PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Structural and Morphological Evaluations of Natural Hydroxyapatite from Calcined Animal Bones for Biomedical Applications

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Several biomedical materials have been employed as drug delivery systems, but natural Hydroxyapatite (HAP) has been proven to be exceptionally better than other materials owing to its excellent bioactivity and biocompatibility properties. In this study, nat­ural HAP was obtained from bovine and caprine bones and comparatively analysed for biomedical applications. The bones were hydrothermally treated, calcined in the temperature range of 700–1100°C, held for 2 hours in an electric furnace to remove the organic contents; milled, sifted with 150 μm mesh sieve and then characterized. It was revealed by Energy Dispersive X-Ray Spectroscopy (EDS) that the bovine and caprine bone samples calcined at 1000°C had calcium/phosphorus ratio (Ca/P) of 1.66 closest to the standard of 1.67. The bovine HAP showed the best crystallinity (86.23%) at 1000°C while caprine HAP had its highest (87.25%) at 1100°C. Fourier Transform Infrared Spectroscopy (FTIR) results revealed that the calcination temperature must be greater than 700°C to isolate high quality HAP. The Scanning Electron Microscopy (SEM) showed that the samples calcined at 800°C had the largest average particle size (85.34 μm) while porosity increases with calcination temperature in both samples. The HAP obtained at a calcination temperature of 1000°C proved to have the best quality for biomedical applications.
Słowa kluczowe
Rocznik
Strony
14--21
Opis fizyczny
Bibliogr. 35 poz., fot., wykr.
Twórcy
  • University of Lagos, Faculty of Engineering, Department of Metallurgical & Materials Engineering, Akoka, Lagos, Nigeria
  • Federal Institute of Industrial Research, Projects Development and Design Department, Cappa Bus Stop, Oshodi, Lagos, Nigeria
  • University of Lagos, Faculty of Engineering, Department of Metallurgical & Materials Engineering, Akoka, Lagos, Nigeria
  • University of Lagos, Faculty of Pharmacy, Department of Pharmaceutics and Pharmaceutical Technology, Idi– Araba, Lagos, Nigeria
  • University of Lagos, Faculty of Engineering, Department of Metallurgical & Materials Engineering, Akoka, Lagos, Nigeri
  • University of Lagos, Faculty of Engineering, Department of Metallurgical & Materials Engineering, Akoka, Lagos, Nigeria
Bibliografia
  • 1. Khandelwal H. & Prakash S. (2016). Synthesis and characterization of hydroxyapatite powder by eggshell. Journal of Minerals and Materials Characterization and Engineering, 4(2), 119–126. Doi: https://dx.doi.org/10.4236/jmmce.2016.42011.
  • 2. Venkatesan J., Lowe B., Manivasagan P., Kang K.-H., Chalisserry E.P., Anil S., Kim D.G. & Kim S.-K. (2015). Isolation and characterization of nano-hydroxyapatite from salmon fish bone. Materials, 8(8), 5426–5439. Doi: https://doi.org/10.3390/ma8085253.
  • 3. Bano N., Jikan S.S., Basri H., Adzila S. & Zago D.M. (2019). XRD and FTIR study of A&B type carbonated hydroxyapatite extracted from bovine bone. In: Proceedings of the AIP Conference, AIP Publishing, Article ID 020100.
  • 4. Zhu Y., Murali S., Stoller M.D., Ganesh K.J., Cai W., Ferreira P.J., Pirkle A., Wallace R.M., Cychosz K.A. , Thommes M., Su D., Stach E.A. & Ruoff R.S. (2011). Carbon-based supercapacitors produced by activation of graphene. Science, 332(6037), 1537–1541. Doi: https://doi.org/10.1126/science.1200770.
  • 5. Shalaby S.W. & Salz U. (Eds.) (2007). Polymers for dental and orthopedics applications. Boca Raton: CRC Press.
  • 6. Fahmy M.D., Jazayeri H.E., Razavi M., Masri R. & Tayebi L. (2016). 3-Dimensional bioprinting materials with potential applica¬tion in preprosthetic surgery. Journal of Prosthodontics, 25(4), 310–318. Doi: https://doi.org/10.1111/jopr.12431.
  • 7. Dhandayuthapani B., Yoshida Y., Maekawa T. & Sakthi Kumar D. (2011). Polymeric scaffolds in tissue engineering application: A review. International Joutnal of Polymer Science, Article ID 290602. Doi: https://doi.org/10.1155/2011/290602.
  • 8. Manalu J.L., Soegijono B. & Indrani D.J. (2015). Characterization of hydroxyapatite derived from bovine bone. Asian Journal of Applied Sciences, 3(4), 758–765.
