Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The paper is the second part of the work, devoted to a DC power supply with a power factor correction function. The power supply is equipped additionally with a shunt active power filter function, which enables the compensation of reactive and distortion power, generated by loads, connected to the same power grid node. A tunable inductive filter, included at the input of the power electronics current source – the main block of the power supply – allows for an improvement of the quality of the system control, compared to the device with a fixed inductive filter. This improvement was possible by extending the current source “frequency response”, which facilitated increasing the dynamics of current changes at the power supply input. The second part of the work briefly reminds the reader of the principle of operation and the structures of both the power supply control system and its power stage. The main purpose of this paper is to present the selected test results of the laboratory model of the electric system with the power supply.
Rocznik
Tom
Strony
art. no. e137938
Opis fizyczny
Bibliogr. 22 poz., rys., tab.
Twórcy
autor
- Poznan University of Technology, Faculty of Control, Robotics and Electrical Engineering, Piotrowo 3A, 60-965 Poznan, Poland
autor
- Poznan University of Technology, Faculty of Control, Robotics and Electrical Engineering, Piotrowo 3A, 60-965 Poznan, Poland
autor
- Poznan University of Technology, Faculty of Control, Robotics and Electrical Engineering, Piotrowo 3A, 60-965 Poznan, Poland
Bibliografia
- [1] M. Gwóźdź, Ł. Ciepliński, and M. Krystkowiak, “Power supply with parallel reactive and distortion power compensation and tunable inductive filter – Part 1,” Bull. Pol. Acad. Sci. Tech. Sci., vol. 68, no. 3, pp. 401–408, 2020.
- [2] Y. Ma, F. Hong, X. Zhou, and Z. Gao, “An overview on harmonic suppression,” 2018 Chinese Control and Decision Conference (CCDC), Shenyang, 2018, pp. 4943– 4948, doi: 10.1109/CCDC.2018.8407987.
- [3] M. Pasko, D. Buła, K. Dębowski, D. Grabowski, and M. Maciążek, “Selected methods for improving operating conditions of three-phase systems working in the presence of current and voltage deformation – part I,” Archives of Electrical Engineering, vol. 67, no. 3, pp. 591–602, 2018.
- [4] M. Siwczyński and M. Jaraczewski, “Reactive compensator synthesis in time-domain,” Bull. Pol. Acad. Sci. Tech. Sci., vol. 60, no. 1, pp. 119-124, 2012.
- [5] D. Buła and M. Pasko, “Stability analysis of hybrid active power filter,” Bull. Pol. Acad. Sci. Tech. Sci., vol. 62, no. 2, pp. 279–286, 2014.
- [6] S. Fryze, “Active, reactive, and apparent power in circuits with nonsinusoidal voltage and current”, Przegląd Elektrotechniczny, vol. 13, pp. 193–203, 1931.
- [7] M.H. Rashid, Power Electronics Handbook. Oxford, Elsevier, 2018.
- [8] M. Krystkowiak, “Modified model of wideband power electronics controlled current source with output current modulation,” Elektronika, vol. 57, no. 11, pp. 65–70, 2016 [in Polish].
- [9] Mitsubishi Electric, Intelligent Power Modules. [Online]. Available: http://www.mitsubishielectric.com/semiconductors/products/powermod/intelligentpmod/index.html [Accessed: 05 Feb. 2021].
- [10] Magnetics, [Online]. Available: https://www.mag-inc.com/home [Accessed: 05 Feb. 2021].
- [11] S. Saeed, R. Georgious, and J. Garcia, “Modeling of magnetic elements including losses application to variable inductor”, Energies, vol. 13, p. 1865, 2020, doi: 10.3390/en13081865.
- [12] E. Chong, and S. Zak. An Introduction to Optimization. 4th ed. Wiley Publishing, 2013.
- [13] Alfine-Tim [Online]. Available: http://analog.alfine.pl/oferta/produkty-alfine/systemy-uruchomieniowe [Accessed: 05 Feb. 2021].
- [14] M. Gwóźdź, Ł. Ciepliński, and A. Gąsiorek. “Real-time identification of the selected parameters of periodic signals,” Progress in Applied Electrical Engineering, PAEE, (on-line Conference), Kościelisko, Poland, 2020.
- [15] Standard EN 50160 (2010) – Voltage characteristics of electricity supplied by public distribution networks.
- [16] W. Kester, The Data Conversion Handbook. Newnes, Analog Devices Inc, 2005.
- [17] S. Pop, D. Pitica, and I. Ciascai, “Adaptive algorithm for error correction from sensor measurement,” 2008 31st International Spring Seminar on Electronics Technology, Budapest, 2008, pp. 373–378, doi: 10.1109/ISSE.2008.5276632.
- [18] J.C. Doyle, B.A. Francis, and A.R. Tannenbaum, Feedback Control Theory. Dover Publications, 2013.
- [19] T. Żabiński and L. Trybus, “Tuning P-PI and PI-PI controllers for electrical servos,” Bull. Pol. Acad. Sci. Tech. Sci., vol. 58, no. 1, pp. 51–58, 2010.
- [20] M. Naouar et al., “FPGA-based speed control of synchronous machine using a P-PI controller,” 2006 IEEE International Symposium on Industrial Electronics, Montreal, QC, Canada, 2006, pp. 1527–1532, doi: 10.1109/ISIE.2006.295698.
- [21] R. Porada and N. Mielczarek, “Modeling of chaotic systems in the ChaoPhS Program,” in Modelling Dynamics in Processes and Systems, W. Mitkowski, J. Kacprzyk, (Eds). Studies in Computational Intelligence, vol. 180, Springer, Berlin, Heidelberg, 2009, doi: 10.1007/978-3-540-92203-2_1.
- [22] Analog Devices, [Online]. Available: https://www.analog.com/en/products/adsp-21369.html#product-documentation [Accessed: 05 Feb. 2021].
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-a62f4250-da89-4584-9daf-fde2ae45279d