Diagnostics of gears and compressors by means of advanced automatic system

• Autorzy: Tomaszewski J. , Rysiński J.

Identyfikatory

DOI

10.1515/ama-2015-0004

• Języki publikacji: EN

Abstrakty

EN

In the present paper, the diagnostics problems of gears and air-compressors are discussed. The diagnostics has been performed by means of wireless system WiViD. This system is a unique design solution, in which several functions are divided and performer by two separate devices. The mentioned device functions are as follows: data handling, processing, their analysis and presentation. In the paper, own measurement procedures were created, checked and presented. The evaluation of technical conditions of some devices was done based upon the registered diagnostic symptoms, which were compared with the allowable limits.

Słowa kluczowe

EN

gears; air-compressor; diagnostic

PL

sprężarki powietrza; diagnostyka; przekładnie

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2015
• Tom: Vol. 9, no. 1
• Strony: 19--22
• Opis fizyczny: Bibliogr. 10 poz., rys., tab., wykr.

Twórcy

autor

Tomaszewski J.

• Faculty of Mechanical Engineering and Computer Science, Department Of Mechanical Engineering Fundamentals, University of Bielsko-Biala, ul. Willowa 2, 43-300 Bielsko-Biala, Poland

autor

Rysiński J.

• Faculty of Mechanical Engineering and Computer Science, Department Of Mechanical Engineering Fundamentals, University of Bielsko-Biala, ul. Willowa 2, 43-300 Bielsko-Biala, Poland

Bibliografia

• 1. Barkov A. V., Barkova N. A. (1996), Diagnostics of gearings and geared couplings using envelope spectra methods, Proceedings of the 20th Annual Meeting of the Vibration Institute. Saint Louis, Missouri USA, 75-83.
• 2. Choy F. K., Polyshchuk V., Zakrajsek J. J., Handschuh R. F., Townsend D. P. (1996), Analysis of the effects of surface pitting and wear on the vibration of a gear transmission system, Tribology International, Vol. 29, No. 1, 77-83.
• 3. Farrahi G. H., Tirehdast M., Masoumi K. A. E., Parsa S., Motakefpoor M. (2011), Failure analysis of a gas turbine compressor, Engineering Failure Analysis, Vol. 18, No. 1, 474-484.
• 4. Feng Z., Zuo M.J . (2013), Fault diagnosis of planetary gearboxes via torsional vibration signal analysis, Mechanical Systems and Signal Processing, Vol. 36, No. 2, 401-421.
• 5. Feng Z. Z., Ming J. (2012), Vibration signal models for fault diagnosis of planetary gearboxes, Journal of Sound and Vibration, Vol. 331, No. 22, 4919-4939.
• 6. ISO 10816-1 (1995), Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – Part 1: General guidelines.
• 7. ISO 10816-3 (2009), Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ.
• 8. Mirota K., Tomaszewski J., Rysiński J. (2009), Diagnostics of scoring in gears, Solid State Phenomena, 144, 118-123.
• 9. Rama R. A., Dutta B. K. (2012), Vibration analysis for detecting failure of compressor blade, Engineering Failure Analysis, Vol. 25, 211-218.
• 10. VDI 3836 (2012), Measurement and evaluation of mechanical vibration of screw-type compressors and roots blowers, Addition to DIN ISO 10816-3.