PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Analysis of the requirements for high speed preselection vehicle weigh-in-motion systems on the basis of completed public contracts

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Analiza wymagań dla szybkoprzejazdowych preselekcyjnych systemów ważenia pojazdów w ruchu na podstawie zrealizowanych zamówień publicznych
Języki publikacji
EN
Abstrakty
EN
The paper summarises selected requirements from public contracts, relating to WIM preselection systems in Poland. The difference between WIM and HS-WIM requirements is presented, and the differing requirements based on both international documentation and the standardised requirements that new or refurbished stations must meet are described
PL
W artykule zestawiono wybrane wymagania pochodzące z zamówień publicznych, dotyczących systemów ważenia preselekcyjnych WIM w Polsce. Przedstawiono różnicę pomiędzy wymaganiami WIM i HS-WIM oraz opisano zróżnicowane wymaganiazarównonapodstawiedokumentacji międzynarodowej jak i ujednolicone wymagania jakie muszą spełniać nowe lub remontowane stanowiska.
Rocznik
Strony
9--16
Opis fizyczny
Bibliogr. 9 poz., rys., wykr.
Twórcy
autor
  • Road and Bridge Research Institute, Division of Management Systems and Telematics, Instytutowa 1, 03-302 Warsaw, Poland
  • Road and Bridge Research Institute, Division of Management Systems and Telematics, Instytutowa 1, 03-302 Warsaw, Poland,
  • Road and Bridge Research Institute, Division of Management Systems and Telematics, Instytutowa 1, 03-302 Warsaw, Poland
Bibliografia
  • [1] Jacob, B., O'Brien, E., Jehaes, S. (2002). COST 323: Weigh-in-Motion of road vehicles– final report.
  • [2] OIML: OIML R 134-1: Automatic instruments for weighing road vehicles in motion and measuring axle loads Part 1: Metrological and technical requirements - Tests. 2006.
  • [3] American Society for Testing and Materials (ASTM), E1318 - 09: Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods, ASTM International, West Conshohocken, PA. 2017.
  • [4] Terms of Reference for the contract for the execution of construction works called: “Design and repair of the preselection weighing system In the course of the streets of the city of Białystok” with the designation ZDM-IV.271.8.2020.PR, Municipal Roads Authority, City of Białystok. 2020.
  • [5] Terms of Reference “Maintenance and adaptation of the pre-selection weigh-in-motion system, together with its calibration and verification test in accordance with Appendix No. 2 “Procedure for checking weigh-in-motion (WIM) stations in the course of national roads Nos. S-3, 10, and 11”, with the designation GDDKiA O.Sz.D-3.2413.19.2018, General Directorate for National Roads and Motorways, Szczecin. 2018.
  • [6] Janikowski, T. (2014). Traffic Data Collection System at the Traffic Management Centre in the city of Stryków. Data transfer instructions for users of the weigh-in-motion system. General Directorate of National Roads and Motorways Branch in Łódź.
  • [7] Technische Lieferbedingungen für Streckenstationen, Bundesanstalt für Straßenwesen (BASt) ,Bergisch Gladbach. 2012.
  • [8] “Test of the vehicle weigh-in-motion stations verifying the level of detection, identification and classification of vehicles” General Directorate of National Roads and Motorways Branch in Szczecin, 2018.
  • 9] Terms of Reference, Ongoing maintenance of preselection vehicle weigh-in-motion systems located within national roads administered by the General Directorate of National Roads and Motorways Bydgoszcz Branch, designated as GDDKIA.O.BY.D-3.2421.19.2022.26, GeneralDirectorate of National Roads and Motorways, Bydgoszcz, 2022.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa nr POPUL/SP/0154/2024/02 w ramach programu "Społeczna odpowiedzialność nauki II" - moduł: Popularyzacja nauki (2025).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-a44d20a1-89ae-4ca2-ae14-1198a2ef6d1f
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.