Post-fire impact behavior and durability of steel fiber-reinforced concrete containing blended cement-zeolite and recycled nylon granules as partial aggregate replacement

Nematzadeh, Mahdi; Nazari, Ali; Tayebi, Morteza

doi:10.1007/s43452-021-00324-1

Artykuł - szczegóły

Tytuł artykułu

Post-fire impact behavior and durability of steel fiber-reinforced concrete containing blended cement-zeolite and recycled nylon granules as partial aggregate replacement

Autorzy

Nematzadeh Mahdi , Nazari Ali , Tayebi Morteza

Wybrane pełne teksty z tego czasopisma

http://www.springer.com/journal/43452

Identyfikatory

DOI

10.1007/s43452-021-00324-1

Warianty tytułu

Języki publikacji

Abstrakty

Recycling polymeric waste in concretes to replace a portion of the stone aggregate volume can improve some of the mechanical features of concrete such as impact resistance, while also helping mitigate the associated environmental problems. Thus, this research was aimed at exploring the combined effect of nylon granules (0, 10, and 20%) as a replacement for fine aggregate, steel fibers (0, 0.75, and 1.25%), and zeolite (0, 10, 15, and 20%) as a replacement for cement on the impact resistance and durability of concrete following several heating levels (20, 300, and 600 °C). For this purpose, 432 concrete samples were manufactured, and the concrete features including compressive strength, tensile strength, impact resistance, loss of weight, water absorption, porosity, density, and failure type of concrete samples after different heating levels were investigated. The results demonstrated that the impact energy at the failure level declined considerably with temperature for all the concrete samples containing nylon granules and steel fibers (by 46–94% for 600 °C). However, increasing nylon granule content to 20% in concrete improved the impact resistance at the first and ultimate crack levels following exposure to 20 and 300 °C, while significantly lowering this parameter (by up to 40%) following exposure to 600 °C. Furthermore, the inclusion of steel fibers in concrete and increasing its content led to increased impact energy of the heated and non-heated concretes.

Słowa kluczowe

recycled nylon granule natural zeolite steel fiber impact resistance durability properties elevated temperatures

włókno stalowe zeolit trwałość

Wydawca

Springer
Wrocław University of Science and Technology

Czasopismo

Archives of Civil and Mechanical Engineering

Rocznik

2022

Tom

Vol. 22, no. 1

Strony

art. no. e5, 2022

Opis fizyczny

Bibliogr. 49 poz., fot., rys., tab., wykr.

Twórcy

autor

Nematzadeh Mahdi

m.nematzadeh@umz.ac.ir

Department of Civil Engineering, Faculty of Engineering and Technology, University of Mazandaran, Babolsar, Iran

autor

Nazari Ali

Department of Civil Engineering, Faculty of Engineering and Technology, University of Mazandaran, Babolsar, Iran

autor

Tayebi Morteza

Department of Civil and Environmental Engineering, Politecnico di Milano, Piazza Leonardo da vinci 32, 20133, Milano, Italy

