Performance of sensorless control of permanent magnet synchronous generator in wind turbine system

• Autorzy: Gajewski P. , Pieńkowski K.

Identyfikatory

DOI

10.5277/PED160210

• Języki publikacji: EN

Abstrakty

EN

The paper presents a sensorless control of permanent magnet synchronous generator (PMSG) in a variable-speed wind energy conversion system. The system of wind turbine consists of PMSG and back-to-back power converter. The back-to-back converter system is composed of machine side converter (MSC) and grid side converter (GSC). In the control of MSC and GSC the methods of vector control have been applied. For operation of MSC the method of Rotor Field Oriented Control (RFOC) with MPPT algorithm has been used. For estimation of angular rotor position and angular speed the flux linkage estimator with synchronous frame phase locked loop (SF-PLL) has been used. In the control of GSC the method of Voltage Oriented Control (VOC) has been considered. Simulation studies have been carried out in order to evaluate the system of sensorless strategy. The results of simulation studies demonstrate the high efficiency and high accuracy of the sensorless control system considered.

Słowa kluczowe

EN

wind turbine; PMSG; power converters; sensorless algorithm; simulation studies

• Wydawca: De Gruyter
• Czasopismo: Power Electronics and Drives
• Rocznik: 2016
• Tom: Vol. 1 (36), No. 2
• Strony: 165--174
• Opis fizyczny: Bibliogr. 10 poz., rys., tab.

Twórcy

autor

Gajewski P.

• Department of Electrical Machines, Drives and Measurements, Wrocław University of Science and Technology, ul. Smoluchowskiego 19, Wrocław, Poland

autor

Pieńkowski K.

• Department of Electrical Machines, Drives and Measurements, Wrocław University of Science and Technology, ul. Smoluchowskiego 19, Wrocław, Poland

Bibliografia

• [1] BURGOS R.P., KSHIRSAGAR P., LIDOZZI A., JANG J., WANG F., BOROYEVICH D., RODRIGUEZ P., SUL SEUNG K., Design and Evaluation of a PLL-Based Position Controller for Sensorless Vector Control of Permanent-Magnet Synchronous Machines, 32nd Annual Conference on IEEE Industrial Electronics IECON, Paris, France, 2006, 5081–5086.
• [2] DIAZ S.A., SILVA C., JULIET J., MIRANDA H., Indirect sensorless speed control of a PMSG for wind application, IEEE International Electric Machines and Drives Conference, IEMDC ’09, 1844–1850.
• [3] ERRAMI Y., MAAROUFI M., OUASSAID M., Modeling and control strategy of PMSG based variable speed wind energy conversion system, International Conference on Multimedia Computing and Systems (ICMCS), 2011, 1–6.
• [4] FAN S., WANG P., WEN C., A new sensorless control strategy used in direct-drive PMSG wind power system, 2nd IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG), 2010, 611–615.
• [5] GAJEWSKI P., PIEŃKOWSKI K., Control of a Variable Speed Wind Turbine System with PMSG Generator, Maszyny Elektryczne – Zeszyty Problemowe, 3/2015 (107), 75–90.
• [6] MOUSSA M.F., GABER M., ATTAR El., Vector control drive of permanent magnet motor without a shaft encoder, 12th International Middle-East Power System Conference, 2008. MEPCON 2008, 249–254.
• [7] QIAO W., YANG X., GONG X., Wind Speed and Rotor Position Sensorless Control for Direct-Drive PMSG Wind Turbines, IEEE Transactions on Industrial Applications, 2012, 48, 1, 3–11.
• [8] RIZO M., RODRÍGUEZ A., BUENO F., RODRÍGUEZ J., Robustness analysis of Wind Turbines based on PMSG with sensorless vector control, IEEE Industrial Electronics 36th Annual Conference Society, IECON 2010, 3103–3108.
• [9] SILVA C., ASHER M., SUMMER M., Hybrid rotor position observer for wide speed-range sensorless PM motor drives including zero speed, IEEE Transactions on Industrial Electronics, 2006, 53, 373–378.
• [10] WU B., LANG Y., ZARGARI N., KOURO S., Power Conversion and Control of Wind Energy, John Wiley & Sons, Inc., 2011.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).