Hazards evaluation of workers on the example of 'Noteć' Iron Foundry in Pakość

• Autorzy: Sadowski J. , Szykowny T. , Ciechacki K.
• Języki publikacji: EN

Abstrakty

EN

One of the possibilities of work quality and productivity improvement in foundries, and at the same time, the increase of the performed casting quality, is the improvement and removing of dangers which occur at the work stations. The dangers result in the specified functional and health effects as for the workers. In the article, one based on the performed research, one finds the dangers estimation, dangers which occur at various work stations of 'Noteć' iron foundry in Pakość in the period 2002÷2005, and one finds the directions of their elimination or, at least, their minimalization. The aim of the article is to make the owners of similar casting institutes aware of the fact that it is very irresponsible and dangerous not to comply with the regulations, and the fact that owing to this they make harm to their workers and their families.

Słowa kluczowe

EN

hazards evaluation; dangers at foundry; dangers minimalization

PL

ocena zagrożeń; zagrożenia w odlewni; minimalizacja zagrożeń

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 1 spec.
• Strony: 17--22
• Opis fizyczny: Bibliogr. 17 poz., tab.

Twórcy

autor

Sadowski J.

• Applied Mechanics Institute, Mechanical Engineering Department, University of Technology and Life Sciences, 7 Kaliskiego street, 85–789 Bydgoszcz

autor

Szykowny T.

• Materials Engineering Institute, Mechanical Engineering Department, University of Technology and Life Sciences, 7 Kaliskiego street, 85–789 Bydgoszcz

autor

Ciechacki K.

• Materials Engineering Institute, Mechanical Engineering Department, University of Technology and Life Sciences, 7 Kaliskiego street, 85–789 Bydgoszcz

Bibliografia

• [1] B. Rączkowski: Workplace Safety in Practise Personnel Counsalting and Improvement Centre. Gdańsk, 2003.
• [2] J. Rączka, A. Tabor: Founding, AGH textbook, Kraków, 1997.
• [3] Z. Engel: Environment Protection against Vibrations and Noise. PWN Polish Scientific Publishers, Warsaw, 2003.
• [4] R. Kozela: Safe Foundry. Certificate No., p. 34, 2002.
• [5] A. Welkens: ABW-ecological Technology of Core Production. Founding – Science and Practice, No 3, p.72, 2005.
• [6] M. Holtzer, J. Kargulewicz: Disease Hazards among Foundry Workers, Founding Review No 15/1999 p.194.
• [7] M. Holtzer, B. Grafowska: Environment Protection and Work Safety in Founding, Founding Review, No 22, p. 62, 2000.
• [8] M. Pawalczyk-Łuszczyńska: Vibroacustic Hazards of Work Environment – Exposition Evaluation Basics]. Institute of Physical Hazards, Łódź, 2005.
• [9] A. Wolska: Ability of Vision and Lighting], Science and Practice N 11/1999, p.15.
• [10] J. Sadowski, T. Szykowny: „Minimalization of noise In foundries on The example of The iron foundry in Bydgoszcz”, Archives of Foundry PAN, Katowice 2005, No17, p.253.
• [11] L. Nowak, M. Holtzer: Workplace Safety in Founding. Materials of III International Conference – Modern Founding Technologies, Kraków, p.175, 2000.
• [12] J. Giergiel: Noise and Vibrations in Founding Industry, Part.I Basic Problems. AGH Scientific Notebooks, Kraków N. 1301, 1992.
• [13] J. Giergiel: Noise and Vibrations in Founding Industry. Part.II Possibilities of Noise and Vibration Reduction of the Selected Machines. AGH Scientific Notebooks, Kraków No 1302, 1992.
• [14] T. Szopa: Risk Analisis Methods as for Noise Level Evaluation. Materials of IV Scientific and Technical Conference, „Noise, Prevention, Health”, Kołobrzeg, p.13, 2000.
• [15] PN-N-18002. Management Systems of Work Safety and Hygiene. General Directives for Occupational Risk Evaluation.
• [16] New Provisions of an Act on Environment Protection (Certificate source – Work Protection N5/2005 p.7).
• [17] Z. Szpil: Modern Local Guy-Wires for Grinders and Baths. Certificate No 5, p.55, 2005.