The Influence of Process Parameters on the Mechanical Behavior of a Composite Material Made from Mixed Plastic Wastes

• Autorzy: Platon Mihai Andrei , Nemeș Ovidiu , Tiuc Ancuta Elena , Vilău Cristian , Dudescu Mircea Cristian , Pădurețu Sanda

Identyfikatory

DOI

10.24425/amm.2022.141047

• Języki publikacji: EN

Abstrakty

EN

Accordingly with the principles of the circular economy, mixed plastic wastes can be recycled also by thermoforming, getting new non-oriented fibers composite materials. This study highlights the mechanical behavior of new composite material plates containing recycled glass fibers as reinforcing element and ABS-PMMA mixture as matrix, as well as an efficient way to convert a manufacturing process wastes in a product. The mechanical behavior of new composite material plates was evidenced by tensile, flexural and compression tests. In addition a surface morphology analysis was performed.

Słowa kluczowe

EN

mixed waste; waste recycling; sustainability

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 4
• Strony: 1235--1241
• Opis fizyczny: Bibliogr. 48 poz., fot., rys., tab., wykr., wzory

Twórcy

autor

Platon Mihai Andrei

• Technical University of Cluj-Napoca, Faculty of Materials and Environmental Engineering, 28 Memorandumului Street, 400114, Cluj-Napoca, Romania

• https://orcid.org/0000-0001-9968-1499

autor

Nemeș Ovidiu

• Technical University of Cluj-Napoca, Faculty of Materials and Environmental Engineering, 28 Memorandumului Street, 400114, Cluj-Napoca, Romania
• National Institute for Research and Development in Environmental Protection, 294 Blvd. Splaiul Independentei, Sector 6, 060031, Bucharest, Romania

• https://orcid.org/0000-0001-7332-9331

autor

Tiuc Ancuta Elena

• Technical University of Cluj-Napoca, Faculty of Materials and Environmental Engineering, 28 Memorandumului Street, 400114, Cluj-Napoca, Romania

• https://orcid.org/0000-0001-6227-1824

autor

Vilău Cristian

• Technical University of Cluj-Napoca, Faculty of Automotive, Mechatronics and Mechanical Engineering, 28 Memorandumului Street, 400114, Cluj-Napoca, Romania

• https://orcid.org/0000-0001-5622-0393

autor

Dudescu Mircea Cristian

• Technical University of Cluj-Napoca, Faculty of Automotive, Mechatronics and Mechanical Engineering, 28 Memorandumului Street, 400114, Cluj-Napoca, Romania

• https://orcid.org/0000-0001-7743-4542

autor

Pădurețu Sanda

• Technical University of Cluj-Napoca, Faculty of Machine Building, 28 Memorandumului Street, 400114, Cluj-Napoca, Romania

