High Temperature Study of Industrial Slag from Further Modelling Point of View

• Autorzy: Ślęzak Marta , Karbowniczek Mirosław , Migas Piotr , Ślęzak Wojciech

Identyfikatory

DOI

10.24425/amm.2021.135901

• Języki publikacji: EN

Abstrakty

EN

This paper deals with the subject of high temperature analysis of refining slags originating from a ladle from an actual/industrial secondary refining process. The objective of the conducted research was to learn about the rheological behaviour of the complex industrial slag systems analysed in conditions of variable rheological parameters and temperature, also analyses with a high-temperature microscope. The analysed system seems to be a Newtonian body (with viscosity between 0.1 and 0.8 Pa·s, depend on temperature value, and chemical composition).

Słowa kluczowe

EN

viscosity; slag; steelmaking modelling

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2021
• Tom: Vol. 66, iss. 2
• Strony: 637--643
• Opis fizyczny: Bibliogr. 11 poz., rys., tab., wykr.

Twórcy

autor

Ślęzak Marta

• AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland

• https://orcid.org/0000-0001-8561-4383

autor

Karbowniczek Mirosław

• AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland

• https://orcid.org/0000-0002-2060-8756

autor

Migas Piotr

• AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland

• https://orcid.org/0000-0001-7392-1706

autor

Ślęzak Wojciech

• AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland

• https://orcid.org/0000-0001-7938-3021

Bibliografia

• [1] A. Chychko, S. Seetharaman, Metall. Mater. Trans. B 42, 20-29 (2011).
• [2] E.B. Pretorius, R.C. Carlisle, Proceedings of the 56th Electric Furnace Conference 275-292 (New Orleans, LA, USA, 1998).
• [3] T. Talapaneni, N. Yedla, S. Pal, S. Sarkar, Metall. Mater. Trans. B, 48, 1450-1462 (2017).
• [4] L. Holappa, Treatise on Process Metallurgy 3, 301-43 (2014): Industrial Processes, Elsevier, Oxford.
• [5] V .C. Da Rocha, J.A.M. Pereira, A. Yoshioka, W.V. Bielefeldt, A.C.F. Vilela, Metall. Mater. Trans. B 48, 1423-1432 (2017).
• [6] Y. Sasaki, H. Urata M. Iguchi, M. Hino, ISIJ Int. 46, 385-87 (2006).
• [7] T. Wu, Q. Wang, C. Yu, S. He, J. Non-Cryst. Solids 450, 23-31 (2016).
• [8] M. Ślęzak, Arch. Metall. Mater. 60, 581-589 (2015).
• [9] K. Sunahara, K. Nakano, M. Hoshi, T. Inada, S. Komatsu, T. Yamamot, ISIJ Int. 48, 420-29 (2008).
• [10] G.-H. Zhang, K.-C. Chou, K. Mills, Metall. Mater. Trans. B, 45698-706 (2014).
• [11] M. Korolczuk-Hejnak, P. Migas, Arch. Metall. Mater. 57, 963-969 (2012).

Uwagi

1. Research financed through subvention funds of AGH University of Science and Technology in Krakow, no. 16.16.110.663/6.

2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).