Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
This research investigates the effect of using hard ceramic SiC particles on the mechanical and tribological properties of Al6082 alloy. This investigation is performed by mixing various contents of SiC as weight percentages of 0, 1, 2, 3, and 4% with Al6082. Mechanical tests, such as tensile strength and hardness tests, are adopted for this composite (Al6082/SiC) at various contents of the filler (SiC). Besides, the wear test is conducted for the Al6082/SiC composite at various normal loads (10, 15, 20, 25, and 30 N) and sliding distances (200, 400, 600, 800, and 1000 m). Taguchi’s approach is used to create the experimental runs’ matrix. The findings reveal that the mechanical properties improved with increasing the percentage of SiC reinforcement. The tensile strength and Rockwell hardness of Al6082 increased by about 24.6 and 14%, respectively, using 4% of SiC particles. Regarding the tribological behavior, the average wear of Al6082 alloy decreased with increasing the percentage of SiC reinforcement due to higher hardness of reinforcement in Al6082/SiC composite. At the same time, an increase in the normal load and sliding distance led to a decrease in wear due to increasing plastic deformation at elevated loadings and larger area contacts.
Czasopismo
Rocznik
Tom
Strony
391--405
Opis fizyczny
Bibliogr. 29 poz., rys., tab., wykr.
Twórcy
autor
- University of Wasit, College of Engineering, Mechanical Department Al K¯ut, Wasit, Iraq
autor
- University of Wasit, College of Engineering, Mechanical Department Al K¯ut, Wasit, Iraq
autor
- University of Wasit, College of Engineering, Mechanical Department Al K¯ut, Wasit, Iraq
Bibliografia
- 1. Al-Alkawi H.J., Aziez S.A., Idan D.A., Microstructure and electrical onductivity of 7075Al alloy/SiC nano composites, Engineering and Technology Journal, 36(10A): 1034– 1038, 2018, doi: 10.30684/etj.36.10A.3.
- 2. Nadim A., Taghiabadi R., Razaghian A., Noghani M.T., Ghoncheh M.H., Effect of Fe-impurity on tribological properties of Al-15Mg2Si composite, Transactions of Nonferrous Metals Society of China (English Edition), 28(6): 1084–1093, 2018, doi: 10.1016/S1003-6326(18)64744-2.
- 3. Madhankumar S., Rajesh S., Vignesh T., Harikrishnan M., Fabrication of Al 6082, SiC and boron glass powder composites and evaluation of mechanical properties, International Journal of Innovative Research in Science, Engineering and Technology, 7(1), 2018, doi: 10.15680/IJIRSET.2017.0701003.
- 4. Kumar D., Suman K, Sasanka C., Ravindra K., Poddar P., Venkata S., Microstructure, mechanical response and fractography of AZ91E/Al2O3 (p) nano composite fabricated by semi solid stir casting method, Journal of Magnesium and Alloys, 5(1): 48–55, 2017, doi: 10.1016/j.jma.2016.11.006.
- 5. Khajuria A., Influence of ceramic Al2O3 particulates on performance measures and surface characteristics during sinker EDM of stir cast AMMCs, World Journal of Engineering, 16(4): 526–538, 2019, doi: 10.1108/WJE-01-2019-0015.
- 6. Parande G., Manakari V., Kopparthy S., Gupta M., A study on the effect of lowcost eggshell reinforcement on the immersion, damping and mechanical properties of magnesium–zinc alloy, Composites Part B: Engineering, 182(1): 1–37, 2020, doi: 10.1016/ j.compositesb.2019.107650.
- 7. Najem S., Machinability of Al-2024 reinforced with Al2O3 and or B4C, Journal of University of Babylon for Engineering Sciences, 21(1): 1–13, 2013.
- 8. Jansson S., Leckie F., The mechanics of failure of silicon carbide fiber-reinforced glass-matrix composites, Acta Metallurgica et Materialia, 40(11): 2967–2978, 1992, doi: 10.1016/0956-7151(92)90461-M.
- 9. Karunanithi R., Ghosh D., Bera S., Influence of particle size of the dispersoid on compressibility and sinterability of TiO2 dispersed Al 7075 alloy composites prepared by mechanical milling, Advanced Powder Technology, 25(5): 1500–1509, 2014.
- 10. Divagar S., Vigneshwar M., Selvamani S., Impacts of nano particles on fatigue strength of aluminum based metal matrix composites for aerospace, Materials Today: Proceedings, 3(10): 3734–3739, 2016, doi: 10.1016/j.matpr.2016.11.021.