• https://orcid.org/0000-0001-9707-8135

Bibliografia

• [1] Y.C. Feng, F. Zhao, H. Xu, MATEC Web of Conferences (2016).
• [2] V. Vladimirov, I. Bica, International symposium “The environment and the industry” (2017).
• [3] S.N. Kasa, M.F. Omar, M.M.A. Abdullah, I.N. Ismail, S.S. Ting, S.C. Vac, P. Vizureanu, Mater. Plast. 54, 91-97 (2017).
• [4] H. Jaya, M.F. Omar, H.M. Akil, Z.A. Ahmad, N.N. Zulkepli, M.M.A. Abdullah, I.G. Sandu, P. Vizureanu, Mater. Plast. 53, 85-90 (2016).
• [5] A.M. Izzat, A.M.M. Al Bakri, H. Kamarudin, L.M. Moga, G.C.M. Ruzaidi, M.T.M. Faheem, A.V. Sandu, Mater. Plast. 50, 171-174 (2013).
• [6] M.A. Faris, M.M.A. Abdullah, A.V. Sandu, K.N. Ismail, L.M. Moga, O. Neculai, R. Muniandy, Mater. Plast. 54, 145-154 (2017).
• [7] W.M.W. Ibrahim, M.M.A. Abdullah, A.V. Sandu, K. Hussin, I.G. Sandu, K.N. Ismail, A.A. Radir, M. Binhussain, Rev. Chim. 65, 1340-1345 (2014).
• [8] G.E. Popita, C. Rosu, D. Manciula, O. Corbu, A. Popovici, O. Nemes, A.V. Sandu, M. Proorocu, S.B. Dan, Mater. Plast. 53, 308-311 (2016).
• [9] J.R. Correia, N.M. Almeida, J. R. Figueira, J. of Cle. Prod. 19, 1745-1753 (2011).
• [10] F. Tittarelli, S.P. Shah, Constr. and Build. Mater. 47, 1532-1538 (2013).
• [11] F. Tittarelli, Constr. and Build. Mater. 47, 1539-1543 (2013).
• [12] P. Asokan, M. Osmani, A.D.F. Price, J. of Cle. Prod. 17, 821-829 (2009).
• [13] A. Yazdanbakhsh, L.C. Bank, Y. Tian, Recycling 3 (1), 8 (2018).
• [14] S. Feih, E. Boiocchi, G. Mathys, Z. Mathys, A.G. Gibson, A.P. Mouritz, Compos.: Part B. 42, 350-358 (2011).
• [15] S. Job, G. Leeke, P. Tarisai Mativenga, P. Pickering, N.A. Shuaib, Composites recycling: Where are we now?, Composites UK (2016).
• [16] M.C. Santos Ribeiro, A. Fiuza, A. Ferreira, M. Lurdes Dinis, A.C.M. Castro, J.P. Meixedo, M.R. Alvim, Recycling 1, 178-193 (2016).
• [17] J.P. Jensen, K. Skelton, Renew. and Sust. Ene. Rev. 97, 165-176 (2018).
• [18] S. Job, Composite materials and end of life, Knowledge Transfer Network (2014).
• [19] E. Guttierez, F. Bono, Review of industrial manufacturing capacity for fiber-reinforced polymers as prospective structural components in shipping containers, Publications Office of the European Union (2013).
• [20] Y. Aono, S. Murae, T. Kuboa, Pro. Eng. 10, 2080-2085 (2011).
• [21] X.F. Nie, B. Fu, J.G. Teng, L.C. Bank, Y. Tian, Adv. in Eng. Mat., Str. and Sys.: Inno., Mec. and App. (2009).
• [22] A strategy for competitive, sustainable, and secure energy, Publications Office of the European Union (2010).
• [23] Directive 2000/53/EC of the European parliament and of the council on end-of life vehicles, Official Journal of the European Union (2000).
• [24] J. Palmer, O.R. Ghita, L. Savage, K.E. Evans, Comp.: Part A 40, 490-498 (2009).
• [25] O. Hollins, P. Lee, E. Sims, O. Bertham, H. Symington, N. Bell, L. Pfaltzgraff, P. Sjögren. Towards a circular economy - Waste management in the EU, Science and Technology Options Assessment (2017).
• [26] K. Hamad, M. Kassem, F. Deri, Pol. Deg. and Sta. 98, 2801-2812 (2013).
• [27] A.E. Tiuc, O. Vasile, H. Vermesan, M.A. Platon, Mat. Plas. 55, 419-422 (2018).
• [28] M.A. Platon, M. Stef, A. Popa, A.E Tiuc, O. Nemes, IOP Conference Series: Materials Science and Engineering (2018).
• [29] A.E. Tiuc, O. Nemes, H. Vermesan, A.C. Toma, Comp. Part B 165, 120-130 (2019).
• [30] A. Borlea (Tiuc), T. Rusu, S. Ionescu, O. Nemes, Rom. Jou. of Mat. 42, 405-414 (2012).
• [31] S. I. Borlea (Muresan), A.E. Tiuc, O. Nemes, H. Vermesan, O. Vasile. Materials 13, 694 (2020).
• [32] A.M. Gombos, O. Nemes, V.F. Soporan, A. Vescan, Stud. Babes-Bol. Che. 81, LIII (2008).
• [33] M.A. Platon, O. Nemes, A.E. Tiuc, O. Vasile, S. Paduretu, Phono absorbent behavior of new fiberglass plates from mixed plastic material wastes, in Lucas F. M. da Silva (Ed.), Materials Design and Applications III, Springer (2020).
• [34] ASTM D7264/D7264M-15, Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials, ASTM International, West Conshohocken, PA, 2015, www.astm.org.
• [35] ASTM D3039/D3039M-17, Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM International, West Conshohocken, PA, 2017, www.astm.org.
• [36] ASTM D3410/D3410M-16, Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading, ASTM International, West Conshohocken, PA, 2016, www.astm.org.
• [37] A. Casale, O. Salvatore, G. Pizzigoni, Pol. Eng. and Sci. 15, 286-293 (1975).
• [38] E. Scalco, T.W. Huseby, J.R. Blyler, Jou. of App. Pol. Sci. 12, 1343-1353 (1968).
• [39] B.E. Tiganis, L.S. Burn, P. Davis, A. J. Hill, Pol. Deg. and Stab. 76, 425-434 (2002).
• [40] M. Dawoud, I. Taha, S.J. Ebeid, Jou. of Manuf. Proc. 21, 39-45 (2016).
• [41] C.R. Bernal, P.M. Frontini, R. Herrera. Pol. Test. 11, 271-288 (1992).
• [42] M. Rahman, N.R. Schott, L.K. Sadhu, Proceedings of the COMSOL Conference (2016).
• [43] R.W. Truss, G.A. Chadwick, Jou. of Mat. Sci. 11, 111-117 (1976).
• [44] D. Garcia-Gonzales, A. Rusinek, A. Bendarma, R. Bernier, S. Klosak, S. Bahi, Pol. Test 81, 106263 (2020).
• [45] S. Zangana, J. Epaarachchi, W. Ferdous, J.S. Leng, Int. J. Impact Eng. 137, 103430, (2020).
• [46] W. Ferdous, T.D. Ngo, K.T.Q. Nguyen, A. Ghazlan, P. Mendis, A. Manalo, Comp. Part B 155, 414-424 (2018).
• [47] M. Nasraoui, P. Forquin, L. Siad, A. Rusinek, E. Dossou, Dym. Int. Conf. 2, 1103-1108, (2009).
• [48] K. Lengyel, PhD thesis, Contributions to the manufacturing technology of wooden particleboards (PB) with a view to improving some of their properties, Transilvania University, Brasov, (2019).

Uwagi

1. The authors thank the following projects: “Entrepreneurial skills and research excellence in doctoral and postdoctoral study programs” - ANTREDOC (POCU/380/6/13/123927 CODE SMIS 123927); ExNanoMat- “Supporting excellence in research in the field of nanotechnologies and advanced materials” and the Research Contract no. 19249/05.08.2020 “Ecological method for recyclable wastes valorization” - ECOWASTE.

2. Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).