Bibliografia

1. Yuan Z, Jia Y. Mechanical properties and microstructure of glass fiber and polypropylene fiber reinforced concrete: an experimental study. Constr Build Mater. 2021;266:121048.
2. Hosseini SA, Nematzadeh M, Chastre C. Prediction of shear behavior of steel fiber-reinforced rubberized concrete beams reinforced with glass fiber-reinforced polymer (GFRP) bars. Comp Struct. 2021;256:113010.
3. Nematzadeh M, Mousavimehr M, Shayanfar J, Omidalizadeh M. Eccentric compressive behavior of steel fiber-reinforced RC columns strengthened with CFRP wraps: experimental investigation and analytical modeling. Eng Struct. 2021;226:111389.
4. Nematzadeh M, Hosseini SA, Ozbakkaloglu T. The combined effect of crumb rubber aggregates and steel fibers on shear behavior of GFRP bar-reinforced high-strength concrete beams. J Build Eng. 2021;44:102981.
5. Nematzadeh M, Fallah-Valukolaee S. Experimental and analytical investigation on structural behavior of two-layer fiber-reinforced concrete beams reinforced with steel and GFRP rebars. Constr Build Mater. 2021;273:121933.
6. Sindu BS, Sasmal S. On the development and studies of nano-and micro-fiber hybridized strain hardened cementitious composite. Arch Civ Mech Eng. 2019;19:348–59.
7. Kim JJ, Yoo DY. Spacing and bundling effects on rate-dependent pullout behavior of various steel fibers embedded in ultra-high-performance concrete. Arch Civ Mech Eng. 2020;20(2):1–18.
8. Girskas G, Kizinievič O, Kizinievič V. Analysis of durability (Frost resistance) of MSWI fly ash modified cement composites. Arch Civ Mech Eng. 2021;21(2):1–12.
9. Ţibea C, Bompa DV. Ultimate shear response of ultra-high-performance steel fibre-reinforced concrete elements. Arch Civ Mech Eng. 2020;20(2):1–16.
10. Tayebi M, Nematzadeh M. Post-fire flexural performance and microstructure of steel fiber-reinforced concrete with recycled nylon granules and zeolite substitution. In Struct. 2021;33:2301–16.
11. Dashti J, Nematzadeh M. Compressive and direct tensile behavior of concrete containing Forta-Ferro fiber and calcium aluminate cement subjected to sulfuric acid attack with optimized design. Constr Build Mater. 2020;253:118999.
12. Damtoft JS, Lukasik J, Herfort D, Sorrentino D, Gartner EM. Sustainable development and climate change initiatives. Cem Concr Res. 2008;38(2):115–27.
13. Caputo D, Liguori B, Colella C. Some advances in understanding the pozzolanic activity of zeolites: the effect of zeolite structure. Cement Concr Compos. 2008;30(5):455–62.
14. Nematzadeh M, Baradaran-Nasiri A, Hosseini M. Effect of pozzolans on mechanical behavior of recycled refractory brick concrete in fire. Struct Eng Mech. 2019;72(3):339–54.
15. Hoła J, Książek M. Research on usability of sulphur polymer composite for corrosion protection of reinforcing steel in concrete. Arch Civ Mech Eng. 2009;9(1):47–59.
16. Nematzadeh M, Mousavimehr M. Residual compressive stress-strain relationship for hybrid recycled PET–crumb rubber aggregate concrete after exposure to elevated temperatures. J Mater Civ Eng. 2019;31(8):04019136.
17. Mujdeci A, Bompa DV, Elghazouli AY. Confinement effects for rubberised concrete in tubular steel cross-sections under combined loading. Arch Civ Mech Eng. 2021;21(2):1–20.
18. Güneyisi E, Gesoglu M, Naji N, İpek S. Evaluation of the rheological behavior of fresh self-compacting rubberized concrete by using the Herschel-Bulkley and modified Bingham models. Arch Civ Mech Eng. 2016;16:9–19.
19. AbdelAleem BH, Ismail MK, Hassan AA. The combined effect of crumb rubber and synthetic fibers on impact resistance of self-consolidating concrete. Constr Build Mater. 2018;162:816–29.
20. Mahakavi P, Chithra R. Impact resistance, microstructures and digital image processing on self-compacting concrete with hooked end and crimped steel fiber. Constr Build Mater. 2019;220:651–66.
21. Mustafa MAT, Hanafi I, Mahmoud R, Tayeh BA. Effect of partial replacement of sand by plastic waste on impact resistance of concrete: experiment and simulation. In: Structures, vol. 20. Amsterdam: Elsevier; 2019. p. 519–26.
22. Stawiski B. Attempt to estimate fire damage to concrete building structure. Arch Civ Mech Eng. 2006;6(4):23–9.
23. Karimi A, Nematzadeh M. Axial compressive performance of steel tube columns filled with steel fiber-reinforced high strength concrete containing tire aggregate after exposure to high temperatures. Eng Struct. 2020;219:110608.