- 11. Chen H., Alpas A.T., Sliding wear map for the magnesium alloy Mg-9Al-0.9 Zn (AZ91), Wear Journal, 246(1–2): 106–116, 2000, 10.1016/S0043-1648(00)00495-6.
- 12. Sharma S.C, Anand B., Krishna M., Evaluation of sliding wear behaviour of feldspar particle-reinforced magnesium alloy composites, Wear Journal, 241(1): 33–40, 2000, 10.1016/S0043-1648(00)00349-5.
- 13. Thakur S.K., Dhindaw B.K., The influence of interfacial characteristics between SiCp and Mg/Al metal matrix on wear, coefficient of friction and microhardness, Wear, 247(2): 191–201, 2001, 10.1016/S0043-1648(00)00536-6.
- 14. Zawawi N.N.M., Azmi W.H., Redhwan A.A.M., Sharif M.Z., Coefficient of friction and wear rate effects of different composite nanolubricant concentrations on Aluminium 2024 plate, IOP Conference Series: Materials Science and Engineering, 257(1): 012065, 2017, doi: 10.1088/1757-899X/257/1/012065.
- 15. Naveed M., Khan A.R.A., Dry sliding wear of heat treated hybrid metal matrix composites, IOP Conference Series: Materials Science and Engineering, 149: 012084, 2016, doi: 10.1088/1757-899X/149/1/012084.
- 16. Baradeswaran A., Perumal A.E., Influence of B4C on the tribological and mechanical properties of Al 7075–B4C composites, Composites Part B: Engineering, 54: 146–152, 2013, doi: 10.1016/j.compositesb.2013.05.012.
- 17. Moridi A., Powder Consolidation Using Cold Spray, Cham: Springer International Publishing, 2017, doi: 10.1007/978-3-319-29962-4.
- 18. Rana S.R., Pattnaik A.B., Patnaik S.C., Comparison of wear behaviour and mechanical properties of as-cast Al6082 and Al6082-T6 using statistical analysis, IOP Conference Series: Materials Science and Engineering, 338: 012050, 2018, doi: 10.1088/1757- 899X/338/1/012050.
- 19. Srikanth D.V., Desu V.S., Investigation of drilling time v/s depth of cut & kerf using abrasive jet machining, IOSR Journal of Mechanical and Civil Engineering, 12(6): 54–61, 2020, doi: 10.9790/1684-12625461.
- 20. ASTM E8-04 Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, 2010.
- 21. ASTM E18-15 Standard Test Methods for Rockwell Hardness of Metallic Materials, ASTM International, 2019.
- 22. ASTM G99-04 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, ASTM International, 2010.
- 23. Nie J., Fan J., Zhang S., Wei S., Zuo T., Ma Z., Xiang Z., Tensile and fracture properties of 15 vol% SiCp/2009Al composites fabricated by hot isostatic pressing and hot extrusion processes, Acta Metallurgica Sinica (English Letters), 27(5): 875–884, 2014, doi: 10.1007/s40195-014-0127-2.
- 24. Al-Obaidi A.J., Ultrasonic Joining of Metal-Polymer Surfaces, Ph.D. Thesis, The University of Sheffield, UK, 2017.
- 25. Archard J., Wear theory and mechanisms, [in:] Peterson M.B., Winer W.O. [Eds.], Wear Control Handbook, pp. 35–80, American Society of Mechanical Engineers, New York, 1980.
- 26. Smith A.V., Chung D.D.L., Titanium diboride particle-reinforced aluminium with high wear resistance, Journal of Materials Science, 31(1): 5961–5973, 1996, doi: 10.1007/BF01 152146.
- 27. Yang J., Chung D.D.L., Wear of bauxite-particle-reinforced aluminum alloys, Wear, 135(1): 53–65, 1989, doi: 10.1016/0043-1648(89)90095-1.
- 28. Kumar M., Murugan M.A., Baskaran V., Ramji K.S.H., Effect of sliding distance on dry sliding tribological behaviour of Aluminium Hybrid Metal Matrix Composite (AlHMMC): An alternate for automobile brake rotor – A Grey Relational approach, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 230(4): 402–415, 2016, doi: 10.1177/1350650115602724.
- 29. Tahir N.A.M., Abdollah M.F.B., Hasan R., Amiruddin H., The effect of sliding distance at different temperatures on the tribological properties of a palm kernel activated carbon-epoxy composite, Tribology International, 94(1): 352–359, 2016, doi: 10.1016/j.triboint.2015.10.001.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-a26a4149-38c2-4aad-8464-d02ce024d0ee