Investigation of selected thermo-physical properties in the Co-based superalloy: Experiment and application study

• Autorzy: Kasala J. , Mäsiar H. , Pernis I.
• Języki publikacji: EN

Abstrakty

EN

Thermo-physical properties are the critical input parameters in computational models of solidification and casting simulations. In thermodynamics, the enthalpy is quotient of thermodynamic potential of a system, which can be used to calculate the useful work obtainable from a closed thermodynamic system under constant pressure. Differential thermal analysis has been used to study melting and solidification paths in the cobalt based superalloy FSX-414. The temperature enthalpy curve was determined from differential thermal analysis curves obtained from solidification curves. A solidification simulation of a cobalt base multi-component alloy casting was carried out to predict cooling and shrinkage porosity in the casting of a turbine engine vane segment. The effect of latent heat on the heat transfer calculation was considered by enthalpy method.

Słowa kluczowe

EN

cobalt alloy; differential thermal analysis; enthalpy curve; solidification path; DTA method

PL

stop kobaltu; analiza termiczna różnicowa; ścieżka krystalizacji; metoda DTA

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 1 spec.
• Strony: 203--206
• Opis fizyczny: Bibliogr, 15 poz., rys., tab., wykr.

Twórcy

autor

Kasala J.

• Department of Technology and Materials, Alexander Dubček University of Trenčín, Študentská 1, SK-911 50, Trenčín, Slovak Republic

autor

Mäsiar H.

• Department of Technology and Materials, Alexander Dubček University of Trenčín, Študentská 1, SK-911 50, Trenčín, Slovak Republic

autor

Pernis I.

• Department of Technology and Materials, Alexander Dubček University of Trenčín, Študentská 1, SK-911 50, Trenčín, Slovak Republic

Bibliografia

• [1] Chester T. Sims, Norman S. Stoloff, William C. Hagel: Superalloys II, John Wiley & Sons, 1987.
• [2] Orłowicz A.W., Trytek A.: Nadtapianie powierzchniowe odlewów z superstopu na bazie kobaltu MAR-M509. Archiwum Odlewnictwa, PAN, t. 4, z. 14, p. 348-355, 2004.
• [3] Orłowicz W., Trytek A.: Podatność odlewów ze stopu MAR-M509 do nadtapiania powierzchniowego. 6th International Scietific Conference TRANSFER, 15-17. September 2004, A Dubcek University of Trencin, z.2, p.361-364, 2004.
• [4] Backerund L., Krol E., Tamminen J.: Solidification Characteristics of Aluminium Alloys. Vol 1, SkanAluminium, Oslo, Norway, 1986.
• [5] Backerund L., Krol E., Tamminen J.: Solidification Characteristics of Aluminium Alloys. Vol 2, SkanAluminium, De Plaines, IL, 1990.
• [6] Rappaz M.: Application of Inverse Methods to the Estimation of Boundary Conditions and Properties, Modelling of Casting, Welding and Advanced Solidification Processes, London, 1985.
• [7] Čaplovič, Ľ.: Apply of Selected Experimental Technics in Materials Engineering. Dresden, Forschungszentrum Dresden, 2009. Properties of Solids, Elsevier (Amsterdam) 1984.
• [8] Šesták J.: Thermophysical Properties of Solids, Elsevier, Amsterdam, 1984.
• [9] Gallagher P.K.: Handbook of Thermal Analysis and Calorimetry: Principles and Practice. Volume 1. 2003.
• [10] Orłowicz W., Mróz M., Tupaj M.: Application of computer simulation to projecting of the castings. Acta Metallurgica Slovaca, 11, 2005, p. 41-44.
• [11] Bähr R., Djurdjevic M., Pavlovic J.: 8. Magdeburger Maschinenbau-Tage & 7. MAHREG, Innovationsforum, Magdeburg, Germany, 10-11. October, 2007, p. 210-219.
• [12] Molnár D., Dúl J.: Simulation of casting processes: Filling, solidification, residual stresses calculation. World Technical Forum 2009 and 46th Foundry Days, 1-3 June, Brno, 2009.
• [13] Pavlovic J., Djurdjevic M., Bouska O., Bähr R.: 44th Foundry Days and 4tbInternational PhD Foundry Conference, Brno, 16-17. October, 2007, p.12-22.
• [14] Voller V., Cross M.: Accurate Solutions of Moving Boundary Problems Using the Enthalpy Method. Int. J. Heat Mass Transfer, Vol. 24, 1981, p. 545-556.
• [15] Sabau A.S.: Numerical simulation of the investment casting process. AFS Transactions, 2005.