Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Industrial pipelines are used as a low-cost method of transport of various types of substances. In the last decades the number of transmission and distribution pipelines increased considerably, leading to an increased number of failures and rising the need for better and more accurate non-destructive methods of their detection and prevention. Leakage in pipeline networks causes a loss of valuable resources in the form of oil and gas. Repairing the infrastructure requires significant additional financial resources. Therefore, any damage to the pipeline network must be detected and repaired as soon as possible. Indirect methods for leak detection and localization uncover the presents of leaks from outside the pipeline by visual observation or by using appropriate equipment. Pipelines are often underground installations or run for many kilometers in areas where there are no roads, and access is extremely difficult or impossible. The underground occurrence of pipelines makes regular inspection difficult. It is also not possible to examine all pipeline sections simultaneously. Pipeline preventive maintenance or replacement program should be conducted based on detailed assessment of its technical and environmental conditions. Thus, safe and non-destructive techniques are needed, which would allow for pipeline periodical inspection without disturbing their operation.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
173--180
Opis fizyczny
Bibliogr. 6 poz.
Twórcy
autor
- AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Krakow, Poland
- AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Krakow, Poland
autor
- AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Krakow, Poland
autor
- AGH University of Science and Technology, Faculty of Mining Surveying and Environmental Engineering, Krakow, Poland
Bibliografia
- [1] Gruszczyński W., Matwij W., Ćwiąkała P.: Comparison of low-altitude UAV photogrammetry with terrestrial laser scanning as data-source methods for terrain covered in low vegetation. ISPRS Journal of Photogrammetry and Remote Sensing, vol. 126, 2017, pp. 168–179.
- [2] Lewińska P., Dyczko A.: Thermal digital terrain model of a coal spoil tip – a way of improving monitoring and early diagnostics of potential spontaneous combustion areas. Journal of Ecological Engineering, vol. 17, iss. 4, 2016, pp. 170–179.
- [3] Li Zh. Y., Huang F. Sh., Xu Y. X.: Introduction to seismic design of the fracture zone of the Ji ing pipeline project. Exchange of Science and Technology, vol. 10, 2006, pp. 69–71.
- [4] Ortyl Ł., Owerko T.: Pomiary inwentaryzacyjne sieci uzbrojenia terenu. In: Gocał J., Geodezja inżynieryjno-przemysłowa, Część 3. Wydawnictwa AGH, Kraków 2010, pp. 140–244.
- [5] Wróbel A., Wróbel A.: Determinants of thermal insulating properties of walls using thermographic metod. Geomatics and Environmental Engineering, vol. 4, no. 1/1, 2010, pp. 163–172.
- [6] Wróbel A., Wróbel A., Kisilewicz T., Ortyl Ł., Kwartnik-Pruc A., Szafarczyk A., Owerko T., Rakoczy A., Nowak K.: Ilościowe określanie cieplnych właściwości przegród budowlanych z wykorzystaniem techniki termograficznej. Wydawnictwa AGH, Kraków 2011.
Uwagi
EN
This work was supported by the Ministry of Science and Higher Education; statutory works AGH University of Science and Technology, Faculty of Drilling, Oil and Gas no. 11.11.190.555
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-a45cd130-f50c-4eec-803e-d8958cc99d76