Water absorption and mechanical behaviour of green fibres and particles acting as reinforced hybrid composite materials

• Autorzy: Kchaou Mohamed , Arul Sujin Jose , Athijayamani A. , Adhikary Priyabrata , Murugan S. , Aldawood Faisal Khaled , Abualkhair Hussain F.
• Języki publikacji: EN

Abstrakty

EN

This paper highlights the results of an experimental study on the preparation and characterization of Luffa cylindrica fiber (LCF) and groundnut shell particle (GSP) reinforced phenol-formaldehyde (PF) hybrid composites. The amount of LCFs was fixed at 25 wt%, while the amount of groundnut shell particles ranged from 0 to 25 wt%. Observations were made regarding the water absorption and thickness swelling behaviour of prepared hybrid composites. In addition, the mechanical behaviours of hybrid composites have been studied under both dry and wet conditions. In comparison to dry conditions, the mechanical properties of the hybrid composites were lower when they were wet. Hybrid composites comprising 25% Luffa cylindica fibre and 15% groundnut shell particle (25LCF/15GSP) exhibit the highest level of mechanical properties under both conditions. The percentages of water absorption and thickness swelling increase as groundnut shell particles increase. The composite 25LCF/25GSP exhibited the highest percentage of water absorption and thickness swelling. Compared to date palm leaf (DPL)-reinforced composites, 25LCF/15GSP showed more significant mechanical and physical properties. We concluded that the inclusion of groundnut shell particles in LCF/PF composites substantially improved the mechanical properties of the hybrid composite. The range of increment, however, was narrower under moist conditions compared to dry conditions.

Słowa kluczowe

EN

luffa cylindrica fibre; groundnut shell particles; phenol-formaldehyde; water absorption; mechanical properties; date palm leaf

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2023
• Tom: Vol. 41, No. 4
• Strony: 132--143
• Opis fizyczny: Bibliogr. 134 poz., rys., tab.

Twórcy

autor

Kchaou Mohamed

• Department of Mechanical Engineering, College of Engineering, University of Bisha, Bisha 67714, P.O. Box 001, Saudi Arabia

autor

Arul Sujin Jose

• Automobile Engineering, New Horizon College of Engineering, Bangalore, India

autor

Athijayamani A.

• Mechanical Engineering, Alagappa Chettiar Govt College of Engineering, Karaikudi, Tamilnadu, India

autor

Adhikary Priyabrata

• New Horizon College of Engineering, Bangalore, India

autor

Murugan S.

• Department of Biomedical Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Saveetha University, ChennaiTamil Nadu, India

autor

Aldawood Faisal Khaled

• Department of Mechanical Engineering, College of Engineering, University of Bisha, Bisha 67714, P.O. Box 001, Saudi Arabia

autor

Abualkhair Hussain F.

• Department of Mechanical Engineering, College of Engineering, Taif UniversityTaif, Saudi Arabia

