Metrological equipment for verification and calibration of non-automatic weighing instruments – axle and crane weighting instrument

• Autorzy: Gajdosik Tomas , Kucera Lubos , Gajdac Igor , Fric Anton , Markovic Jaromir

Identyfikatory

DOI

10.24425/mms.2021.136615

• Języki publikacji: EN

Abstrakty

EN

The paper deals with the design of equipment for verification and calibration of axle and crane weighing instruments. In its introduction, it discusses the basic concepts of axle and crane weighing instruments, their calibration, and verification. The paper briefly describes the original technical design solution used in the calibration and verification of these weighing instruments. Subsequently, the article describes the legislative, technical and functional requirements for metrological equipment being developed. The paper presents two design solutions for handling calibration weights. In both solutions, the construction and individual functional parts of the equipment are described. Both of these solutions were designed and tested in practical measurements in the Laboratory for Testing of Weighing Instruments of the Slovak Legal Metrology n.o. Finally, the paper presents the results of the development of a new measuring system at the University of Žilina.

Słowa kluczowe

EN

metrology; calibration; verification; weights; design

• Wydawca: Komitet Metrologii i Aparatury Naukowej PAN
• Czasopismo: Metrology and Measurement Systems
• Rocznik: 2021
• Tom: Vol. 28, nr 2
• Strony: 397--407
• Opis fizyczny: Bibliogr. 9 poz., rys., tab., wzory

Twórcy

autor

Gajdosik Tomas

• University of Žilina, Faculty of Mechanical Engineering, Department of Design and Mechanical Elements, Univerzitná 8215/1, 010 26 Žilina, Slovakia

autor

Kucera Lubos

• University of Žilina, Faculty of Mechanical Engineering, Department of Design and Mechanical Elements, Univerzitná 8215/1, 010 26 Žilina, Slovakia

autor

Gajdac Igor

• University of Žilina, Faculty of Mechanical Engineering, Department of Design and Mechanical Elements, Univerzitná 8215/1, 010 26 Žilina, Slovakia

autor

Fric Anton

• Slovak Legal Metrology, Hviezdoslavova 1124/31, 974 01 Banská Bystrica, Slovakia

autor

Markovic Jaromir

• Slovak Legal Metrology, Hviezdoslavova 1124/31, 974 01 Banská Bystrica, Slovakia

Bibliografia

• [1] Ivanova, T., & Rudzitis, J. (2010). High Precision Mass Measurement in Automation. Proceedings of 5th International Conference on Mechatronic Systems and Materials, Lithuania, 19-24. https://doi.org/10.4028/www.scientific.net/SSP.164.19
• [2] Bisták, M., Medvecký, Š., & Hrček, S., (2017). Axle Weighing System. Proceedings of 58th International Conference on Machine Design Departments, Czech Republic, 36-39. https://2017.icmd.cz/proceedings/7_ICMD.pdf
• [3] Valcu, A., (2012). Interlaboratory Comparison of Five Standard Weights of Class F-2 in Several Romanian Laboratories. MAPAN Journal of Metrology Society of India, 27(3), 183-188. https://doi.org/10.1007/s12647-012-0018-9
• [4] Gramblicka, S., Kohar, R., & Madaj, R. (2017). Construction Design Automatically Adjustable Mechanism for Crane Forks. Proceedings of 58th International Conference on Machine Design Departments, Czech Republic, 100-103. https://2017.icmd.cz/proceedings/19_ICMD.pdf
• [5] Maury-Toledo, A., & García, J. A. M. (2018). Evaluation of a dead weight torque machine by a generalized least square approach. Measurement, 119(4), 91-96. https://doi.org/10.1016/j.measurement.2018.01.051
• [6] Analytical Methods Committee AMCTB No 86. (2019). Revision of the International System of Units (Background paper). Analytical Methods, 11(12), 1577-1579. https://doi.org/10.1039/C9AY90028D
• [7] Bisták, M., Medvecký, Š., & Hrček, S. (2017). The above-ground weighbridge. Procedia engineering, 192, 52-57. https://doi.org/10.1016/j.proeng.2017.06.009
• [8] Palencar, M., Wimmer, G., & Klvacova, S. (2015). Two Approaches to Obtain the Calibration Line. Proceedings of 11th International Conference on Measurement, Slovakia, 43-46. https://doi.org/10.23919/MEASUREMENT.2017.7983532
• [9] Palencar, R., Duris, S., & Pavlasek, P. (2015). Least-Square Method and Type B Evaluation of Standard Uncertainty. Proceedings of International Conference on Advanced Mathematical and Computational Tools in Metrology and Testing, Russia, 279-284. https://doi.org/10.1142/9789814678629_0034

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).