Implementation of integrated management system in order to enhance equipment efficiency

• Autorzy: Zaloga Viliam , Dyadyura Konstiantyn , Rybalka Iryna , Pandova Iveta

Identyfikatory

DOI

10.1515/mspe-2019-0035

• Języki publikacji: EN

Abstrakty

EN

The main aim of presented article is to present methodology how sophisticated products as compressor equipment can be considered and analysed as a complex technical system which consists of jointly operating components – a set of hardware, software, operational staff and documented information. In process modelling, these components are interacting in different processes of inputs, outputs, mechanisms (resources) or management. Based on the regulatory requirements for each component of the system, a key efficiency indicator can be identified. This allows to control the process and make appropriate decisions to improve the system. The application of the proposed methodology for the development and implementation of an integrated management system reduce the cost of resources and significantly improve the quality of the implementation of processes.

Słowa kluczowe

EN

complex technical system; integrated management system; standards

• Wydawca: STE GROUP
• Czasopismo: Management Systems in Production Engineering
• Rocznik: 2019
• Tom: nr 4 (27)
• Strony: 221--226
• Opis fizyczny: Bibliogr. 21 poz., rys., tab.

Twórcy

autor

Zaloga Viliam

• Sumy State University, Faculty of Technical Systems and Energy Efficient Technologies 2, Rymskogo-Korsakova st., 40007 Sumy, Ukraine

autor

Dyadyura Konstiantyn

• Sumy State University, Faculty of Technical Systems and Energy Efficient Technologies 2, Rymskogo-Korsakova st., 40007 Sumy, Ukraine

autor

Rybalka Iryna

• Sumy State University, Faculty of Technical Systems and Energy Efficient Technologies 2, Rymskogo-Korsakova st., 40007 Sumy, Ukraine

autor

Pandova Iveta

• Technical University of Kosice Faculty of Manufacturing Technologies with a seat in Presov Sturova 31, 08001 Presov, Slovak Republic

Bibliografia

• [1] M. Balara, D. Duplakova and D. Matiskova. "Application of a signal averaging device in robotics 2018". Measurement, vol. 115, pp. 125-132, 2018.
• [2] P. Cacko and T. Krenicky. “Impact of lubrication interval to operating status of bearing”. Applied Mechanics and Materials, vol. 616, pp. 151-158, 2014. ISSN 1660-9336.
• [3] H. Dong Wang, G. Le Chang, J. Ping Deng, J. Jie Zheng and Y. Lin Zhao. "Theoretical Research on New Method of Highway Engineering Quality Supervision and Management-Comprehensive Six Sigma Quality Management". Applied Mechanics and Materials, vols. 584-586, pp. 2250-2263, 2014.
• [4] M. Durdan, B. Stehlikova, M. Pastor, J. Kacur, M. Laciak and P. Flegner. "Research of annealing process in laboratory conditions". Measurement, vol. 73, pp. 607-618, 2015. ISSN 0263-2241.
• [5] T. Hang Wang and P. Jun Zheng. "Analysis of Usability of ECDIS Human-Machine Interface", Applied Mechanics and Materials, vols. 519-520, pp. 1397-1400, 2014.
• [6] ISO 9001:2015. Quality management systems – Requirements [Electronic resource]. – Mode of access: https://www.iso.org
• [7] ISO 14001:2015. Environmental management systems – Requirements with guidance for use [Electronic resource]. – Mode of access: https://www.iso.org
• [8] ISO 45001:2018. Occupational health and safety management systems – equirements with guidance for use [Electronic resource]. – Mode of access: https://www.iso.org
• [9] ISO/TS 22163:2017. Railway applications – Quality management system – Business management system requirements for rail organizations: ISO 9001:2015 and particular requirements for application in the rail sector [Electronic resource]. – Mode of access: https://www.iso.org
• [10] J. Jurko, M. Džupon, A. Panda and J. Zajac. "Study Influence of Plastic Deformation a New Extra Low Carbon Stainless Steels XCr17Ni7MoTiN under the Surface Finish when Drilling". Advanced Materials Research, vols. 538- 541, pp. 1312-1315, 2012.
• [11] T. Krenicky. “Monitoring of Technical Systems Operation Using Virtual Instrumentation”. Strojarstvo extra, no. 5, pp. 25/1-25/2, 2010. ISSN 1335-2938.
• [12] C. Militaru, C. Juganaru, A.A. Abdel Rahim and A.M. Avramescu. "Some Considerations Regarding the Management Review in Certification Audit Process of Environmental Management System". Applied Mechanics and Materials, vol. 760, pp. 733-738, 2015.
• [13] K. Monkova and P. Monka. "Some aspects influencing production of porous structures with complex shapes of cells". Lecture Notes in Mechanical Engineering, pp. 267- 276, 2017.
• [14] S. Olejarova, J. Dobransky, J. Svetlik and M. Pituk. "Measurements and evaluation of measurements of vibrations in steel milling process". Measurement, vol. 106, pp. 18- 25, 2017. ISSN 0263-2241.
• [15] A. Panda, J. Duplak and J. Jurko. "Analytical expression of T-vc dependence in standard ISO 3685 for cutting ceramic". Key Engineering Materials, vols. 480-481, pp. 317- 322, 2011.
• [16] A. Panda, J. Duplak, J. Jurko and M. Behun. "New Experimental Expression of Durability Dependence for Ceramic Cutting Tool". Applied Mechanics and Materials, vols. 275-277, pp. 2230-2236, 2013.
• [17] M. Prislupcak, A. Panda, M. Jancik, I. Pandova, P. Orendac and Tibor Krenicky. "Diagnostic and Experimental Valuation on Progressive Machining Unit". Applied Mechanics and Materials, vol. 616, pp. 191-199, 2014.
• [18] M. Rimar, M. Fedak, A. Kulikov and P. Smeringai. “Study of gaseous flows in closed area with forced ventilation." MM Science Journal, vol. 2018, no. March, pp. 2188-2191, 2018.
• [19] J. Su and X. Jing Li. "Production Plan of Information Management System for Virtual Industry". Advanced Materials Research, vols. 765-767, pp. 1271-1274, 2013.
• [20] A. Todic, B. Nedeljkovic, D. Cikara and I. Ristovic. "Particulate basalt-polymer composites characteristics investigation". Mater. Des., vol. 32, no. 3, pp. 1677-1683, 2011.
• [21] J. Valicek, M. Harnicarova, A. Panda, I. Hlavaty, M. Kusnerova, H. Tozan, M. Yagimli and V. Vaclavik. "Mechanism of Creating the Topography of an Abrasive Water Jet Cut Surface". Machining, joining and modifications of advanced materials, vol. 61, pp. 111-120, 2016.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).