Laser-Assisted Copper Oxidation

• Autorzy: Musztyfaga-Staszuk M. , Gawlińska-Nęcek K. , Janicki D. , Panek P.

Identyfikatory

DOI

10.24425/amm.2020.132818

• Języki publikacji: EN

Abstrakty

EN

The paper proposes a method for copper sheet oxidation by using a laser beam. The thickness of the oxide layer increases with temperature growth; therefore, the proper parameters of the experiment such as pulse power, frequency and the speed of the beam were adjusted. High power diode laser was used in the investigations. The topography of the oxidised copper sheets was determined using atomic force microscopy (AFM) and scanning electron microscopy with EDS analyses. Optical parameters of the deposited layer were characterised by spectrophotometry. Both roughness and thickness of the investigated samples were measured using the confocal laser scanning microscope. The technological recommendations for the laser micro-machining technology to obtain copper sheet oxidation by using the high power laser beam were selected.

Słowa kluczowe

EN

Cu; CuO; Cu2O; laser micro-processing

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2020
• Tom: Vol. 65, iss. 2
• Strony: 767--770
• Opis fizyczny: Bibliogr. 15 poz., fot., rys., tab.

Twórcy

autor

Musztyfaga-Staszuk M.

• Silesian University of Technology, Welding Department, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Gawlińska-Nęcek K.

• Institute of Metallurgy and Materials Science PAS, 25 Reymonta Str., 30-059 Kraków, Poland

autor

Janicki D.

• Silesian University of Technology, Welding Department, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Panek P.

• Research and Development Center of Technology for Industry, 59 Złota Str, 00-120 Warsaw, Poland

Bibliografia

• [1] R. Velmurugan, A. Incharoensakdi, Concepts and Controversies 1, 407-428 (2018).
• [2] M. Doble, A. K. Kruthiventi, Industrial Examples, Green Chemistry and Engineering, 245-296 (2007).
• [3] H. H. Wang, Flexible Chemical Sensors, Photovoltaics and Electronics to Sensors and Energy Storage/Harvesting Devices Micro and Nano Technologies, 247-273 (2010).
• [4] Z.-X. Shen, D. S. Dessau, Physics Reports 253, 1-3, 1-162, (1995).
• [5] R. Jose, V. Thavasi, S. Ramakrishna, J. Am. Ceram. Soc. 92, 289-301 (2009).
• [6] Ø. Nordseth, R. Kumar, K. Bergum, L. Fara, C. Dumitru, Dan Craciunescu 3, F. Dragan, I. Chilibon, E. Monakhov, S. E. Foss, B. G. Svensson, Materials. Perform (2018), DOI:10.3390/ma11122593.
• [7] S. Chatterjee, S. K. Saha, A. J. Pal, Solar Energy Materials & Solar Cells 147, 17-26 (2016).
• [8] https://www.skb.se/publikation/2303589/TR-11-08.pdf, accessed: 0912.2019
• [9] L. De Los Santos Valladares, D. Hurtado Salinas, A. Bustamante Dominguez, D. Acosta Najarro, S. I. Khondakerf, T. Mitrelias, C. H. W. Barnes, J. Albino Aguiar, Y. Majima, Thin Solid Films 520, 6368-6374 (2012).
• [10] J. Bai, L. Yang, B. Dai, Y. Ding, Q. Wang J. Han, J. Zhu, Applied Surface Science 452, 259-267 (2018).
• [11] A. O. Musa, T. Akomolafe, M. J. Carter, Solar Energy Materials and Solar Cells 51, 3-4, 305-316 (1998).
• [12] P. J. Kelly, R. D. Arnell, Vacuum 56, 3, 159-172 (2000).
• [13] M. Ritala1, K. Kukli, A. Rahtu, P. I. Räisänen, M. Leskelä, T. Sajavaara, J. Keinonen, Science 288, 5464 (2000).
• [14] V. P. Veiko, E. A. Shakhno, A. G. Poleshchuk, V. N. Matyzhonok, LMN 3, 3, 201-205 (2008).
• [15] V. Najarian, W. Boyd, F. N.Goodall, G. Arthur, Applied Surface Science 36, 1-4, 134-140 (1989).

Uwagi

EN

1. This publication is co-funded by the National Centre for Research and Development within the framework of the project No. TECHMATSTRATEG/2/ 409122/3/NCBR/2019 entitled: “Development of production technology for silicon-free photovoltaic cells.”

PL

2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).