The Influence of Mo Content on Phase Transformation in Ti-Mo Alloys

• Autorzy: Sochacka P. , Miklaszewski A. , Jurczyk M.

Identyfikatory

DOI

10.1515/amm-2017-0304

• Języki publikacji: EN

Abstrakty

EN

Titanium β-type alloys are a class of interesting biomaterials that can exhibit a unique combination of mechanical as well as physicochemical and biological properties. The aim of this study is to develop a titanium-molybdenum alloys (Ti-x at % Mo, x = 15 and 23). These materials were prepared by the combination of mechanical alloying and powder metallurgical process. The details of the processing method were presented. The samples were characterized by X-ray diffraction, scanning electron micros-copy, chemical composition determination as well as density and Vickers microhardness measurements. The corrosion behaviour in Ringer solution was investigated, too. The crystallization of the obtained material upon annealing led to the formation of a near single β type alloys. The molybdenum content in titanium and heat treatment parameters of a nearly amorphous phase allow to synthesize Ti(β)-type alloys. The present study has demonstrated that Ti23Mo alloy can be the next generation of biomaterial for bone tissue engineering.

Słowa kluczowe

EN

titanium; molybdenum; biomaterials; mechanical alloying; phase transitions α-β

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 4
• Strony: 2051--2056
• Opis fizyczny: Bibliogr. 19 poz., rys., tab., wykr.

Twórcy

autor

Sochacka P.

• Poznan University of Technology, Institute of Materials Science and Engineering, 5 Marii Skłodowskiej-Curie Sq., 60-965, Poznan, Poland

autor

Miklaszewski A.

• Poznan University of Technology, Institute of Materials Science and Engineering, 5 Marii Skłodowskiej-Curie Sq., 60-965, Poznan, Poland

autor

Jurczyk M.

• Poznan University of Technology, Institute of Materials Science and Engineering, 5 Marii Skłodowskiej-Curie Sq., 60-965, Poznan, Poland

Bibliografia

• [1] H. J. Rack, J. J. Qazi, Mater. Sci. Eng. C26, 1269 (2006).
• [2] M. Geetha, A. K. Singh, R. Asokamani, A. K. Gogia, Progr. Mat. Sci. 54, 397 (2009).
• [3] Y. Estrin, C. Kasper, S. Diederichs, R. Lapovok, J. Biomed. Mater. Res. A 90, 1239 (2009).
• [4] C. Suryanarayna, Prog. Mater. Sci. 46, 1 (2001).
• [5] T. J. Webster, J. U. Ejiofor, Biomaterials 25, 4731 (2004).
• [6] M. Kaczmarek, M. U. Jurczyk, B. Rubis, A. Banaszak, A. Kolecka, A. Paszel, K. Jurczyk, M. Murias, J. Sikora, M. Jurczyk, J. Biomed. Mater. Res. 102A, 1316 (2014).
• [7] R. Z. Valiev, I. P. Semenova, V. V. Latysh, H. Rack, T. C. Lowe, J. Petruzelka, L. Dluhos, D. Hrusak, J. Sochova, Adv. Eng. Mater. 10, 1 (2008).
• [8] R. Bawa, G. F. Audette, I. Rubinstein (Ed.), Handbook of Clinical Nanomedicine: Nanoparticles, Imaging, Therapy, and Clinical Applications, Pan Stanford Publishing Pte. Ltd., ISBN 978-981-4669-20-7 (2015).
• [9] D. Kuroda, M. Niinomi, M. Morinaga, Y. Kato, T. Yashiro, Mater. Sci. Eng. A 243, 244 (1998).
• [10] A. T. Sidambe, Materials 7, 8168 (2014).
• [11] E. Kobayashi, H. Doi, M. Takahashi, T. Nakano, T. Yoneyama, H. Hamanaka, J. Jpn. Soc. Dent. Mater. Dev. 14, 406 (1995).
• [12] E. Kobayashi, H. Doi, T. Yoneyama, H. Hamanaka, S. Matsumoto, K. Kudaka, J. Jpn. Soc. Dent. Mater. Dev. 14, 321 (1995).
• [13] M. Niinomi, Sci. Techn. Adv. Mater. 4, 445 (2003).
• [14] J. J. Benjamin, Sci. Am. 234, 40 (1976).
• [15] P. I. Brånemark, The Journal of Prosthetic Dentistry 50, 399 (1983).
• [16] B. C. Ward, T. J. Webster, Mater. Sci. Eng. C 27, 575 (2007).
• [17] K. Jurczyk, A. Miklaszewski, M. U. Jurczyk, M. Jurczyk, Materials 8, 8032 (2015).
• [18] L. Mishnaevsky Jr., R. Levashov, R. Z. Valiev, J. Segurado, I. Sabirov, N. Enikeev, S. Prokoshkin, A. V. Solov’yov, A. Korotitskiy, E. Gutmanas, I. Gotman, E. Rabkin, S. Psakh’e, L. Dluhoš, M. Seefeldt, A. Smolin, Mater.Sci. Eng. R: Reports 81, 1 (2014).
• [19] R. Z. Valiev, M. J. Zehetbauer, Y. Estrin, H. W. Höppel, Y. Ivanisenko, H. Hahn, G. Wilde, H. J. Roven, X. Sauvage, T. G. Langdon, Adv. Eng. Mater. 9, 527 (2007).

Uwagi

EN

The work has been financed by Polish Ministry of Science and Higher Education within statutory activity

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).