Powiadomienia systemowe
- Sesja wygasła!
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The Double Penetration Method (DPM) method of measuring ESPD (Electrosensitive Protective Device) response time was presented by Dzwiarek (1997). Calibrating the measuring equipment is a crucial stage of the procedure. Experimental verification of theoretical predictions is also crucial. For calibration purposes, a device simulating real ESPD operation thus enabling a correct setting of the response time was designed (Dźwiarek, 1997). Theoretical analysis has shown that measuring ESPD response time with the DPM is subject to localisation errors made in the localisation of the detection zone border, rod position measurement errors made during highspeed penetration, and time delay measurement errors. The values of all those components of the total error have been determined experimentally using the calibrating device. Measurements have been taken under conditions as close to real ones as possible proving that the total measurement error is really enclosed within the assumed limits.
Wydawca
Rocznik
Tom
Strony
363--384
Opis fizyczny
Bibliogr. 7 poz., rys., tab., wykr.
Twórcy
Bibliografia
- 1.Dźwiarek, M. (1995). Metoda pomiaru stochastycznie zmiennego czasu zadziałania bezdotykowych urządzeń ochronnych. [A method for response time measurement of Electrosensitive Protective Devices] (Project CIOP IV.24). Warsaw, Poland: Central Institute for Labour Protection.
- 2.Dźwiarek, M. (1997). A method for response time measurement of Electrosensitive Protective Devices. International Journal of Occupational Safety and Ergonomics, 2(3), 234-242.
- 3.Firkowicz S. (1970). Statystyczne badanie wyrobów [Statistical examination of products]. Warsaw, Poland: Wydawnictwa Naukowo-Techniczne.
- 4.International Organization for Standardization and International Electrotechnical Commission. (1997). General requirements for the technical competence of testing laboratories (Guide ISO/IEC 25). Geneva, Switzerland: Author.
- 5.Jaworski, J.M., Morawski, R.Z., & Olędzki, J.S. (1992). Wstęp do metrologii i teorii eksperymentu [Introduction to metrology and the theory of experiment], Warsaw, Poland: Wydawnictwa Naukowo-Techniczne.
- 6.Polski Komitet Normalizacyjny. (1995). Ogólne zasady działania laboratoriów badawczych [General criteria for the operation of testing laboratories] (Standard No. PN-EN 45001:1995). Warsaw, Poland: Wydawnictwa Normalizacyjne Alfa-Wero.
- 7.Rumszyski, L.Z. (1973). Matematyczne opracowanie wyników eksperymentu. [Mathematical analysis of experimental results]. Warsaw, Poland: Wydawnictwa Naukowo-Techniczne.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-a43a4975-d34b-460f-aa33-cfb34ec9da83