Creative designing of machine tools - contextually

• Autorzy: Hosnedl S. , Marek J.
• Języki publikacji: EN

Abstrakty

EN

This paper describes the matter how a developed product passes through the company. The important influence is underlined here, which the designing process has on the order passage through the company. The fact is underlined here that innovation cycles have been reduced in a considerable way. Especially in pre manufacturing stages, the innovation cycle can be reduced in a considerable way by means of theoretically supported system methods of creative designing. The paper describes key principles how to apply these principles which enable apparently contradictory system introduction to designers' work with simultaneous increasing of a space for their demanding creative work, with the target to increase the quality of their work and to increase the passage possibilities of this "narrow bottle neck" within development and order processes.

Słowa kluczowe

EN

systematic designing; machine tool; engineering designer; running time; system approach

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2008
• Tom: Vol. 8, No. 1
• Strony: 94--103
• Opis fizyczny: Bibliogr. 16 poz., rys.

Twórcy

autor

Hosnedl S.

• University of West Bohemia, Univerzitni 8, 306 14 Pilsen, Czech Republic

autor

Marek J.

• TOSHULIN a.s., Wolkerova 845, 768 24 Hulin, Czech Republic

Bibliografia

• [1] ANDREASEN, M. M., HEIN, L., Integrated Product Development. Berlin: IFS Publ. and Springer, 1987, ISBN 3-540-16679-3, 2. vyd. Kopenhagen, TU Denmark, 2000.
• [2] Auf dem Wege zum Konstruktionswissenschaft. Cottbus, TU 1997.
• [3] CSN EN ISO 9000 (idt ISO 9000:2005)., Quality management systems - Fundamentals and vocabulary. Prague: Czech Institute for Standardisation. (2002), 2006.
• [4] EDER, W., HOSNEDL, S., Design Engineering, A Manual for Enhanced Creativity. I. vyd. Boca Raton, Florida USA : CRC Press, Taylor & Francis Group, 2008, 588. ISBN 978-1-4222-476.
• [5] EEKELS, J., On the fundamentals of Engineering Design Science. Journal of Engineering Design. 2000, Vol. 11, No 4, 377-397, Vol. 12, No 3, 2001,255-281.
• [6] EHRLENSPIEL, K., Integrierte Produktentwicklung. München: Carl HanserVerlag, 1995, ISBN 3-448-15706-9
• [7] HOSNEDL, S., VANEK, V., Engineering Design Science based Design Research for Education and Practice. In: Special Issue of the Selected Articles (4 Best Paper Awarded and 10 being come up for the Best Paper Award) of the 1st Conf. on Design Eng. and Science - ICDES2005. Vienna, Austria: Japan Society for Design Engineering (JDSE) and TU Vienna, (28.-31.10.2005, 63 - 68.). Tokyo, Japan: JSDE, 2006, 31-36, ISSN 0919-2948.
• [8] HOSNEDL, S.: Hardware, Software, Processed Materials and Services as Consistent Elements of a Designed Technical Product. In: Proceedings of the 16th International Conf. on Eng. Design - ICED 07, Paris, France: Ecole Centrale Paris, 28.-30.8.2007, Abstract, 749-750, Paper on CD-ROM 6 p.; ISBN 978-80-7043-599-1.
• [9] HOSNEDL, S., SRP Z., Integrated Engineering and Industrial Design Projects. In: Proceedings of the 10th Applied Engineering Design Science Workshop - AEDS 2007. Pilsen, Educational and Research library of Pilsen Region: AEDS SIG and ZCU-KKS, Univ. of West Bohemia, 2007, 29-38. ISBN 978-80-7043-600-4.
• [10] HUBKA, V., EDER, W.E., Theory of Technical Systems. Berlin: Springer - Verlag, 1988, ISBN 3-540-17451-6
• [11] HUBKA,V., EDER, W.E., Design Science. London, Springer,1996, ISBN 3-540-19997-7.
• [12] MAREK, J., Synergy Effect in the Designing Process of Machine Tools. (Synergicky efekt vkonstr. Procesu obrab. stroje.) Inaugural dissertation. Brno: VUT, 2004.
• [13] MAREK, J., How to Go Further in Designing Metodology of Machine Tools?. Proceedings of the 9th Applied Engineering Design Science Workshop - AEDS 2006. Editor: V. Vanök, S. Hosnedl. a CD-ROM, Plzeft, Research nd Educational Lib.: AEDS SIG a ZCU-KKS, 27.-28.10.2006, 81-88. ISBN 80-7043-490-2.
• [14] MAREK, J., Does Engineering Design Science Support Designing of Machine Tools Enough?, In: Proceedings of the AEDS&DTRM SIGs Workshop Needs and Requirements Regarding Engineering Design Theory and Metodology.CD-KOM, Editor: S. Hosnedl, V. J. Bartak, V. Vanek,. Paris, Francie: Ecole Centrale Paris and Design Society, 2007, 27.8.2007, 8 ; ISBN 978-80-7043-599-1
• [15] MAREK, J., Integrated Development of Machine Tools. In: Proceedings of the 10th Applied Engineering Design Science Workshop - AEDS 2007. Pilsen, Educational and Research library of Pilsen Region: AEDS SIG and ZCU- KKS, University of West Bohemia, 2007, 39-48. ISBN 978-80-7043-600-4.
• [16] SOCHOR, J. Oil Price Is 100 Dollars and It Shall Increase. (Ropa je za 100 dolaru a ma rust.) Hospoddfske noviny 2/2008, 3.1.2008, Praha: Economia. 3, ISSN 0862-9587.