Wear Processes of Abrasion-Resistant Materials in Soil Environments of Varying pH

• Autorzy: Napiórkowski Jerzy , Ligier Krzysztof , Lemecha Magdalena

Identyfikatory

DOI

10.12913/22998624/166508

• Języki publikacji: EN

Abstrakty

EN

The paper evaluates the effect of the value of the negative logarithm of the hydrogen ion concentration in solution, denoted as pH, on the wear of materials used for elements working in the soil mass. Three types of materials with different chemical composition and manufacturing technology were analyzed. The study was carried out under laboratory conditions using the "spinning bowl" method. Low-alloy martensitic steel, boron-containing wear-resistant steel, and Fe-Cr-Mn-containing surfacing applied to martensitic steel were tested. Soil pH was found to have a significant effect on the wear pattern of the materials tested. The greatest wear was found in acidic soils with a pH lower than 5, and it was 30-40% greater, depending on the type of material, with respect to soil with a pH above 6.8. The greatest destructive effect was found for low-alloy martensitic steel containing "promoters" of hydrogen penetration. The ways in which the surface is used depending on the pH of the treated soil are described. Hydrogen wear is revealed by decohesion due to weakening of the structural bond of the material. The stages of the process of destructive hydrogen action are defined.

Słowa kluczowe

EN

wear of steel; welded layers; wear testing; martensitic steels; hydrogen wear; abrasive wear

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2023
• Tom: Vol. 17, no 3
• Strony: 269--279
• Opis fizyczny: Bibliogr. 20 poz., fig., tab.

Twórcy

autor

Napiórkowski Jerzy

• The Faculty of Technical Sciences, The University of Warmia And Mazury in Olsztyn, M. Oczapowskiego 11, 10-719 Olsztyn. Poland

• https://orcid.org/0000-0003-2953-7402

autor

Ligier Krzysztof

• The Faculty of Technical Sciences, The University of Warmia And Mazury in Olsztyn, M. Oczapowskiego 11, 10-719 Olsztyn. Poland

autor

Lemecha Magdalena

• The Faculty of Technical Sciences, The University of Warmia And Mazury in Olsztyn, M. Oczapowskiego 11, 10-719 Olsztyn. Poland

Bibliografia

• 1. Dong, C.F., Liu, Z.Y., Li, X.G., Cheng, Y.F. (2009). Effects of hydrogen-charging on the susceptibility of X100 pipeline steel to hydrogen-induced cracking. International journal of hydrogen energy, 34(24), 9879-9884.
• 2. Ghosh, G., Rostron, P., Garg, R., Panday, A. (2018). Hydrogen induced cracking of pipeline and pres- sure vessel steels: A review. Engineering Fracture Mechanics, 199, 609-618.
• 3. Hirth, J.P. (1980). Effects of hydrogen on the properties of iron and steel. Metallurgical Transactions A, 11(6), 861-890.
• 4. Kostencki, P., Stawicki, T., Królicka, A. (2021). Wear of the working parts of agricultural tools in the context of the mass of chemical elements introduced into soil during its cultivation. International Soil and Water Conservation Research, 9(2), 229-240.
• 5. Królicka, A., Szczepański, Ł., Konat, Ł., Stawicki, T., Kostencki, P. (2020). The influence of microstructure on abrasive wear micro-mechanisms of the claddings produced by welding used in agricultural soil. Materials, 13(8), 1920.
• 6. Lemecha, M., Napiórkowski, J., Konat, Ł. (2017). Analysis of wear and tear of working elements with a replaceable cutting edge in an abrasive soil mass. Tribologia.
• 7. Li, X., Liu, J., Sun, J., Lin, X., Li, C., & Cao, N. (2019). Effect of microstructural aspects in the heat- affected zone of high strength pipeline steels on the stress corrosion cracking mechanism: Part I. In acidic soil environment. Corrosion Science, 160, 108167.
• 8. Ligier, K., Napiórkowski, J., & Lemecha, M. (2020). Effect of Abrasive Soil Mass Grain Size on the Steel Wear Process. Tribology in Industry, 42(2).
• 9. Louthan Jr M.R., in: I.M. Bernstein, A.W. Thompson (Eds.), Hydrogen in Metals, ASM, Metals Park, OH, 1974, p. 53.
• 10. Mendez, P. F., Barnes, N., Bell, K., Borle, S. D., Gajapathi, S. S., Guest, S. D., & Wood, G. (2014). Welding processes for wear resistant overlays. Journal of Manufacturing Processes, 16(1), 4-25.
• 11. Napiórkowski, J., & Lemecha, M. (2018). The Effect of Abrasive Soil Mass Density on the Tribological Properties of Steel. Tribologia.
• 12. Natsis, A., Petropoulos, G., & Pandazaras, C. (2008). Influence of local soil conditions on mouldboard ploughshare abrasive wear. Tribology International, 41(3), 151-157.
• 13. Oriani, R. A. (1978). Hydrogen embrittlement of steels. Anual review of materials science, 8(1), 327-357.
• 14. Sergeev, N.N., Sergeev, A.N., Kutepov, S.N., Kolmakov, A.G., Gvozdev, A.E. (2019). Mechanism of the hydrogen cracking of metals and alloys, part I. Inorganic Materials: Applied Research, 10(1), 24-31.
• 15. Sörensen, S.P.L. (1909). Ergänzung zu der Abhandlung: Enzymstudien II: Über die Messung und die Bedeutung der Wasserstoffionenkonzentration bei enzymatischen Prozessen. Biochem. Z., 22, 352-356.
• 16. Stabryła, J. (2007). Research on the degradation process of agricultural tools in soil. Problemy Eksploatacji, 223-232.
• 17. Tiwari, G.P., Bose, A., Chakravartty, J.K., Wadekar, S.L., Totlani, M.K., Arya, R.N., Fotedar, R.K.(2000). A study of internal hydrogen embrittlement of steels. Materials Science and Engineering: A, 286(2), 269-281.
• 18. Troiano, A.R. (1960). The role of hydrogen and other interstitials in the mechanical behavior of metals. trans. ASM, 52, 54-80.
• 19. Wang, Q., & Li, X. (2010). Effects of Nb, V, and W on microstructure and abrasion resistance of Fe- Cr-C hardfacing alloys. Welding Journal, 89(6), 133-139.
• 20. Wang, Z., Xie, F., Wang, D., & Liu, J. (2021). Effect of applied potential on stress corrosion cracking behavior of X80 steel in alkaline soil simulated solution with sulfate-reducing bacteria. Engineering Failure Analysis, 121, 105109.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).