PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Modification of Surface Morphology and Surface Properties of Copper-Nickel Alloy by Anodic Treatment in a Deep Eutectic Solvent (Ethaline)

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
A deep eutectic solvent, ethaline (as a typical representative of new-generation room temperature ionic liquids), was used to anodically treat the surface of copper-nickel alloy (55 wt.% Cu). Anodic treatment in ethaline allows flexibly affecting the patterns of surface morphology: formation of stellated crystallites and surface smoothing (i.e. electropolishing) are observed depending on the applied electrode potential. The measured values of roughness coefficient (Ra) well correlate with the changes in surface morphology. Anodic treatment of Cu-Ni alloy in ethaline contributes to a considerable increase in the electrocatalytic activity towards the hydrogen evolution reaction in an alkaline aqueous medium, which can be used to develop new high-efficient and inexpensive electrocatalysts within the framework of the concept of carbon-free hydrogen economy.
Twórcy
  • Ukrainian State University of Chemical Technology, Department of Physical Chemistry, Gagarin Ave., 8, Dnipro, 49005, Ukraine
  • Ukrainian State University of Chemical Technology, Department of Physical Chemistry, Gagarin Ave., 8, Dnipro, 49005, Ukraine
  • Ukrainian State University of Chemical Technology, Department of Physical Chemistry, Gagarin Ave., 8, Dnipro, 49005, Ukraine
  • Ukrainian State University of Chemical Technology, Department of Physical Chemistry, Gagarin Ave., 8, Dnipro, 49005, Ukraine
  • Karpenko Physico-Mechanical Institute of the NAS of Ukraine, Naukova St. 5, Lviv, 79060, Ukraine
  • Ukrainian State University of Chemical Technology, Department of Physical Chemistry, Gagarin Ave., 8, Dnipro, 49005, Ukraine
Bibliografia
  • [1] M.P. Martínez-Viademonte, S.T. Abrahami, T. Hack, M. Burchardt, H. Terryn, Coatings 10, 1106 (2020). DOI: https://doi.org/10.3390/coatings10111106
  • [2] S. Moon, J. Korean Inst. Surf. Eng. 51, 1-10 (2018). DOI: https://doi.org/10.5695/JKISE.2018.51.1.1
  • [3] A.C. Alves, F. Wenger, P. Ponthiaux, J.-P. Celis, A.M. Pinto, L.A. Rocha, J.C.S. Fernandes, Electrochim. Acta 234, 16-27 (2017). DOI: https://doi.org/10.1016/j.electacta.2017.03.011
  • [4] K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, W. Bremser, ChemElectroChem 8, 2155-2168 (2021). DOI: https://doi.org/10.1002/celc.202100216
  • [5] O. Lebedeva, D. Kultin, A. Zakharov, L. Kustov, Metals 11, 959 (2021). DOI: https://doi.org/10.3390/met11060959
  • [6] D. Landolt, P.-F. Chauvy, O. Zinger, Electrochim. Acta 48, 3185-3201 (2003). DOI: https://doi.org/10.1016/S0013-4686(03)00368-2
  • [7] K. Juodkazis, J. Juodkazytė, R. Vilkauskaitė, V. Jasulaitienė, J. Solid State Electrochem. 12, 1469-1479 (2008). DOI: https://doi.org/10.1007/s10008-007-0484-0
  • [8] A. Renjith, A. Roy, V. Lakshminarayanan, J. Colloid Interface Sci. 426, 270-279 (2014). DOI: https://doi.org/10.1016/j.jcis.2014.04.015
  • [9] C. Yang, Q.B. Zhang, M.Y. Gao, Y.X. Hua, C.Y. Xu, J. Electrochem. Soc. 163, D469-D475 (2016). DOI: https://doi.org/10.1149/2.0461609jes
  • [10] L.I.N. Tomé, V. Baião, W. da Silva, C.M.A. Brett, Appl. Mater. Today 10, 30-50 (2018). DOI: https://doi.org/10.1016/j.apmt.2017.11.005
  • [11] E.L. Smith, A.P. Abbott, K.S. Ryder, Chem. Rev. 114, 11060-11082 (2014). DOI: https://doi.org/10.1021/cr300162p
  • [12] Q. Zhang, K.D.O. Vigier, S. Royer, F. Jérôme, Deep eutectic solvents: syntheses, properties and applications, Chem. Soc. Rev. 41, 7108-7146 (2012). DOI: https://doi.org/10.1039/c2cs35178a
  • [13] B.B. Hansen, S. Spittle, B. Chen, D. Poe, Y. Zhang, J.M. Klein, A. Horton, L. Adhikari, T. Zelovich, B.W. Doherty, B. Gurkan, E.J. Maginn, A. Ragauskas, M. Dadmun, T.A. Zawodzinski, G.A. Baker, M.E. Tuckerman, R.F. Savinell, J.R. Sangoro, Chem. Rev. 121, 1232-1285 (2021). DOI: https://doi.org/10.1021/acs.chemrev.0c00385
  • [14] E.L. Smith, Trans. Inst. Met. Finish. 91, 241-248 (2013). DOI: https://doi.org/10.1179/0020296713Z.000000000120