  • 9. Rajesh R., Hariharasubramanian A. & Ravichandran D. (2012). Chicken bone as a bioresource for the bioceramic (hydroxyap¬atite). Phosphorus, Sulfur, and Silicon and the Related Elements, 187(8), 914–925. Doi: https://doi.org/10.1080/10426507.2011.650806.
  • 10. Mohd Pu’ad N.A.S., Koshy P., Abdullah H.Z., Idris M.I. & Lee T.C. (2019). Syntheses of hydroxyapatite from natural sources. Heliyon, 5(5), e01588. Doi: https://doi.org/10.1016/j.heliyon.2019.e01588.
  • 11. Agrawal K., Singh G., Puri D. & Prakash S. (2011). Synthesis and characterization of hydroxyapatite powder by Sol-Gel method for biomedical application. Journal of Minerals and Materials Characterization and Engineering, 10(8), 727–734. Doi: https://doi.org/10.4236/jmmce.2011.108057.
  • 12. Gentile P., Wilcock C.J., Miller C.A., Moorehead R. & Hatton P.V. (2015). Process optimisation to control the physico-chemical characteristics of biomimetic nanoscale hydroxyapatites prepared using wet chemical precipitation. Materials, 8(5), 2297–2310. Doi: https://doi.org/10.3390/ma8052297.
  • 13. Yang Y., Wu Q., Wang M., Long J. & Mao Z. (2014). Hydrothermal synthesis of hydroxyapatite with different morphologies: Influence of supersaturation of the reaction system. Crystal Growth and De¬sign, 14(9), 4864–4871. Doi: https://doi.org/10.1021/cg501063j.
  • 14. Kumar G.S., Sathish L., Raji G. & Girijab E.K. (2015). Utilization of snail shells to synthesize hydroxyapatite nanorods for orthopedic applications. RSC Advances, 5(49), 39544–39548. Doi: https://doi.org/10.1039/C5RA04402B.
  • 15. Rana M., Akhtar N., Rahman S., Jamil H. & Asaduzzaman S.M. (2017). Extraction of hydroxyapatite from bovine and human cortical bone by thermal decomposition and effect of gamma radiation: A comparative study. International Journal of Complementary & Alternative Medicine, 8(3), 00263. Doi: https://doi.org/10.15406/ijcam.2017.08.00263.
  • 16. Akram M., Ahmed R., Shakir I., Ibrahim W.A.W. & Rafaqat H. (2014). Extracting hydroxyapatite and its precursors from natural re¬sources. Journal of Materials Science, 49(4), 1461–1475. Doi: https://doi.org/10.1007%2Fs10853-013-7864-x.
  • 17. Murugan R. & Ramakrishna S. (2005). Porous bovine hydroxyapatite for drug delivery. Journal of Applied Biomaterials & Biomechanics, 3(2), 93–97.
  • 18. Ramesh S., Looa Z.Z., Tana C.Y., Chewb W.J.K., Chinga Y.C., Tarlochanc F., Chandrand H., Krishnasamye S., Bangf L.T. & Sarhan A.A.D. (2018). Characterization of biogenic hydroxyapatite derived from animal bones for biomedical applications. Ceramics International, 44(9), 10525–10530. Doi: https://doi.org/10.1016/j.ceramint.2018.03.072.
  • 19. Ojo O.E., Sekunowo I.O., Ilomuanya M.O., Gbenebor P.O. & Adeo-sun S.O. (2021). Compositions and thermo-chemical analysis of bovine and caprine bones. Kufa Journal of Engineering, 12(3), 56–68. Doi: https://doi.org/10.30572/018/kje/120305.
  • 20. Ofudje E.A., Rajendran A., Adeogun A.I., Idowu M.A., Kareem S.O. & Pattanayak D.K. (2017). Synthesis of organic derived hydroxy-apatite scaffold from pig bone waste for tissue engineering applications. Advanced Powder Technology, 29(1), 1–8. Doi: https://doi.org/10.1016/j.apt.2017.09.008.
  • 21. Venkatesan J. & Kim S.K. (2010). Effect of temperature on isolation and characterization of hydroxyapatite from tuna (Thunnus obesus) bone. Materials, 3(10), 4761–4772. Doi: https://doi.org/10.3390/ma3104761.
  • 22. Figueiredo M., Fernando A., Martins G., Freitas J., Judas F. & Figue¬iredo H. (2010). Effect of the calcination temperature on the composition and microstructure of hydroxyapatite derived from human and animal bone. Ceramics International, 36(8), 2383–2393. Doi: https://doi.org/10.1016/j.ceramint.2010.07.016.
