Research 11, 1 (2005).
• [13] http://www.cham.co.uk/phoeniccs/dpolis/d../enc/ipsa.htm