The influence of modification on the flow and the solidification of AlSi10Mg alloy

• Autorzy: Łągiewka M. , Konopka Z. , Zyska A. , Nadolski M.
• Języki publikacji: EN

Abstrakty

EN

The presented work discusses the influence of modification of AlSi10Mg alloy on its solidification kinetics during the mould cavity filling. In order to study this influence, the measurements concerning temperature changes of the modified and the non-modified AlSi10Mg alloy have been done at selected places of the mould. Thus the solidification and cooling curves have been achieved. The recorded temperature changes have served as a basis for drawing the graphs representing the flow rate of the metal stream and the distance travelled by the front of the stream against the time. An addition of modifier in the form of strontium master alloy has caused a significant shortening of the flown distance. The recorded solidification and cooling curves have also allowed for determining the temperature changes at the front of the metal stream during the mould cavity filling. Taking the achieved results into account it has been found that the modified alloy begins to solidify after having passed a distance of about the one-third of the distance determined for the non-modified alloy.

Słowa kluczowe

EN

silumin; castability; modification of silumins; solidification of aluminium alloys

PL

silumin; lejność; modyfikacja siluminu; krzepnięcia stopów aluminium

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 4
• Strony: 119--122
• Opis fizyczny: Bibliogr. 12 poz., rys., wykr.

Twórcy

autor

Łągiewka M.

• Technical University of Częstochowa, Department of Foundry, ul. Armii Krajowej 19, 42-200 Częstochowa, Polska

autor

Konopka Z.

• Technical University of Częstochowa, Department of Foundry, ul. Armii Krajowej 19, 42-200 Częstochowa, Polska

autor

Zyska A.

• Technical University of Częstochowa, Department of Foundry, ul. Armii Krajowej 19, 42-200 Częstochowa, Polska

autor

Nadolski M.

• Technical University of Częstochowa, Department of Foundry, ul. Armii Krajowej 19, 42-200 Częstochowa, Polska

Bibliografia

• [1] Z. Górny, Non-ferrous casting alloys, WNT, Warsaw, 1992 (in Polish).
• [2] Z. Górny, J. Sobczak, Modern casting materials based on the non-ferrous metals, Ed. ZA-PIS, Cracow, 2005 (in Polish).
• [3] Z. Poniewierski, Crystallization, structure, and properties of silumins, WNT, Warsaw, 1989 (in Polish).
• [4] L. A. Dobrzański, Engineering materials and material designing, WNT, Warsaw, 2006 (in Polish).
• [5] Laboratory practice in casting of the non-ferrous metals. Modification of silumins, TU Częstochowa, Department of Foundry, academic textbook (in Polish).
• [6] The assessment of the possibility of obtaining nanomodifiers for aluminium alloys by means of the mechanical alloying method, Works of Foundry Institute, Cracow, vol. XLVIII, issue 3 (2008).
• [7] Z. Poniewierski, J. Linkowski, B. Korc, Persistent modification of silumins, TU Warsaw, Institute of Materials Engineering (in Polish).
• [8] A. Białobrzeski, P. Dudek, A. Fajkiel, W. Leśniewski, Continuous modification of silumins with sodium. A survey, Przegląd Odlewnictwa (Foundry Review), No. 1-2 (2006) (in Polish).
• [9] M. Dudyk, B. Ficek, B. Suchanek, P. Wasilewski, Possibility of persistent modification of AlSi6Cu2Mg alloy with strontium and antimony, Przegląd Odlewnictwa (Foundry Review), No. 2 (1989) (in Polish).
• [10] A. Kossowski, Physical metallurgy of casting alloys, Ed. AGH, Cracow, 1996 (in Polish).
• [11] K. Przybyłowicz, Physical metallurgy. Academic textbook. Mechanics, 8th edition, WNT, Warsaw, 2007 (in Polish).
• [12] M. Łągiewka, Gravity-cast AlMg10 alloy matrix composites with silicon carbide and graphite particles. Doctor’s thesis, TU Częstochowa, Częstochowa, 2005 (in Polish).