Bead-on-plate welding on S235JR steel by underwater local dry chamber process

• Autorzy: Rogalski G. , Łabanowski J. , Fydrych D. , Tomków J.
• Języki publikacji: EN

Abstrakty

EN

The article presents the results of the effect of parameters of underwater local dry chamber welding on the properties of padding welds. The effect of heat input and the type of shielding gas on the structure and hardness of welds was established. the functions for estimating the maximum hardness of the heat affected zone have been also elaborated.

Słowa kluczowe

EN

maximum hardness of the heat affected zone; welding under water; dry chamber process

• Wydawca: Gdańsk University of Technology, Faculty of Ocean Engineering & Ship Technology
• Czasopismo: Polish Maritime Research
• Rocznik: 2014
• Tom: nr 2
• Strony: 58--64
• Opis fizyczny: Bibliogr. 17 poz., rys., tab.

Twórcy

autor

Rogalski G.

• Mechanical Faculty, Joining Engineering Department, Gdansk University of Technology, Narutowicza 11/12, 80-233 Gdansk, POLAND

autor

Łabanowski J.

• Mechanical Faculty, Joining Engineering Department, Gdansk University of Technology, Narutowicza 11/12, 80-233 Gdansk, POLAND

autor

Fydrych D.

• Mechanical Faculty, Joining Engineering Department, Gdansk University of Technology, Narutowicza 11/12, 80-233 Gdansk, POLAND

autor

Tomków J.

• Mechanical Faculty, Joining Engineering Department, Gdansk University of Technology, Narutowicza 11/12, 80-233 Gdansk, POLAND

Bibliografia

• 1. Łabanowski J., Fydrych D., Rogalski G.: Underwater Welding – a review. Advances in Materials Science, 3/2008
• 2. Fydrych D., Łabanowski J., Rogalski G.: Weldability of high strength steels in wet welding conditions. Polish Maritime Research, vol. 20 (2013), no. 2, pp. 67-73
• 3. Matsunawa A., Nishiguchi K., Okamoto I.: Prediction of cooling rate and hardness of base metal in the underwater welding by local cavity process. Proceedings of the International Conference „Underwater Welding”, Trondheim, Norway 1983
• 4. Łabanowski J., Fydrych D., Rogalski G., Samson K.: Underwater welding of duplex stainless steel. Diffusion and Defect Data Pt.B: Solid State Phenomena 183 (2012), pp. 101-106
• 5. Fydrych D., Rogalski G.: Effect of underwater local cavity welding method conditions on diffusible hydrogen content in deposited metal. Welding International Vol. 27 (2013), Issue 3, pp. 196-202
• 6. Santos V. R., Monteiro M. J., Rizzo F.C., Bracarense A. Q., Pessoa E. C. P., Marinho R. R. Vieira L. A.: Development of an oxyrutile electrode for wet welding. Welding Journal, vol. 91 (2012), no. 12, pp. 319-328
• 7. Ghadimi P., Ghassemi H., Ghassabzadeh M., Kiaei Z.: Threedimensional simulation of underwater welding and investigation of effective parameters. Welding Journal, vol. 92 (2013), no. 8, pp. 239-249
• 8. Pessoa E., Bracarense A., Zica E., Liu S., Perez-Guerrero F.: Porosity variation along multi-pass underwater wet welds and its influence on mechanical properties. Journal of Materials Processing Technology. Vol. 179 (2006), Issues 1-3, pp. 239-243
• 9. Liu D., Zhang H., Yang K., Tang D. Feng J.: Microstructure evolution of HAZ in the multi-pass underwater wet welded joints. China Welding (English Edition), vol. 22 (2013), no. 1, pp. 30-34
• 10. Maksimov S. Y.: Underwater arc welding of higher strength low-alloy steels. Welding International, vol. 24 (2010), no. 6, pp. 449-454
• 11. Akselsen O. M., Fostervoll H., Ahlen C. H.: Hyperbaric GMA welding of duplex stainless steel at 12 and 35 bar. Welding Journal, vol. 88 (2009), no. 2, pp. 21-28
• 12. Pessoa E. C. P., Bracarense A. Q., Dos Santos V. R., Monteiro M. D. J., Vieira L. A., Marinho R. R.: Challenges to develop an underwater wet welding electrode for “class A welds” classification, as required in the AWS D3.6 code. ASM Proceedings of the International Conference: Trends in Welding Research 2013, pp. 259
• 13. Mazzaferro J. A. E., Machado I. G.: Study of arc stability in underwater shielded metal arc welding at shallow depths. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 223 (2009), no. 3, pp. 699-710
• 14. Zhao B., Wu C., Jia C., Yuan X.: Numerical analysis of the weld bead profiles in underwater wet flux-cored arc welding. Jinshu Xuebao/Acta Metallurgica Sinica, vol. 49 (2013), no. 7, pp. 797- 803
• 15. AleAbbas F. M., Al-Ghamdi T. A., Liu S.: Comparison of solidification behavior between underwater wet welding and dry welding. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering – OMAE 2011, pp. 285
• 16. Shi Y., Zheng Z., Huang J.: Sensitivity model for prediction of bead geometry in underwater wet flux cored arc welding. Transactions of Nonferrous Metals Society of China (English Edition), vol. 23 (2013), no. 7, pp. 1977-1984
• 17. Christensen N.: The metallurgy of underwater welding. Proceedings of the International Conference „Underwater Welding”, Trondheim, Norway 1983