  • 23. Ooi C.Y., Hamdi M. & Ramesh S. (2007). Properties of hydroxyapatite produced by annealing of bovine bone. Ceramics International, 33(7), 1171–1177. Doi: https://doi.org/10.1016/j.ceramint.2006.04.001.
  • 24. Sofronia A.M., Baies R., Anghel E.M., Marinescu C.A. & Tanasescu S. (2014). Thermal and structural characterization of synthetic and natural nanocrystalline hydroxyapatite. Materials Science and En-gineering: C, 43, 153–163. Doi: https://doi.org/10.1016/j.msec.2014.07.023.
  • 25. Nga N.K., Giang L.T., Huy T.Q., Viet P.H. & Migliaresi C. (2014). Surfactant-assisted size control of hydroxyapatite nanorods for bone tissue engineering. Colloids and Surfaces B: Biointerfaces, 116, 666–673. Doi: https://doi.org/10.1016/j.colsurfb.2013.11.001.
  • 26. Shavandi A., Bekhit A.E., Ali A. & Sun Z. (2015). Synthesis of nano-hydroxyapatite (nHA) from waste mussel shells using a rapid microwave method. Materials Chemistry and Physics, 149–150, 607–616. Doi: https://doi.org/10.1016/j.matchemphys.2014.11.016.
  • 27. Bahrololoom M.E., Javidi M., Javadpour S. & Ma J. (2009). Characterisation of natural hydroxyapatite extracted from bovine cortical bone ash. Journal of Ceramic Processing Research, 10(2), 129–138. Doi: https://doi.org/10.36410/jcpr.2009.10.2.129.
  • 28. Blanco A., Monte M.C., Campano C., Balea A., Merayo N. & Negro C. (2018). Nanocellulose for industrial use: cellulose nanofibers (CNF), cellulose nanocrystals (CNC), and bacterial cellulose (BC). In: C.M. Hussain, Handbook of Nanomaterials for Industrial Applications Elsevier, 74–126. Doi: https://doi.org/10.1016/B978-0-12-813351-4.00005-5.
  • 29. Zhang H., Yan D., Gedara S.M.K., Marakkalage S.S.F.D., Methlal J.G.K, Han Y.Ch. & Dai H.L. (2017). View effects of crystallinity and surface modification of calcium phosphate nanoparticles on the loading and release of tetracycline hydro-chloride. IOP Conference Series: Materials Science and Engineering, 182, 012052. Doi: https://doi.org/10.1088/1757-899X/182/1/012052.
  • 30. Sanosh K.P., Chu M.-C., Balakrishnan A., Kim T.N. & Cho S.-J. (2009). Preparation and characterization of nano-hydroxyapatite powder using sol-gel technique. Bulletin of Materials Science, 32(5), 465–470.
  • 31. Liu Q., Huang S., Matinlinna J.P., Chen Z. & Pan H. (2013). Insight into biological apatite: physiochemical properties and preparation approaches. BioMed Research International. Doi: https://doi.org/10.1155/2013/929748.
  • 32. Nisar J., Razaq R., Farooq M., Iqbal M., Khan R.A., Sayed M., Shah A. & Rahman I. (2017). Enhanced biodiesel production from Jatro¬pha oil using calcined waste animal bones as catalyst. Renewable Energy, 101, 111–119. Doi: https://doi.org/10.1016/j.renene.2016.08.048.
  • 33. Sasikumar S. (2013.) Effect of particle size of calcium phosphate based bioceramic drug delivery carrier on the release kinetics of ciprooxacin hydrochloride: An in- vitro study. Frontiers of Materials Science in China, 7(3), 261–268. Doi: https://doi.org/10.1007/s11706-013-0216-6.
  • 34. Netz D.J.A., Sepulveda P., Pandolfelli V.C., Spadaro A.C.C., Alencastre J.B., Lopes Badra Bentley M.V. & Marchetti J.M. (2001). Potential use of gelcasting hydroxyapatite porous ceramic as an implantable drug delivery system. International Journal of Pharmaceutics, 213(1–2), 117–125. Doi: https://doi.org/10.1016/S0378-5173(00)00659-1.
  • 35. Mohammad N.F., Othman R. & Yeoh F.-Y. (2014). Nanoporous hy¬droxyapatite preparation methods for drug delivery applications. Reviews on Advanced Materials Science, 38, 138–147.
Uwagi
PL
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu „Społeczna odpowiedzialność nauki” - moduł: Popularyzacja nauki i promocja sportu (2022-2023)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-a26186a5-9245-4b85-9cbc-36b0a010723f
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.