PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Effect of Blend Ratio on the Quality Characteristics of Bamboo/Cotton Blended Ring Spun Yarn

Identyfikatory
Warianty tytułu
PL
Wpływ stosunku procentowego przędz mieszankowych bambus bawełna przędzionych obrączkowo
Języki publikacji
EN
Abstrakty
EN
The present study reveals a comparison of the physical properties of three sets of bamboo/cotton blended yarns of linear density 19.68, 14.76 and 11.81tex with those of 100% cotton yarn. Each set consisted of three yarns of fibre blend ratios 67:33, 50:50, and 33:67. The test results showed that for all the three sets of yarn, the properties of the 50:50 blended yarns were comparable with those of the 100% cotton yarn. In the case of the 19.68-tex yarn set, the 67:33 blended yarn showed properties similar to those of the 50:50 blended yarn. It was also observed that increasing the bamboo content led to a reduction in properties. Thus the quality characteristics of the blended yarn depend upon the bamboo content in the blend.
PL
Przeprowadzono analizę porównawczą właściwości fizycznych trzech zestawów przędz mieszankowych bambus/bawełna o różnej masie liniowej (19.7, 14.8 and 11.8 tex) i różnym stosunku włókien bambusowych do bawełnianych (67:33, 50:50, 33:67) i przędz bawełnianych. Stwierdzono, że właściwości mieszanki 50:50 były porównywalne z właściwościami czystych przędz bawełnianych. W przypadku przędz o masie liniowej 19.68 tex mieszanka 67:33 wykazywała właściwości podobne do mieszanki 50:50. Stwierdzono również, ze zwiększenie ilości włókien bambusowych powoduje pogorszenie właściwości przędzy.
Rocznik
Strony
38--40
Opis fizyczny
Bibliogr. 11 poz., wykr.
Twórcy
autor
  • India, Salem, Sona College of Technology,, Department of Fashion Technology
  • India, Coimbatore, Kumaraguru College of Technology, Department of Textile Technology
  • India, Salem, Sona College of Technology,, Department of Fashion Technology
Bibliografia
  • 1. Duckett K. E., Goswami B. C., Ramey H. H., Jr.; ‘Mechanical Properties of Cotton/ Polyester Yarns’, Textile Research Journal, Vol. 49, 1979 pp. 262-267.
  • 2. Gupta D. K., Shiekl A. E.; ‘The Mechanics of Blended Yams’, Applied Polymer Symposia, Vol. 27, 1975 pp. 295-315.
  • 3. Svetnickienė V., Čiukas R.; ‘Investigation of Friction Properties of Yarns from Natural Fibres’, Mechanika, Vol. 1(75), 2009 pp. 73-76.
  • 4. Béchir Azzouz, Mohamed Ben Hassen and Faouzi Sakli; ‘Adjustment of Cotton Fibre Length by the Statistical Normal Distribution: Application to Binary Blends’, Journal of Engineered Fibres and Fabrics, 2008 pp. 35-46.
  • 5. Pınar Duru Baykal, Osman Babaarslan Rızvan Erol, ‘Prediction of Strength and Elongation Properties of Cotton/Polyester- Blended OE Rotor Yarns’, Fibres & Textiles in Eastern Europe, Vol. 14, No. 1(55), 2006 pp. 18-21.
  • 6. Pan N., Chen K., Moneg C. J., Backer S.; ‘Studying the Mechanical Properties of Blended Fibrous Structures Using a Simple Model’, Textile Research Journal, Vol. 70(6), 2000 pp. 502-507.
  • 7. Jianchun Z., Peixing F.; ‘Predicting the Tensile Strength of Lyocell/PET Blended Yarns’, ITB International Textile Bulletin, Vol. 6(99), 2004 pp. 28-30.
  • 8. Pan N., Postle, R.; ‘Strengths of Twisted Blend Fibrous Structures: Theoretical Prediction of the Hybrid Effects’, Journal of the Textile Institute, 1995 pp. 559-580.
  • 9. Kemp A., Owen J. D.; ‘The Strength and Behaviour of Nylon/Cotton Blended Yarns Undergoing Strain’, Journal of the Textile Institute, Vol. 46, 1995 p. T-684.
  • 10. Ratnam T. V.; ‘Prediction of the Quality of Blended Yarns from that of the Individual Components’, Textile Research Journal, Vol. 38, 1968 pp. 360-365.
  • 11. Bojun Xu, Jion Ma; ‘Radial Distribution of Fibres in Compact-Spun Flax-Cotton Blended Yarns’, Fibres & Textiles in Eastern Europe, Vol. 18, No.1 (78), 2010 pp. 24-27.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-a39145b0-664d-4aa3-9f97-15c8c2022710
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.