Proper matrix-reinforcement bonding in cast metal matrix composites as a factor of their good quality

• Autorzy: Gawdzińska K. , Chybowski L. , Przetakiewicz W.

Identyfikatory

DOI

10.1016/j.acme.2015.11.004

• Języki publikacji: EN

Abstrakty

EN

The mechanism by which the matrix connects the reinforcement (bonding of the composite structure) affects the quality of metal matrix composites. This article describes and documents the impact of metal matrix on various types of reinforcements of in situ and ex situ composites, by reviewing the relevant literature and making use of various analytic methods: optic microscopy, scanning electron microscopy and X-ray microanalysis. The reinforcement formation in the matrix of in situ composites has been described. The infiltration process of composite reinforcement has been discussed. The three basic composite classes have been presented. The reactivity of selected composite components has been pointed out.

Słowa kluczowe

EN

composite quality; composite castings; bonding of the structure; in situ; ex situ

PL

kompozyty; odlewy kompozytowe; odlewnictwo

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2016
• Tom: Vol. 16, no. 3
• Strony: 553--563
• Opis fizyczny: Bibliogr. 19 poz., rys., wykr.

Twórcy

autor

Gawdzińska K.

• Maritime University of Szczecin, Faculty of Marine Engineering, 1-2 Wały Chrobrego St., 70-500 Szczecin, Poland

autor

Chybowski L.

• Maritime University of Szczecin, Faculty of Marine Engineering, 1-2 Wały Chrobrego St., 70-500 Szczecin, Poland

autor

Przetakiewicz W.

• Maritime University of Szczecin, Faculty of Marine Engineering, 1-2 Wały Chrobrego St., 70-500 Szczecin, Poland

Bibliografia

• [1] Cholewa, Heat flow description during crystallization process of cast dispersive composites, Archives of Foundry Engineering 1 (7) (2007).
• [2] Clyne, An Introduction of Metal-Matrix Composites, Cambridge University Press, 1993.
• [3] Braszczyński, Konopka, Kompozyty, Cząstkami, Commission 8.1 Cast Composites CIATF, 1995.
• [4] University of Dubrovnik, Dr. Sc. Jadran šundrica je obranio disertaciju ‘‘modeli prostorno ojačanih struktura kompozita’’, Our Sea, International Journal of Maritime Science & Technology 55 (1–2) (2008) 75–76.
• [5] Šundrica, Jurjević, Prčan, Znanost i tehnologija materijala s osvrtom na primjenu, Our Sea, International Journal of Maritime Science & Technology 51 (3–4) (2004) 105–120.
• [6] Grabian, Nasycanie zbrojenia z ceramicznych włókien nieuporządkowanych podczas wytwarzania odlewów z kompozytów metalowych. Studia nr 35, Wyższa Szkoła Morska w Szczecinie, Szczecin, 2001.
• [7] Fraś, Janas, Kolbus, Górny, Synteza kompozytów in situ Al– TiC oraz Cu–TiC z wykorzystaniem gazu reaktywnego, Inżynieria Materiałowa 2 (2000) 48–55.
• [8] Szweycer, Jackowski, Nagolska, Szymański, Grabian, Gawdzińska, Wybrane problemy technologiczne odlewów z kompozytów aluminiowych, in: IX Konferencja Naukowo- Techniczna Odlewnictwa Metali Nieżelaznych ‘‘Nauka i Technologia’’, Mikorzyn, (2006) 121–128.
• [9] Sobczak, Sobczak, Wojciechowski, Pietrzak, Rudnik, Atlas struktur kompozytów metalowych, Instytut Transportu Samochodowego, Warszawa, 2004.
• [10] Sobczak, Sobczak, Asthana, Wojciechowski, Pietrzak, Rudnik, Atlas of Cast Metal-Matrix Composites Structures, Motor Transport Institute, Foundry Research Institute, Warsaw, Cracow, 2007.
• [11] Braszczyńska, Bochenek, Problemy z korelacją pomiędzy strukturą a własnościami odlewanych kompozytów metalowych umacnianych cząstkami ceramicznymi, PTMK 1 (2001) 28–31.
• [12] Chybowski, Laskowski, Gawdzińska, An overview of systems supplying water into the combustion chamber of diesel engines to decrease the amount of nitrogen oxides in exhaust gas, Journal of Marine Science and Technology 20 (3) (2015) 393–405. http://dx.doi.org/10.1007/s00773-015-0303-8, Springer Japan [0948-4280].
• [13] Kapuściński, Puciński, Wojciechowski, Kompozyty podstawy projektowania i wytwarzania, Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa, 1993.
• [14] Gawdzińska, Material and technological conditions of quality of metal composite castings, Archives of Foundry Engineering, Monograph, Katowice–Gliwice (2012) 19–43 (in Polish).
• [15] Gawdzińska, Quality features of metal matrix composite castings, Archives of Metallurgy and Materials 59 (3) (2013) 659–662.
• [16] Peng, Wang, Geng, Yao, Mao, Evaluation of the microstructure of in-situ reaction processed Al3Ti–Al2O3–Al composite, Scripta Metallurgica et Materialia 37 (1997) 199–204.
• [17] Chybowski, Kuźniewski, An overview of methods for wave energy conversion, Scientific Journals of the Maritime University of Szczecin 41 (113) (2015) 17–23.
• [18] Chybowski, Components Importance Analysis in Complex Technical Systems, Institute for Sustainable Technologies, National Research Institute ITE-PIB, Monograph, Radom, 2014 (in Polish).
• [19] Dolata-Grosz, Dyzia, Śleziona, Solidification and structure of heterophase composite, Journal of Achievements in Materials and Manufacturing Engineering 20 (1–2) (2007) 103–106.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę