PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

A photovoltaic source I/U model suitable for hardware in the loop application

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This paper presents a novel, low-complexity method of simulating PV source characteristics suitable for real-time modeling and hardware implementation. The application of the suitable model of the PV source as well as the model of all the PV system components in a real-time hardware gives a safe, fast and low cost method of testing PV systems. The paper demonstrates the concept of the PV array model and the hardware implementation in FPGAs of the system which combines two PV arrays. The obtained results confirm that the proposed model is of low complexity and can be suitable for hardware in the loop (HIL) tests of the complex PV system control, with various arrays operating under different conditions.
Rocznik
Strony
773--786
Opis fizyczny
Bibliogr. 26 poz., rys., wz.
Twórcy
autor
  • AGH University of Science and Technology
autor
  • AGH University of Science and Technology
autor
  • AGH University of Science and Technology
  • AGH University of Science and Technology
Bibliografia
  • [1] Villalva M.G., Gazoli J.R., Filho E.R., Comprehensive Approach to Modeling and Simulation of Photovoltaic Arrays, IEEE Trans. on Power. Electron., vol. 24, pp. 1198-1208 (2009).
  • [2] Parera Ruiz A., Cirstea M., Koczara W., Teodorescu R., A novel integrated renewable energy system modelling approach, allowing fast FPGA controller prototyping, 2008 11th International Conference on Optimization of Electrical and Electronic Equipment, Brasov, pp. 395-400 (2008).
  • [3] Koutroulis E., Kalaitzakis K., Tzitzilonis V., Development of an FPGA-based System for Real-Time Simulation of Photovoltaic Modules, Seventeenth IEEE International Workshop on Rapid System Prototyping (RSP'06), Chania, Crete, pp. 200-208 (2006).
  • [4] Stala R., Testing of the grid-connected photovoltaic systems using FPGA-based real-time model, 13th Int. Power Electronics and Motion Control Conference, Poznan, Poland (2008).
  • [5] Stala R., Stawiarski L., Real-time models of PV arrays implemented in FPGAs, Przeglad Elektrotechniczny (in Polish), vol. 86, no. 2, pp. 358-363 (2010).
  • [6] Maffezzoni P., Codecasa L., D'Amore D., Modeling and Simulation of a Hybrid Photovoltaic Module Equipped With a Heat-Recovery System, IEEE Trans. on Ind. Elec., vol. 56, pp. 43114318 (2009).
  • [7] Vitorino M.A., Hartmann L.V., Lima A.M.N., Corrêa M.B.R., Using the model of the solar cell for determining the maximum power point of photovoltaic systems, 12th European Conference on Power Electronics and Applications EPE’07, CD Proceedings (2007).
  • [8] Böke U., A simple model of photovoltaic module electric characteristics, 12th European Conference on Power Electronics and Applications EPE’07, CD Proceedings (2007).
  • [9] Midtgard O.M., A simple photovoltaic simulator for testing of power electronics, 12th European Conference on Power Electronics and Applications EPE’07, CD Proceedings (2007).
  • [10] Raposa G., Testing Terrestrial Solar-powered Inverters Using Solar Array Simulation Techniques, Agilent Technologies, Inc. (2009).
  • [11] Ma J., Bi Z., Ting T.O., Hao S., Hao W., Comparative performance on photovoltaic model parameter identification via bio-inspired algorithms, Solar Energy, vol. 132, pp. 606-616 (2016).
  • [12] Lun S-x., Wang S., Yang G-h., Guo T-t., A new explicit double-diode modeling method based on Lambert W-function for photovoltaic arrays, Solar Energy, vol. 116, pp. 69-82 (2015).
  • [13] Park J-Y., Choi S-J., A novel datasheet-based parameter extraction method for a single-diode photovoltaic array model, Solar Energy, ISSN 0038092X, vol. 122, p. 12-35 (2015).
  • [14] Mahmoud Y., El-saadany E., Accuracy comparison between Gompertz and polynomial based PV models, Smart Energy Grid Engineering (SEGE), 2015 IEEE International Conference on, Oshawa, Canada, pp. 1-4. (2015), DOI: 10.1109/SEGE.2015.7324616.
  • [15] Dash S.K., Raj R.A., Nema S., Nema R.K., A quantitative and comparative performance evaluation of PV models on PSPICE platform, Circuit, Power and Computing Technologies (ICCPCT), 2015 International Conference on, Nagercoil, pp. 1-8 (2015), DOI: 10.1109/ICCPCT.2015.7159479.
  • [16] Shongwe S., Hanif M., Comparative Analysis of Different Single-Diode PV Modeling Methods, IEEE Journal of Photovoltaics, vol. 5, no. 3, pp. 938-946, (2015), DOI: 10.1109/JPHOTOV.2015.2395137.
  • [17] Stala R., Simulation method and system for simulation the current-voltage characteristics of the photovoltaic cell, Patent PL 222545 B1 (2016).
  • [18] Stala R., Simulation method and system for simulation the voltage-current characteristics of the photovoltaic cell, Patent PL 222546 B1 (2016).
  • [19] Szkolny S., Małyszko O., Hardware-in-the-loop simulator for testing wind turbine generators, Zeszyty Problemowe – Maszyny Elektryczne, vol. 3, no. 103, pp. 269-274 (2014).
  • [20] Szkolny S., Małyszko O., Hardware-in-the-loop simulator for testing wind turbine generators, Czasopismo Techniczne. Elektrotechnika – Technical Transactions. Electrical Engineering R. 112, vol. 1-E, no. 8, pp. 229-239 (2015).
  • [21] Baszyński M., Low cost, high accuracy real-time simulation used for rapid prototyping and testing control algorithms on example of BLDC motor, Archives of Electrical Engineering, ISSN (Online) 2300-2506, vol. 65, no. 3, pp. 463-479 (2016), DOI: 10.1515/aee-2016-0034.
  • [22] Baszyński M., A model of the single-phase multicell rectifier with sinusoidal source current using FPGA implementation, Przegląd Elektrotechniczny, vol. 85 no 10, pp. 76-82 (2009).
  • [23] Khalil S.S., Abu-Rub H., Smart Grid Condition Assessment: Concepts, Benefits, and Developments, Power Electronics and Drives 1, vol. 36, no. 2 (2016).
  • [24] Mariéthoz S., Morari M., Explicit Model-Predictive Control of a PWM Inverter with an LCL Filter, IEEE Trans. on Ind. Electron., vol. 56, no. 2, pp. 389-399 (2009).
  • [25] Mondzik A., Waradzyn Z., Stala R., Penczek A., High efficiency switched capacitor voltage doubler with planar core-based resonant choke, 2016 10th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), Bydgoszcz, pp. 402-409 (2016).
  • [26] Waradzyn Z., Stala R., Mondzik A., Pirog S., Switched Capacitor-Based Power Electronic Converter-Optimization of High Frequency Resonant Circuit Components, in Advanced Control of Electrical Drives and Power Electronic Converters, ser. Studies in Systems, Decision and Control, Springer International Publishing AG, pp. 361-378 (2017).
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-a41f6a5a-09a5-41fc-8d45-38941e9c7387
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.