Effect of Bismuth and Rare Earth Elements on Graphite Structure in Different Section Thicknesses of Spheroidal Graphite Cast Iron Castings

• Autorzy: Glavas Z. , Strkalj A. , Maldini K. , Kozina F.

Identyfikatory

DOI

10.24425/123846

• Języki publikacji: EN

Abstrakty

EN

Effects of additions of 0.00064, 0.001 and 0.0042 wt.% Bi on the graphite structure in the section thicknesses of 3, 12, 25, 38, 50, 75 and 100 mm of spheroidal graphite cast iron castings containing 2.11 wt.% Si and rare earth (RE) elements (Ce + La + Nd + Pr + Sm + Gd) in the range from 0.00297 to 0.00337 wt.% were analyzed in this paper. Addition of Bi was not necessary for obtaining high nodule count and nodularity higher than 80% in section thicknesses of 3, 12 and 25 mm. RE elements showed a beneficial effect on the nodule count and nodularity in these sections. Nodularity was below 80% in section thicknesses of 38, 50, 75 and 100 mm when Bi was not added. Detrimental effect of RE elements on graphite morphology in these sections was neutralized by adequate addition of Bi. Addition of 0.001 wt.% Bi (ratio of RE/Bi = 3.27) was enough to achieve nodularity above 80% in the section thickness of 38 mm. Nodularity was increased above 80% in section thicknesses of 50, 75 and 100 mm by addition of 0.0042 wt.% Bi (ratio of RE/Bi = 0.78). At the same time, Bi significantly increased the nodule count. Nodularity above 80% and the high nodule count in the section thicknesses of 75 and 100 mm were also achieved by using an external metallic chill in the mold. In this case, addition of Bi was not required.

Słowa kluczowe

EN

spheroidal graphite cast iron casting; graphite structure; bismuth; rare earth elements; microstructure

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 3
• Strony: 1547--1553
• Opis fizyczny: Bibliogr. 34 poz., rys., tab.

Twórcy

autor

Glavas Z.

• University of Zagreb, Faculty of Metallurgy, Aleja Narodnih Heroja 3, 44103 Sisak, Croatia

autor

Strkalj A.

• University of Zagreb, Faculty of Metallurgy, Aleja Narodnih Heroja 3, 44103 Sisak, Croatia

autor

Maldini K.

• Croatian Waters, Ulica Grada Vukovara 220, 10000 Zagreb, Croatia

autor

Kozina F.

• University of Zagreb, Faculty of Metallurgy, Aleja Narodnih Heroja 3, 44103 Sisak, Croatia

Bibliografia

• [1] S. Komatsu, T. Shiota, T. Matsuoka, K. Nakamura, AFS Trans.102, 121-125 (1994).
• [2] P. Ferro, P. Lazzarin, F. Berto, Mater. Sci. Eng. A 554, 122-128 (2012).
• [3] I. Riposan, M. Chisamera, A. Stan, Int. J. Metalcast. 7 (1), 9-20 (2013).
• [4] C. Labrecque, P.M. Cabanne, China Foundry 8 (1), 66-73 (2011).
• [5] S. Hasse, Giesserei-Prax. 15/16, 271-278 (1995).
• [6] I. Riposan, M. Chisamera, V. Uta, S. Stan, Int. J. Metalcast. 8 (2), 65-80 (2014).
• [7] I. Riposan, M. Chisamera, S. Stan, China Foundry 7 (2), 163-170 (2010).
• [8] M. I. Onsøien, Ø. Grong, T. Skaland, K. Jørgensen, Mater. Sci. Technol. 15 (3), 253-259 (1999).
• [9] J. O. Choi, J. Y. Kim, C. O. Choi, J. K. Kim, P. K. Rohatgi, Mater. Sci. Eng. A, 383, 323-333 (2004).
• [10] Z. Jiyang, China Foundry, 7 (2), 183-198 (2010).
• [11] P. Ferro, A. Fabrizi, R. Cervo, C. Carollo, J. Mater. Process. Technol. 213 (9), 1601-1608 (2013).
• [12] Z. Zhang, H. M. Flower, Y. Niu, Mater. Sci. Techol. 5 (7), 657-664 (1989).
• [13] H. Itofiji, H. Uchikawa, AFS Trans. 98, 429-448 (1990).
• [14] N. Yingyi, Z. Zhu, Foundryman 81 (8), 390-398 (1988).
• [15] R. Källbom, K. Hamberg, M. Wessén, L.E. Björkegren, Mater. Sci. Eng. A 413-414, 346-351 (2005).
• [16] H. Morrogh, AFS Trans. 60, 439-452 (1952).
• [17] G.S. Cole, AFS Trans. 80, 335-348 (1972).
• [18] J. Verelst, A. DeSy, Giesserei 43 (12), 305-315 (1956).
• [19] I. Aoki, T. Tottori, Iron Steel 43 (11), 1191-194 (1957).
• [20] H. Takeda, H. Yoneada, K. Asano, Mater. Trans. 51 (1), 176-185 (2010).
• [21] H. Takeda, K. Asano, H. Yoneada, Int. J. Cast Met. Res. 21 (1-4), 81-85 (2008).
• [22] H. Horie, T. Kowata, A. Chida, Cast Met. 2 (4), 197-202 (1990).
• [23] W. Shihe, X. Guoqing, D. Hanqiao, L. Hantong, in Proceedings of the fourth International Symposium on the physical metallurgy of cast iron, eds. G. Ohira, T. Kusakawa, E. Niyama, Tokyo, Japan, 119-124 (1989).
• [24] A. Javaid, C. R. Loper, Jr, AFS Trans. 103, 135-150 (1995).
• [25] E. N. Pan, C. Y. Chen, AFS Trans. 104, 845-858 (1996).
• [26] Z. Jiyang, China Foundry 7 (1), 76-88 (2010).
• [27] Z. Bofan, E. W. Langer, Scand. J. Metall. 13, 15-22 (1984).
• [28] M. N. Abdusalyamova, A. G. Chuiko, E. I. Shishkin, O. I. Rachmatov, J. Alloys Compd. 240, 272-277 (1996).
• [29] Z. Jiyang, W. Schmitz, S. Engler, AFS Trans. 98, 783-786 (1990).
• [30] B. Lux, Giessereiforschung 2, 65-80 (1970).
• [31] D. K. Banerjee, D. M. Stefanescu, AFS Trans. 99, 747-759 (1991).
• [32] Z. Jiyang, China Foundry, 7 (3), 292-307 (2010).
• [33] Z. Jiyang, China Foundry, 7 (4), 470-478 (2010).
• [34] ASTM E2567-14: Standard Test Method for Determining Nodularity and Nodule Count in Ductile Iron Using Image Analysis, ASTM International, USA, 1-4 (2014).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).