PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The effect of oxidation process on graphene oxide fiber properties

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Graphene, a carbon allotrope, became a significant area of research with its superior electrical, mechanical, optical properties, etc. There are several methods to obtain graphene oxide from graphite, one of which is the Hummers method. In this study, several modifications and pre-treatments preceding the Hummers method have been employed. Three different graphene oxide fibers have been produced by three different procedures, i.e. fibers obtained by Hummers method with pre-oxidation step, modified Hummers method and modified Hummers method with pre-oxidation step. It has been observed that pre-oxidation has a significant effect on graphene oxide fiber properties produced by wet spinning process (coagulation). Modified Hummers method without pre-oxidation leads to the highest breaking strength and breaking elongation. Reduced fiber linear density, breaking strength and breaking elongation together with increased crimp were observed in graphene fiber due to the addition of pre-oxidation step.
Wydawca
Rocznik
Strony
83--89
Opis fizyczny
Bibliogr. 15 poz., rys., tab.
Twórcy
autor
  • Istanbul Technical University, Faculty of Textile Technologies and Design, Department of Textile Engineering, Istanbul, Turkey
  • Istanbul Technical University, Faculty of Textile Technologies and Design, Department of Textile Engineering, Istanbul, Turkey
autor
  • Istanbul Technical University, Department of Polymer Science and Technology, Istanbul Technical University, Istanbul, Turkey
autor
  • Istanbul Technical University, Department of Materials Science and Engineering, Istanbul, Turkey
autor
  • Istanbul Technical University, Department of Chemistry, Istanbul, Turkey
Bibliografia
  • [1] BRODIE B. C., Philos. Trans. R. Soc. London, 149 (1859), 249.
  • [2] STAUDENMAIER L., Ber. Dtsch. Chem. Ges., 31 (1898), 1481.
  • [3] HUMMERS W.S., OFFEMAN R.E., J. Am. Chem. Soc., 80 (6) (1958), 1339.
  • [4] WU T. T. AND TING J. M., Surf. Coat. Technol., 231 (2013), 487.
  • [5] ALI A., JAMIL M., KHAN Z. S., AHMED S., HABIB A., AHMAD N., Power Generation System and Renewable Energy Technologies (PGSRET), (2015).
  • [6] ARDAKANI S.E.M., SINGH B.S.M., MOHAMMED N.M., AIP Conference Proceedings, (2015), 1669.
  • [7] CHEN T., ZENG B., LIU J.L., DONG J.H., LIU X.Q., WU Z., YANG X.Z., LI Z.M., 8 th China International Nanoscience and Technology Symposium (CINSTS09) IOP Publishing Journal of Physics: Conference Series, (2009), 188.
  • [8] PAULCHAMY B., ARTHI G., LIGNESH B.D., J. Nanomed. Nanotechnol., 6 (2015), 1.
  • [9] MARCANO D.C., KOSYNKIN D. V., BERLIN J. M., SINITSKII A., SUN Z., SLESAREV A., ALEMANYI L.B., LU W., TOUR J.M., ACS Nano, 4 (8) (2010), 4806.
  • [10] UCAR N., GOKCELI G., ONEN A., YUKSEK I.O., KARATEPE YAVUZ N., J. Indian. Tex., 2016
  • [11] UCAR N., GOKCELI G., ONEN A., YUKSEK I.O., KARATEPE YAVUZ N., The Effect of Coagulation Time, Number of Coagulation Bath and Ingredients on Properties of Continuous Graphene Oxide Fiber, Accepted for publication in J. Indian Fibre Tex.
  • [12] SEYEDIN S., ROMANO M.S., MINETT A.I., RAZAL J.M., Sci Rep, 14946 (2015), 1.
  • [13] PEI S., CHENG H-M., Carbon, 50 (9) (2012), 3210.
  • [14] UCAR N., GOKCELI G., ONEN A., YUKSEK I.O., KARATEPE YAVUZ N., J. Indian Tex., (2016), 1.
  • [15] ZHANG L., LIANG J., HUANG Y., MA Y., WANG Y., CHEN Y., Carbon, 47 (2009), 3365. Recei
Uwagi
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-a1f0d148-b0a7-476a-9800-f7b216275a82
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.