An Universal USB 3.0 FIFO Interface For Data Acquisition

• Autorzy: Mroczek K.
• Języki publikacji: EN

Abstrakty

EN

In this paper, an USB – DAQ interface unit that allows connecting data acquisition (DAQ) application to USB is presented. The unit contains two main components: USB to FIFO IC controller and application controller, designed as VHDL core for FPGA. DAQ logic can be connected to USB through simple I/O and streaming interfaces, thus development time of user application can be reduced. The design was tested with high-speed and SuperSpeed FTDI and Cypress USB – FIFO controllers.

Słowa kluczowe

EN

data acquisition; USB 3.0; SuperSpeed; FPGA; hardware interface

• Wydawca: Wydawnictwo PAK
• Czasopismo: Measurement Automation Monitoring
• Rocznik: 2016
• Tom: Vol. 62, No. 12
• Strony: 434--438
• Opis fizyczny: Bibliogr. 13 poz., rys., schem., tab.

Twórcy

autor

Mroczek K.

• Institute of Radioelectronics and Multimedia Technology, Warsaw University of Technology Warsaw, Nowowiejska 15/19, 00-665 Poland

Bibliografia

• [1] FT2232H Dual High Speed USB To Multip. UART/FIFO IC, FTDI
• [2] FT600Q-FT601Q IC Datasheet (USB 3.0 to FIFO Bridge), FTDI
• [3] FT600_FT601 USB Bridge chips Integration, app. note an_412, FTDI
• [4] EZ-USB® Technical Reference Manual, Cypress Semiconductor
• [5] EZ-USB® FX3 Technical Reference Manual, Cypress Semiconductor
• [6] Gandhi S., Designing with the EZ-USB® FX3™ Slave FIFO Interface, AN65974, Cypress Semiconductor
• [7] Slfifosync firmware example, Cypress EZ-USB® FX3™ SDK
• [8] Zabołotny W.M., Kasprowicz G., Low cost USB – local bus interface for FPGA based systems, Proceedings of SPIE Vol. 8454, 2012
• [9] Jolfaei F. A., Mohammadizadeh N., Sadri M.S., FaniSani F., High Speed USB 2.0 Interface for FPGA Based Embedded Systems, 4th International Conference on Embedded and Multimedia Computing EM-com, 2009
• [10] Mroczek K., USB FIFO interface for FPGA based DAQ applications, 8th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems IDAACS'2015, 24-26 September 2015
• [11] Shah K., How to Implement an Image Sensor Interface Using EZ-USB® FX3™ in a USB Video Class (UVC) Framework, AN75779, Cypress Semiconductor
• [12] Janßen B., Hübner M., Jaeschke T., An AXI Compatible Cypress EZ-USB FX3 Interface for USB-3.0 SuperSpeed, 2014 International Conference on ReConFigurable Computing and FPGAs (ReConFig)
• [13] Abba A., Caponio F., Cusimano A., Geraci A., Implementation of USB 3.0 Bus Controller in FPGA for Data Transfer in Multi-Channel Application, 2013 IEEE Nuclear Science Symposium and Medical Imaging Conference (2013 NSS/MIC)

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).