  • [15] A. Kityk, M. Hnatko, V. Pavlik, M. Boča, Mater. Res. Bull. 141, 111348 (2021). DOI: https://doi.org/10.1016/j.materresbull.2021.111348
  • [16] K. Alrbaey, D.I. Wimpenny, A.A. Al-Barzinjy, A. Moroz, J. Mater. Eng. Perform. 25, 2836-2846 (2016). DOI: https://doi.org/10.1007/s11665-016-2140-2
  • [17] A.P. Abbott, G. Capper, K.J. McKenzie, A. Glidle, K.S. Ryder, Phys. Chem. Chem. Phys. 8, 4214-4221 (2006). DOI: https://doi.org/10.1039/b607763n
  • [18] A.J. Goddard, R.C. Harris, S. Saleem, M. Azam, C. Hood, D. Clark, J. Satchwell, K.S. Ryder, Trans. Inst. Met. Finish. 95, 137-146 (2017). DOI: https://doi.org/10.1080/00202967.2016.1270616
  • [19] W.O. Karim, A.P. Abbott, S. Cihangir, K.S. Ryder, Trans. Inst. Met. Finish. 96, 200-205 (2018). DOI: https://doi.org/10.1080/00202967.2018.1470400
  • [20] V.S. Protsenko, T.E. Butyrina, L.S. Bobrova, S.A. Korniy, F.I. Danilov, Mater. Lett. 270, 127719 (2020). DOI: https://doi.org/10.1016/j.matlet.2020.127719
  • [21] T.M. Abdel-Fattah, J.D. Loftis, Molecules 25, 5712 (2020). DOI: https://doi.org/10.3390/molecules25235712
  • [22] A.A. Kityk, V.S. Protsenko, F.I. Danilov, O.V. Kun, S.A. Korniy, Surf. Coat. Technol. 375, 143-149 (2019). DOI: https://doi.org/10.1016/j.surfcoat.2019.07.018
  • [23] W.O. Karim, J.A. Juma, K.M. Omer, Y.M. Salih, K.H.H. Aziz, S.B. Aziz, Electrochemistry 88, 1-4 (2020). DOI: https://doi.org/10.5796/electrochemistry.20-00038
  • [24] A. Kityk, V. Protsenko, F. Danilov, V. Pavlik, M. Hnatko, J. Šoltýs, Colloids Surf. A 613, 126125 (2021). DOI: https://doi.org/10.1016/j.colsurfa.2020.126125
  • [25] A.A. Kityk, F.I. Danilov, V.S. Protsenko, V. Pavlik, M. Boča, Y. Halahovets, Surf. Coat. Technol. 397, 126060 (2020). DOI: https://doi.org/10.1016/j.surfcoat.2020.126060
  • [26] R. Dehdari Vais, H. Yadegari, N. Sattarahmady, H. Heli, J. Electroanal. Chem. 815, 134-142 (2018). DOI: https://doi.org/10.1016/j.jelechem.2018.03.017
  • [27] C. Yang, Q.B. Zhang, M.Y. Gao, Y.X. Hua, C.Y. Xu, J. Electrochem. Soc., 163, D469-D475 (2016). DOI: https://doi.org/10.1149/2.0461609jes
  • [28] A.P. Abbott, G. Frisch, J. Hartley, W.O. Karim, K.S. Ryder, Prog. Nat. Sci. Mater. Int. 25, 595-602 (2015). DOI: https://doi.org/10.1016/j.pnsc.2015.11.005
  • [29] W.O. Karim, J.A. Juma, K.M. Omer, K.H. Hama Aziz, Y.M. Salah, S.B. Aziz, Electrochemistry 89, 71-74 (2021). DOI: https://doi.org/10.5796/electrochemistry.20-00129
  • [30] W.O. Karim, S.B. Aziz, M.A. Brza, R.M. Abdullah, M.F.Z. Kadir, Appl. Sci. 9, 4401 (2019). DOI: https://doi.org/10.3390/app9204401
  • [31] A.P. Abbott, G. Frisch, S.J. Gurman, A.R. Hillman, J. Hartley, F. Holyoak, K.S. Ryder, Chem. Commun. 47, 10031-10033 (2011). DOI: https://doi.org/10.1039/c1cc13616j
  • [32] Q.B. Zhang, Y.X. Hua, Phys. Chem. Chem. Phys. 16, 27088-27095 (2014). DOI: https://doi.org/10.1039/c4cp03041a
  • [33] C. Yang, Q.B. Zhang, A.P. Abbott, Electrochem. Commun. 70, 60-64 (2016). DOI: https://doi.org/10.1016/j.elecom.2016.07.004
  • [34] J.O’M. Bocris, B.T. Rubin, A. Despic, B. Lovrecek, Electrochim. Acta 17, 973-999 (1972). DOI: https://doi.org/10.1016/0013-4686(72)90017-5
  • [35] K.M. Ismail, A.M. Fathi, W.A. Badawy, Corros. Sci. 48, 1912-1925 (2006). DOI: https://doi.org/10.1016/j.corsci.2005.07.004
  • [36] J.K. Chang, S.H. Hsu, I.W. Sun, W.T. Tsai, J. Phys. Chem. C 112, 1371-1376 (2008). DOI: https://doi.org/10.1021/jp0772474
  • [37] F.K. Crundwell, Electrochim. Acta 36, 2135-2141 (1991). DOI: https://doi.org/10.1016/0013-4686(91)85221-R
  • [38] D. Landolt, Electrochim. Acta 32, 1-11 (1987). DOI: https://doi.org/10.1016/0013-4686(87)87001-9
  • [39] D. Landolt, P.-F. Chauvy, O. Zinger, Electrochim. Acta 48, 3185-3201 (2003). DOI: https://doi.org/10.1016/S0013-4686(03)00368-2
Uwagi
This work was supported by the Ministry of Education and Science of Ukraine (project no. 0121U109551).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-a47c6938-1fc0-4a65-81dd-f7c0b321a99c
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.