PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The influence of chemical composition of nanofluids on dimensional changes of hardened constructional steel

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Purpose: The possibility definition of utilization of the quenching from the nanofluids group is to the hardened of elements created from constructional steels. The definition of influence size of nanofluids on the dimension changes of the element created from low carbon constructional steel is also the important aspect of this work. Design/methodology/approach: Methodology used during investigations enclosed two areas. First area enclosed the investigation of quenching mediums propriety in the support about the English method, which permitted estimate of their warmth receipt ability in the support about cooling curved in the arrangement the temperature – the time or the cooling speed. Second area enclosed the investigations of the hardened element which let define dimension changes and hardness on the transverse section. The formed structure was also estimated on the cross section in the support about the light microscope. Findings: of this article is show the possibility obtainment of minimum dimension changes the element of the cooled in nanofluids near the retained of hardness and structure on the level which was got in the quenching mediums until now used for the studied material. The summery up the use of quenching mediums of the nanofluids group at the base of distilled water, ammoniac water and Al2O3 nanoparticles causes decrease of dimension changes near keep on the same of hardness of hardened elements from constructional steel. Research limitations/implications: Research limitations result from the quantity of the quenching mediums used in the investigations which one can use as the point of the reference for nanofluids. This arose from initial investigations over this aspect, which is the dimension change of elements. It should also use real the parts of machines or tool in farther investigations. Practical implications: of results presented in this article, we will get in the range of the construction projecting of steel elements, where should consider technological surpluses for this element and material proprieties which has to which meet. For full utilization in the practice, however you should conduct additional investigations still both in the laboratory scale, how and industrial. Originality/value: Originality of this article is the performance of the influence of quenching mediums from the group nanofluids on the dimension changes of hardened steel elements.
Rocznik
Strony
5--11
Opis fizyczny
Bibliogr. 16 poz., rys., tab.
Twórcy
autor
  • Division of Metal Science and Surface Engineering, Institute of Materials Engineering, Poznan University of Technology, ul. Jana Pawła II 24, 61-139 Poznań, Poland
Bibliografia
  • [1] K. Kurzydłowski, M. Lewandowska, The Engineering, Constructional and Functional Nanomaterials, PWN, Warszawa, 2010 (in Polish).
  • [2] R. Brydson, M.R.J. Gibbs, M. Grell et all., Nanotechnology, PWN, Warszawa, 2009 (in Polish).
  • [3] L. Cademartiri, A.G. Ozin, Nanochemistry – Basic conceptions, PWN, Warszawa, 2011 (in Polish).
  • [4] R.A. Bhogare, B.S. Kothawale, A review on applications and challenges of Nano-fluids as collant in Automobile Radiator, International Journal of Scientific and Research Publications 3/8 (2013) 1-11.
  • [5] S.K. Nayak, P.Ch. Mishra, S.K.S. Parashar, Enhancement of heat transfer by water-Al2O3 and water-TiO2 nanofluids jet impingment in cooling hot steel surface, Journal of Experimental Nanoscience 11/16 (2016) 1253-1273, doi: 10.1080/17458080.2016.1209789.
  • [6] H. Kim, G. DeWitt, T. McKrell, J. Buongiorno, L. Hu, On the quenching of steel and zircaloy spheres in water-based nanofluids with alumina, silica and diamond nanoparticles, International Journal of Multiphase Flow 35/5 (2009) 427-438, doi: https://doi.org/10.1016/j.ijmultiphaseflow.2009.02.004.
  • [7] A. M. Tiara, S. Chakraborty, I. Sarkar, S.K. Pal, Effect of alumina nanofluid jet on the enhancement of heat transfer from a steel plate, Heat and Mass Transfer 53/6 (2017) 2187-2197, doi: 10.1007/s00231-016-1955-6.
  • [8] N.K. Prabhu, P. Fernades, Nanoquenchants for Industrial Heat Treatment, Journal of Materials Engineering and Performance 17/1 (2008) 101-103, doi: https://doi.org/10.1007/s11665-007-9124-1.
  • [9] G. Ramesh, K.N. Prabhu, Development of clay based nanofluids for quenching, Quenching Control and Distortion, Proceedings of the 6th International Quenching and Control of Distortion Conference, Including the 4th International Distortion Engineering Conference, 2012, 308-318.
  • [10] G. Ramesh, K.N. Prabhu, Review of thermo-physical properties, wetting and heat transfer charactheristics of nanofluids and their applicability in industrial quench heat treatment, Nanoscale Research Letters 6 (2011) 1-15, doi: 10.1186/1556-276X-6-334.
  • [11] I.M. Mahbubul, T.H. Chong, S.S. Khaleduzzaman, I.M. Shahrul, R. Saidur, B.D. Long, M.A. Amalina, Effect of ultrasonication duration on colloidal structure and viscosity of alumina-water nanofluid, Industrial and Engineering Chemistry Research 53/16 (2014) 6677-6684, doi: 10.1021/ie500705j.
  • [12] P. Changwei, J. Jung-Yeul, L. Jae Won, K. Yong Tae, Thermal conductivity measurement of methanol-based nanofluids with Al2O3 and SiO2 nanoparticles, International Journal of Heat and Mass Transfer 55/21-22 (2012) 5597-5602, doi: https://doi.org/10.1016/j.ijheatmasstransfer.2012.05.048.
  • [13] P. Changwei, J. Jung-Yeul, K. Yong Tae, Thermal conductivity enhancement of Al2O3 nanofluids based on the mixtures of aqueous NaCl solution and CH3OH, International Journal of Heat and Mass Transfer 56/1-2 (2013) 94-100, doi: https://doi.org/10.1016/j.ijheatmasstransfer.2012.09.031.
  • [14] I. Felde, T. Reti, X.L. Chen, Efficient Data Encoding and Filtering for Quenching Analysis, proceedings of the 3rd International Conference on Quenching and Control of Distortion ASM, Praga, 1999, 208-215.
  • [15] PN-EN 10083-1:2008 – the polish version: Steels to toughening – The part 1: General conditions technical deliveries (in Polish).
  • [16] PN-EN ISO 6507-1:2007: The metals – The hardness measurement of the Vickers method - The part 1: The investigations method (in Polish).
Uwagi
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-a4ef257d-63a8-4648-8540-8fda90a1f63f
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.