Bibliografia

• [1] Nabi Saheb D, Jog JP. Natural fiber polymer composites: a review. Adv Poly Technol. 1999;18(4):351–63.
• [2] Sinha AK, Narang HK, Bhattacharya S. Mechanical properties of natural fiber polymer composites. J Polym Eng. 2017;37(9):879–95.
• [3] Khalid MY, Rashid AA, Arif ZU, Ahmed W, Arshad H, Zaidi AA. Natural fiber reinforced composites: sustainable materials for emerging applications. Results Eng. 2021;11:100263.
• [4] Chen Y, Su N, Zhang K, Zhu S, Zhu Z, Qin W, et al. Effect of fiber surface treatment on structure, moisture absorption and mechanical properties of Luffa sponge fiber bundles. Ind. Crop. Prod. 2018;123:341–52,
• [5] Boynard CA, Monteiro SN, d’Almeida JRM. Aspects of alkali treatment of sponge gourd (Luffa cylindrica) fibers on the flexural properties of polyester matrix composites. J Appl Polym Sci. 2003;87(12):1927–32. doi: 10.1002/app.11522
• [6] Ghali L, Msahli S, Zidi M, Sakli F. Effects of fiber weight ratio, structure and fiber modification onto flexural properties of Luffa-polyester composites. Adv Mater Phys Chem. 2011;1(3):78.
• [7] Shen J, Xie YM, Huang X, Zhou S, Ruan D. Mechanical properties of Luffa sponge. J Mech Behav Biomed Mater. 2012;15:141–52. doi: 10.1016/j.jmbbm.2012.07.004
• [8] Mohanta N, Acharya SK. Tensile, flexural and interlaminar shear properties of Luffa cylindrica fiber reinforced epoxy composites. Int J Macromol Sci. 2013;3: 6–10.
• [9] Mohanta N, Acharya SK. Mechanical and tribological performance of Luffa cylindrica fiber-reinforced epoxy composite. BioRes. 2015;10(4):8364–77.
• [10] Satishkumar N, Purushothaman N, Raghuram P. An investigation on Luffa cylindrica fiber reinforced epoxy composite. Mater Today: Proc. 2020;33(1):1026–31.
• [11] Mehra AK, Saini R, Kumar A. The effect of fiber contents on mechanical and moisture absorption properties of gourd sponge/coir fiber reinforced epoxy hybrid composites, Compos Commun. 2021;25:100732.
• [12] Raveendran K, Ganesh A, Khilart KC. Influence of mineral matter on biomass pyrolysis characteristics. J Fuel. 1995;74:1812–22.
• [13] Raju GU, Kumarappa S. Experimental study on mechanical properties of groundnut shell particle-reinforced epoxy composites. J Reinforc Plast Compos. 2011; 30(12):1029–37.
• [14] Gumel SM, Adam JL, Habibu S. Tensile properties of treated and untreated groundnut shell filled natural rubber composites. J Appl Chem. 2014;7(10):40–44.
• [15] Adeosun S, Taiwo O, Akpan E, Gbenebor O, Gbagba S, Olaleye S. Mechanical characteristics of groundnut shell particle reinforced polylactidenano fiber. Rev Mater. 2016;21(2):482–91.
• [16] Usman MA, Momohjimoh I, Gimba ASB. Effect of groundnut shell powder on the mechanical properties of recycled polyethylene and its biodegradability. JM MCE. 2016;4:228–40.
• [17] Kisan U, Dubey V, Kumar Sharma A, Mital A. Synthesis of groundnut shell/rice husk hybrid composite–a review. IOP Conf. Ser Mater Sci Eng. 20221;1116(012001): 1–16.
• [18] Potadar OV, Kadam GS. Preparation and testing of composites using waste groundnut shells and coir fibers. Procedia Manuf. 2018;20:91–6.
• [19] Nyior GB, Aye SA, Tile SE. Study of mechanical properties of raffia palm fiber/groundnut shell reinforced epoxy hybrid composites. JMMC E. 2018;6:179–92.
• [20] Adeosun S, Taiwo O, Akpan E, Gbenebor O, Gbagba S, Olaleye S. Mechanical characteristics of groundnut shell particle reinforced polylactide nano fibre. Matéria (rio De Janeiro). 2016;21(2):482–91. doi: 10.1590/S1517-707620160002.0045
• [21] Sathiparan N, Anburuvel A, Selvam VV. Utilization of agro-waste groundnut shell and its derivatives in sustainable construction and building materials – a review. J Build Eng. 2023;66:105866. ISSN 2352-7102. doi: 10.1016/j.jobe.2023.105866
• [22] ASTM D638-14, Standard Test Method for Tensile Properties of Plastics. ASTM International, West Conshohocken. 2014;1–17.
• [23] ASTM D790-17, Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. ASTM International, West Conshohocken. 2017;1–12.
• [24] ISO 180:2019, Plastics – Determination of Izod impact strength. 2019;1–13.
• [25] ASTM D570-98, Standard Test for Water Absorption of Plastics. 2018;1–4.
• [26] Sapiai N, Jumahat A, Jawaid M, Midani M, Khan M. Tensile and flexural properties of silica nanoparticles modified unidirectional kenaf and hybrid glass/kenaf epoxy composites. Polymers. 2020;12(11):2733.
• [27] Ashok KG, Kalaichelvan K, Damodaran A. Effect of nano fillers on mechanical properties of luffa fiber epoxy composites. J Nat Fibers. 2022;19(4):1472–89.
• [28] Muñoz E, García-Manrique JA. Water absorption behaviour and its effect on the mechanical properties of flax fiber reinforced bioepoxy composites. Int J Polym Sci. 2015;2015:1–10.
• [29] Haameem MJA, Abdul Majida MS, Afendi M, Marzukib HFA, Ahmad Hilmib E, Fahmia I, Gibson AG. Effects of water absorption on Napier grass fibre/polyester composites. Compos Struct. 2016;144:138–146.
• [30] Espert A, Vilaplana F, Karlsson S. Comparison of water absorption in natural cellulosic fibers from wood and one-year crops in polypropylene composites and its influence on their mechanical properties. Compos Part A Appl Sci Manuf. 2004;35:1267–76.
• [31] Bollino F, Giannella V, Armentani E, Sepe R. Mechanical behavior of chemically-treated hemp fibers reinforced composites subjected to moisture absorption. J Mater Res Technol. 2023;22:762–75.
• [32] Al-Sulaiman FA. Mechanical properties of date palm fiber reinforced composites. Appl Compos Mater. 2002;9:369–77. doi: 10.1023/A:1020216906846
• [33] Sreekala MS, Kumaran MG, Thomas S. Water sorption in oil palm fiber reinforced phenol formaldehyde composites. Compos Part A Appl Sci Manuf. 2002;33(6):763–77.
• [34] Sanjeevi S, Shanmugam V, Kumar S, et al. Effects of water absorption on the mechanical properties of hybrid natural fiber/phenol formaldehyde composites. Sci Rep. 2021;11:13385. doi: 10.1038/s41598-021-92457-9