Insulation boards from thermoplastic bonded bark

• Autorzy: Borysiuk Piotr , Jenczyk-Tołłoczko Izabella , Derda Mateusz
• Języki publikacji: EN

Abstrakty

EN

Insulation boards from thermoplastic bonded bark. Within this work, boards from thermoplastic bonded bark were made. Grinded bark of coniferous species and recycled polyethylene were used. Four variants of boards were manufactured: three of varying polyethylene weight ratio: 30, 40 and 50%, and fourth UF resin bonded. Assumed density of boards was 300 kg/m3 , and thickness of 18 mm. Manufactured boards were examined for density, thermal properties, MOR, and swelling. Research has shown that production of insulation boards from PE bonded bark is possible. With the increase in thermoplastic weight ratio, thermal insulation of boards decreases, and their mechanical properties increases.

Słowa kluczowe

EN

insulation board; bark; polyethylene

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2012
• Tom: No. 77
• Strony: 86--89
• Opis fizyczny: Bibliogr. 11 poz.

Twórcy

autor

Borysiuk Piotr

autor

Jenczyk-Tołłoczko Izabella

autor

Derda Mateusz

Bibliografia

• 1.ANTKOWIAK L., 1997: Wykorzystanie kory niektórych drzew i krzewów. Wydawnictwo Akademii Rolniczej w Poznaniu.
• 2.BLANCHET P., CLOUTIER A., RIEDL B., 2000: Particleboard made from hammer milled black spruce bark residues. Wood Science and Technology 34, 11-19.
• 3.BORYSIUK P., MAMIŃSKI M., ZADO A., 2009: Some comments on the manufacturing of thermoplastic-bonded particleboards. Annals of Warsaw University of Life Sciences – SGGW, Forestry and Wood Technology No 68/09, 50-54.
• 4.EN 310 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
• 5.EN 317 Particleboards and fibreboards. Determination of swelling in thickness after immersion in water.
• 6.EN 319 Particleboards and fibreboards. Determination of tensile strength perpendicular to the plane of the board.
• 7.EN 622-4 Fibreboards. Specifications. Requirements for softboards.
• 8.EN ISO 6946 Building components and building elements. Thermal resistance and thermal transmittance. Calculation method.
• 9.GOZDECKI C., KOCISZEWSKI M., MIROWSKI J., WILCZYŃSKI A., ZAJCHOWSKI S., 2009: Effect of wood bark on wood-plastic composite properties. Annals of Warsaw University of Life Sciences, Forestry and Wood Technology, 68, 278-282.
• 10.GOZDECKI C., KOCISZEWSKI M., WILCZYŃSKI A., MIROWSKI J., 2010: Effect of wood bark content on mechanical properties of wood-polyethylene composite. Annals of Warsaw University of Life Sciences, Forestry and Wood Technology, 71, 203-206.
• 11.MUSZYŃSKI Z., McNATT J.D., 1984: Investigations on the use of spruce bark in the manufacture of particleboard in Poland. Forest Prod. J. 34(1), 28-35.