24. Hertz KD. Concrete strength for fire safety design. Mag Concr Res. 2005;57(8):445–53.
25. Nematzadeh M, Karimi A, Fallah-Valukolaee S. Compressive performance of steel fiber-reinforced rubberized concrete core detached from heated CFST. Constr Build Mater. 2020;239:117832.
26. Correia JR, Lima JS, de Brito J. Post-fire mechanical performance of concrete made with selected plastic waste aggregates. Cement Concr Compos. 2014;53:187–99.
27. Marques AM, Correia JR, De Brito J. Post-fire residual mechanical properties of concrete made with recycled rubber aggregate. Fire Saf J. 2013;58:49–57.
28. Nematzadeh M, Shahmansouri AA, Fakoor M. Post-fire compressive strength of recycled PET aggregate concrete reinforced with steel fibers: optimization and prediction via RSM and GEP. Constr Build Mater. 2020;252:119057.
29. Guo YC, Zhang JH, Chen GM, Xie ZH. Compressive behaviour of concrete structures incorporating recycled concrete aggregates, rubber crumb and reinforced with steel fibre, subjected to elevated temperatures. J Clean Prod. 2014;72:193–203.
30. ASTM C150/C150M-12 Standard Specification for Portland Cement. Annual Book of ASTM Standards, 2012.
31. ASTM C618-19 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. Annual Book of ASTM Standards. 2012.
32. ASTM C33/C33M-16. Standard specification for concrete aggregates. Annual Book of ASTM Standards. 2016.
33. ACI Committee 211.1-91. Standard practice for selecting proportions for normal, heavyweight, and mass concrete. ACI manual of concrete practice, Part1, American Concrete Institute, Michigan (USA), 2000. p. 38.
34. Fakoor M, Nematzadeh M. A new post-peak behavior assessment approach for effect of steel fibers on bond stress-slip relationship of concrete and steel bar after exposure to high temperatures. Constr Build Mater. 2021;278:122340.
35. Bahrami A, Nematzadeh M. Effect of rock wool waste on compressive behavior of pumice lightweight aggregate concrete after elevated temperature exposure. Fire Technol. 2021;57:1–32.
36. ASTM C 143/C 143M. Standard test method for slump of hydraulic cement concrete. Annual Book of ASTM Standards; 2012.
37. ASTM C192/C192M. Standard practice for making and curing concrete test specimens in the laboratory. West Conshohocken: American Society for Testing and Materials International; 2016.
38. International Organization for Standardization. Fire-resistance tests: elements of building construction. Commentary on test method and guide to the application of the outputs from the fire-resistance test. ISO834. Geneva: International Organization for Standardization; 2012.
39. ASTM C39. Standard test method for compressive strength of cylindrical concrete specimens. Annual Book of ASTM Standards. Philadelphia: ASTM; 2016.
40. ASTM C496. Standard test method for splitting tensile strength of cylindrical concrete specimens. Annual Book of ASTM Standards. Philadelphia: ASTM; 2016.
41. ASTM C642. Standard test method for density, absorption, and voids in hardened concrete. Philadelphia: ASTM; 2016.
42. ACI 544.2R-89. Measurement of properties of fiber reinforced concrete. West Conshohocken: ACI; 1999.
43. Fallah-Valukolaee S, Nematzadeh M. Experimental study for determining applicable models of compressive stress–strain behavior of hybrid synthetic fiber-reinforced high-strength concrete. Eur J Environ Civ Eng. 2020;24(1):34–59.
44. Poon CS, Azhar S, Anson M, Wong YL. Performance of metakaolin concrete at elevated temperatures. Cement Concrete Compos. 2003;25:83–9.
45. Khabaz A. Analysis of sliding mechanism of straight steel fibers in concrete and determine the effect of friction. Arch Civ Mech Eng. 2017;17:599–608.
46. Nili M, Afroughsabet V. Combined effect of silica fume and steel fibers on the impact resistance and mechanical properties of concrete. Int J Impact Eng. 2010;37(8):879–86.
47. Seneviratne C, Gunasekara C, Law DW, Setunge S, Robert D. Creep, shrinkage and permeation characteristics of geopolymer aggregate concrete: long-term performance. Arch Civ Mech Eng. 2020;20(4):1–15.
48. Filazi A, Demir I, Sevim O. Enhancement on mechanical and durability performances of binary cementitious systems by optimizing particle size distribution of fly ash. Arch Civ Mech Eng. 2020;20:1–13.
49. Purkiss JA. Thermal expansion of steel fibre reinforced concrete up to 800 C. In: Composite structures, vol. 4. Dordrecht: Springer; 1987. p. 404–15.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-a618b357-8641-43b4-9d12-a36dcfd28c78