The use of surface acoustic waves to evaluate of the near-surface layers of metal processed shot peening

• Autorzy: Skalskyi Valentyn , Student Mykhaylo , Mokryy Oleh , Dudda Waldemar , Kharchenko Yevhen , Chumalo Halyna , Hvozdetskyi Volodymyr

Identyfikatory

DOI

10.29354/diag/141232

• Języki publikacji: EN

Abstrakty

EN

The surface layers of low-carbon steel metal subjected to shot peening were studied. The velocity of Rayleigh surface waves of various frequencies in the range of 3-9 MHz by the phase-pulse method using contact piezoelectric transducers measured. The study of the distribution of residual mechanical stresses in depth was carried out using the etching of the surface layer of the metal and the use of a strain gauges. The characteristics of the roughness of the surface layer of the metal, which has arisen as a result of shot peening, have been determined. The effect of roughness and plastically deformed layer on the velocity of surface acoustic waves (SAW) is estimated by the method of layer-by-layer grinding of the surface layers of the metal. Based on the determination of the magnitude of the residual mechanical stresses and the known acoustoelastic coefficients, the magnitude of the change in the velocity of SAW under the action of these stresses is estimated.

Słowa kluczowe

EN

shot peening; Rayleigh surface wave velocity; residual mechanical stresses; roughness

PL

chropowatość; prędkość fali; fala powierzchniowa Rayleigha; naprężenia własne

• Wydawca: Polskie Towarzystwo Diagnostyki Technicznej
• Czasopismo: Diagnostyka
• Rocznik: 2021
• Tom: Vol. 22, No. 3
• Strony: 51--57
• Opis fizyczny: Bibliogr. 23 poz., rys.

Twórcy

autor

Skalskyi Valentyn

• Karpenko Physico-Mechanical Institute of NAS of Ukraine, Lviv, Ukraine

autor

Student Mykhaylo

• Karpenko Physico-Mechanical Institute of NAS of Ukraine, Lviv, Ukraine

autor

Mokryy Oleh

• Karpenko Physico-Mechanical Institute of NAS of Ukraine, Lviv, Ukraine

autor

Dudda Waldemar

• University of Warmia and Mazury in Olsztyn, Poland

autor

Kharchenko Yevhen

• University of Warmia and Mazury in Olsztyn, Poland
• Lviv Polytechnic National University, Lviv, Ukraine

