Comparison of classification ability indices of parameters characterizing the stereometric features of technical surfaces

• Autorzy: Rozanski R.

Identyfikatory

DOI

10.5604/01.3001.0012.4620

• Języki publikacji: EN

Abstrakty

EN

The study examined the relationship between the values of two indices evaluating the classification capacity of parameters characterizing the stereometric features of technical surfaces. The values of 83 3D parameters characterizing the stereometric features for 22 surfaces created in various machining processes were taken into account. The examined surfaces differ significantly in the stereometric characteristics of the surface with the similar value of the St parameter. The variance and the geometric mean of ordered parameter values differences were used as the indices of parameters classification ability. In particular, the existence, type and strength of relationship between the adopted indices were evaluated, and the model of the relationship between the indices was determined using the least-squares method. A comparison of the results obtained with those obtained from the analogous evaluation for 8 types of theoretical distributions of parameter values was also carried out.

Słowa kluczowe

EN

surface geometric structure; parameter classification ability

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2018
• Tom: Vol. 18, No. 3
• Strony: 98--106
• Opis fizyczny: Bibliogr. 17 poz., rys., tab.

Twórcy

autor

Rozanski R.

• The Jacob of Paradyż University of Applied Sciences in Gorzów Wielkopolski, Technical Department, Gorzów Wielkopolski, Poland

Bibliografia

• [1] WHITEHOUSE D.J., 1994, Handbook of Surface and Nanometrology, Institute of Physics Publishing Bristol in Philadelphia.
• [2] GÓRECKA R., POLAŃSKI Z., 1983, Metrology of the surface layer, Wydawnictwa Naukowo-Techniczne, Warszawa, (in Polish).
• [3] TOMKOWSKI R., KACALAK W., LIPIŃSKI D., 2012, Evaluation of the surface topography after precision machining, Journal of Machine Engineering, 12/4, 71-79.
• [4] KACALAK W., RYPINA Ł., TANDECKA K., 2015, Modelling and analysis of displacement of materials characterized by different properties in the zone of microcutting, Journal of Machine Engineering, 15/4, 59-68.
• [5] KACALAK W., LIPIŃSKI D., TOMKOWSKI R., 2008, Foundations of qualitative evaluation of the state of surfaces shaped with use of the theory of fuzzy sets, Wydawnictwo PAK, 54/4, 180-183, (in Polish).
• [6] POLJACEK S.M., RISOVIC D., FURIC K., GOJO M., 2008, Comparison of fractal and profilometric methods for surface topography characterization, Applied Surface Science, 254/208, 3449-3458.
• [7] RUSS J.C., 1994, Fractal Surfaces, Springer, New York.
• [8] KACALAK W., SZAFRANIEC F., TOMKOWSKI R., LIPIŃSKI D., ŁUKIANOWICZ C., 2011, Methodology for evaluation of classification abilities of parameters characterizing stereometry features of surface irregularities, Wydawnictwo PAK, 57/5, 542-546, (in Polish).
• [9] RAO C.R., 1973, Linear statistical inference and its application, John Wiley and Sons, New York.
• [10] KACALAK, W., RÓŻAŃSKI, R., LIPIŃSKI, D., 2016, Evaluation of classification ability of the parameters characterizing stereometric properties of technical surfaces, Journal of Machine Engineering, 16/2, 86-94.
• [11] PAWLUS P., 2005, Surface topography. Measurement, Analysis, Impact, Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszów, (in Polish).
• [12] WIECZOROWSKI M., 2013, Surface roughness metrology - methods and systems, ZAPOL, Szczecin, (in Polish).
• [13] BERNAT A., KACALAK W., 2005, The problems of determining of the parameters of stereometric structure of abrasive tool surface with use of 2D optical images, MRB 2005, International Journal for theoretical and applied mechanics, 12, 165-172.
• [14] KACALAK W., TANDECKA K., MATHIA T.G., 2016, A method and new parameters for assessing the active surface topography of diamond abrasive films, Journal of Machine Engineering, 16/4, 95-108.
• [15] MARSHALL A.W., OLKIN I., 1979, Inequalities: Theory of Majorization and Its Application, Academic Press., New York.
• [16] KACALAK, W., RÓŻAŃSKI, R., Selected aspects of evaluation method ability of technical objects parameters characterising stereometric features classification, (in print), Wydawnictwo AJP, (in Polish).
• [17] RÓŻAŃSKI R., Parameters useful in stereometric features of technical surface differentiation, (in print), Wydawnictwo AJP, (in Polish).