PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Modelling the Dependencies Between the Structure of Feeding Streams and the Parameters of Cotton/Polyester Blended Yarns Manufactured with the Use of Ring- and Rotor Spinning Machines

Identyfikatory
Warianty tytułu
PL
Modelowanie związków zachodzących między strukturą strumieni zasilających i parametrami przędz mieszankowych bawełna : włókna poliestrowe formowanych na przędzarkach obrączkowych i rotorowych
Języki publikacji
EN
Abstrakty
EN
This work presents an analysis of the parameters of cotton, polyester, and blended cotton/polyester yarns manufactured using PJ ring-, and BD 200S & R1 Rieter rotor spinning machines. Cotton/polyester blended yarns of 30 tex with a share of polyester fibres from zero to 100% were spun with the use of each of the selected spinning frames. We analysed the influence of the polyester fibre content in the blends on the structural parameters of carded and combed yarns with a constant twist coefficient.
PL
W pracy przeprowadzono analizę parametrów przędz bawełnianych, poliestrowych i mieszankowych bawełniano-poliestrowych wykonanych na przędzarkach obrączkowych PJ, oraz rotorowych BD 200S i R1 firmy Rieter. Na przędzarkach wykonano przędze mieszankowe bawełna/włóknapoliestrowe 30 tex z udziałem włókien poliestrowych od zera do 100%. Analizowano wpływ udziałów włókien poliestrowych w mieszankach na parametry strukturalne przędz zgrzeblonych i czesanych formowanych ze stałym współczynnikiem skrętu.
Rocznik
Strony
32--37
Opis fizyczny
Bibliogr. 16 poz., rys., tab.
Twórcy
  • Computer Engineering Department Technical University of Łódź, Poland Al. Politechniki 11, 90-942
autor
  • Department of Spinning Technology and Yarn Structure Faculty of Textile Engineering and Marketing Technical University of Łódź ul. Żeromskiego 116, 90-543 Łódź, Poland
autor
  • Department of Spinning Technology and Yarn Structure Faculty of Textile Engineering and Marketing Technical University of Łódź ul. Żeromskiego 116, 90-543 Łódź, Poland
autor
  • Department of Spinning Technology and Yarn Structure Faculty of Textile Engineering and Marketing Technical University of Łódź ul. Żeromskiego 116, 90-543 Łódź, Poland
Bibliografia
  • 1. Barella A., ‘Yarn Hairiness’, The Textile Institute, Vol. 13, p. 61, 1983.
  • 2. Baykal P. D., Babaarlson D., Erol R., ‘Prediction of Strength and Elongation Properties of Cotton-Polyester-Blended OE Rotor Yarns’. Fibres and Textiles in Eastern Europe, vol. 14, 2006, No.1, p.18-21.
  • 3. Cyniak D., Czekalski J., Jackowski T., Popin Ł. ‘Quality Analysis of Cotton/Polyester Yarn Blends Spun with the Use of a Rotor Spinning Frame’, Fibres & Textiles in Eastern Europe, vol. 14, No. 3, (57) 2006, pp. 33-37.
  • 4. Cyniak D., Czekalski J., Jackowski T. ‘Influence of Selected Parameters of the Spinning Process on the State of Mixing of Fibres of a Cotton/Polyester-Fibre Blend Yarn’, Fibres & Textiles in Eastern Europe, vol. [14], No. 4, 2006, pp. 36-40
  • 5. Das D., Ishiaque S.M., Veit D., Gmes T. ‘Application of artificial neural network to predict rotor spun yarn properties’. Melliand International 2004, No. 3, p. 183.
  • 6. ‘Global chemical fibre production 38 million tons’. Chemical Fibres International, vol. 55, 2005, No. 2, p. 6.
  • 7. Göktepe E., Lawrance C.A. ‘Deformation of Yarn Cross-Section in Relation to Yarn Structure.’ Fibres & Textiles in Eastern Europe, 2001, vol. 9, No. 2. pp. 18-22.
  • 8. Jabłoński W., Jackowski T.: Nowoczesne systemy przędzenia Bielsko-Biała 2001.
  • 9. Jackowski T., Cyniak D Czekalski J., ‘Influence of selected fibre parameters decisive on the quality of spun yarns’ (in Polish), Przegląd Włókienniczy, 2006, No. 2, p. 53.
  • 10. Jackowski T., Chylewska B., Cyniak D., Czekalski J., Jackowska-Strumiłło L., ‘Modelling the relationship between feeding sliver structures and parameters of cotton/linen blended yarns’, Fibres & Textiles in Eastern Europe, 2003. vol. 11, No. 2, pp. 12-17.
  • 11. Jackowski T., Chylewska B., Cyniak D., Jackowska-Strumiłło L. ‘Investigating and Modelling Yarn Parameters for Different Feeding Slivers’. Fibres &Textiles in Eastern Europe, 2002. vol. 10, No.1, pp. 49-51.
  • 12. Jiang Y.,Chen X. ‘Geometric and algebraic algorithms for modelling yarn in woven fabrics.’ Textile Research Journal, vol. 96, 2005, No 4, pp. 237-245.
  • 13. Neckar B., Soni M.K., Das D. ‘Modelling of Radial Fiber Migration in Yarns,’ Textile Research Journal, vol. 76, 2006, No. 6, pp. 486-491.
  • 14. Oxenham W. ‘Innovations in spun yarn technologies – present and future’. Indian Journal of Fibre & Research, vol. 31, 2006, pp.116-124.
  • 15. Szydłowski H.: Teoria pomiarów, WNT, Warsaw, 1981.
  • 16. Tyagi G. K., Chatterjee K. N.: ‘Contribution of doubling to the characteristics of polyester-cotton ring- and rotor-spun yarns’, Indian Journal of Fibre & Research, 1992.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-a55554fc-5d83-45f3-a683-f5d63b1eac8d
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.