autor

Chumalo Halyna

• Karpenko Physico-Mechanical Institute of NAS of Ukraine, Lviv, Ukraine

autor

Hvozdetskyi Volodymyr

• Karpenko Physico-Mechanical Institute of NAS of Ukraine, Lviv, Ukraine

Bibliografia

• 1. Berezhnyts'ka MP, Kyrylenko SM, Paustovskii AV. Evaluation of residual stresses in bars subjected to surface hardening. Material Science. 1997;33(6): 851-861. https://doi.org/10.1007/BF02355568.
• 2. Biswas S, Abo-Dahab SM. Effect of phase-lags on Rayleigh wave propagation in initially stressed magneto-thermoelastic orthotropic medium. Applied Mathematical Modelling. 2018; 59: 713-727. https://doi.org/10.1016/j.apm.2018.02.025.
• 3. Chen M, Liu H, Wang L, Wang C, Zhu K, Xu Z, Ji, V. Evaluation of the residual stress and microstructure character in SAF 2507 duplex stainless steel after multiple shot peening process. Surface and Coatings Technology. 2018; 344: 132-140. https://doi.org/10.1016/j.surfcoat.2018.03.012.
• 4. Chumalo HV, Posuvailo VM, Kharchenko EV, Palyukh VM. Influence of the Composition of Electrolytes on the Properties of Plasma-Electrolytic Oxide Coatings on Light Alloys / Materials Science. 2020; 56. 2: 27-33. https://doi.org/10.1007/s11003-020-00393-2.
• 5. Cizek J, Dlouhy I, Siska F, Khor KA. Modification of Plasma-sprayed TiO2 coatings characteristics via controllingthe in-flight temperature and velocity of the powder particles. Journal of Thermal Spray Technology. 2014;23(8):1339-1349. https://doi.org/10.1007/s11666-014-0132-z.
• 6. Gartsev S. Köhler B. Direct measurements of Rayleigh wave acoustoelastic constants for shot-peened superalloy. NDT & E International. 2020; 113: 1-7. https://doi.org/10.1016/j.ndteint.2020.102279.
• 7. Hughes JM, Vidler J, Ng CT, Khanna A, Mohabuth M, Rose LF, Kotousov A. Comparative evaluation of in situ stress monitoring with Rayleigh waves. Structural Health Monitoring. 2019; 18(1): 205- 215.https://doi.org/10.1177/1475921718798146.
• 8. Hutsaylyuk V, Student M, Dovhunyk V, Posuvailo V, Student OP, Maruschak P, Koval’chuck I. Effect of hydrogen on the wear resistance of steels upon contact with plasma electrolytic oxidation layers synthesized on aluminum alloys. Metals. 2019; 9;(3): 2-14. https://doi.org/10.3390/met9030280.
• 9. Hutsaylyuk V, Student M, Posuvailo V, Student O, Sirak Ya, Hvozdets'kyi V, Maruschak P, Veselivska H. The properties of oxide-ceramic layers with Cu and Ni inclusions synthesizing by PEO method on top of the gas-spraying coatings on aluminium alloys. Vacuum. 2020;179:109514. https://doi.org/10.1016/j.vacuum.2020.109514.
• 10. Johnson C, Thompson RB. The spatial resolution of Raileigh wave, acoustoelastic measurement of stress Review of Progress in Quantutative Nondestraction Evalution, Edited by DO. Thompson and DE. Chimenti Plenum Press, New York. 1993;12:2121-2128. https://doi.org/10.1007/978-1-4615-2848-7_272.
• 11. Koshovyi VV, Mokryi ОM, Hredil’ МІ, Romanyshyn ІМ. Investigation of the Space Distribution of the Velocity of Surface Acoustic Waves in Plastically Deformed Steel by the Laser Method. Materials Science. 2014;49(4):478-484. https://doi.org/10.1007/s11003-014-9639-1.
• 12. Kovacı H, Bozkurt YB, Yetim AF, Aslan M, Çelik A. The effect of surface plastic deformation produced by shot peening on corrosion behavior of a low-alloy steel. Surface and Coatings Technology. 2019; 360: 78-86. https://doi.org/10.1016/j.surfcoat.2019.01.003.
• 13. Kundu S, Maity M, Pandit DK, Gupta S. Effect of initial stress on the propagation and attenuation characteristics of Rayleigh waves. Acta Mechanica. 2019; 230(1): 67-85. https://doi.org/10.1007/s00707-018-2283-3.
• 14. Lévesque D, Lim CS, Padioleau C, Blouin A. Measurement of texture in steel by laser-ultrasonic surface waves. 2nd International Symposium on Laser-Ultrasonics. Science, Technology and Applications Journal of Physics: Conference Series. 2011; 278: 1-4. https://doi.org/10.1088/1742- 6596/278/1/012007.
• 15. Maleki E, Unal O. Optimization of shot peening effective parameters on surface hardness improvement. Metals and Materials International. 2020;1-13. https://doi.org/10.1007/s12540-020-00758-x.
• 16. Mora P, Spies M. On the validity of several previously published perturbation formulas for the acoustoelastic effect on Rayleigh waves. Ultrasonics. 2019;91:114-120. https://doi.org/10.1016/j.ultras.2018.07.020.
• 17. Nazarchuk Z., Skalskyi V., Serhiyenko O. Acoustic emission: Methodology and Application. Foundations of Engineering Mechanics, Springer International Publishing AG: 2017. https://doi.org/10.1007/978-3-319-49350-3.
• 18. Pei C, Zhao S, Liu T, Chen Z. A new method for plastic strain measurement with Rayleigh wave polarization. Ultrasonics. 2018, 88. 168-173. https://doi.org/10.1016/j.ultras.2018.04.004.
• 19. Rucka M, Wojtczak E, Lachowicz J. Lamb wavebased monitoring of shear failure of an adhesive LAP joint. Diagnostyka. 2018;9(4):51-57. https://doi.org/10.29354/diag/95176.
• 20. Stupnyts’kyi TR, Student MM, Pokhmurs’ka HV, Hvozdets’kyi VM. Optimization of the chromium content of powder wires of the Fe-Cr-C and Fe-Cr-B systems according to the corrosion resistance of electric-arc coatings. Materials Science. 2016; 52(2): 165-172. https://doi.org/10.1007/s11003-016-9939-8.
• 21. Tarasenko AA, Jastrabik L, Tarasenko NA. Effects of roughness on the elastic surface wave propagation. European Physical Journal. Applied Physics. 2003; 24: 3-12. https://doi.org/10.1051/epjap:2003059.
• 22. Trško L, Fintová S, Nový F, Bokůvka O, Jambor M, Pastorek F, Florková Z, Oravcová M. Study of relation between shot peening parameter sand fatigue fracture surface character of an AW 7075 aluminium alloy. Metals. 2018;8(2):111. https://doi.org/10.3390/met8020111.
• 23. Ye C, Ume IC, Zhou Y, Reddy VV. Inspection of the residual stress on welds using laser ultrasonic supported with finite element analysis. Manufacturing Review. 2019;6(3):1-10. https://doi.org/10.1051/mfreview/2019001.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).