Materials used for the production of bolts and nuts – part II. Fasteners made of steels other than stainless steel

• Autorzy: Gremza G.
• Języki publikacji: EN

Abstrakty

EN

Properties of stainless steels used for the production of bolt and nut assemblies were discussed in the paper [1] along with performance characteristics of these assemblies. In this part, properties and scope of application of bolts and nuts made of steels other than stainless steel are presented. Various fasteners made of non-ferrous metals and plastics shall be discussed in a separate paper.

Słowa kluczowe

EN

bolts; nuts; fasteners; carbon steel

• Wydawca: ELAMED Media Group
• Czasopismo: Fastener : rynek elementów złącznych
• Rocznik: 2018
• Tom: nr 1
• Strony: 71--74
• Opis fizyczny: Bibliogr. 22 poz., rys., tab.

Twórcy

autor

Gremza G.

• Silesian University of Technology

Bibliografia

• 1. Gremza G.: Materiały stosowane do wyrobu śrub i nakrętek - część I. Wyroby śrubowe ze stali nierdzewnych [Materials used for the manufacture of screws and screw caps - part I. Fasteners made of stainless steels]. „Nowoczesne Hale”, no. 5/2014, pp. 10-15.
• 2. Gremza G., Zamorowski J.: Nowoczesne połączenia w konstrukcjach stalowych - część IV. Zabezpieczenie połączeń na śruby przed odkręcaniem. [Modern connections in steel structures - part IV. Protection of bolted connections against loosening.] „Nowoczesne Hale”, no. 3/14, pp. 42-45.
• 3. Łaguna J., Łypacewicz K.: Połączenia śrubowe i nitowe [Bolted and riveted joints]. Arkady, Warszawa 1986.
• 4. Łaguna J.: Nowe wymagania dotyczące śrub w konstrukcjach stalowych [New requirements for bolts in steel structures]. „Inżynier Budownictwa”, September 2007, pp. 69-71.
• 5. PN-EN 1993-1-8 Eurocode 3: Design of steel structures. Part 1-8. Design of joints.
• 6. PN-EN 1999-1-1 Eurocode 9: Design of aluminium structures. Part 1-1. General structural rules.
• 7. PN-EN 15048-1 Non-preloaded structural bolting assemblies. Part 1: General requirements.
• 8. PN-EN 14399-1 High strength structural bolting assemblies for preloading. Part 1: General requirements.
• 9. PN-EN 14399-2: 2007 High strength structural bolting assemblies for preloading. Part 2: Suitability for preloading.
• 10. PN-EN ISO 898-1:2001 Mechanical properties of fasteners. Bolts, screws and studs.
• 11. PN-EN 20898-2: 1998 (ISO 898-2) Mechanical properties of fasteners. Nuts with specified property classes. Coarse thread.
• 12. PN-EN 1090-1 Execution of steel structures and aluminium structures. Part 1. General requirements.
• 13. PN-EN 1090-2 Execution of steel structures and aluminium structures. Part 2. Technical requirements for steel structures.
• 14. PN-EN 1090-3 Execution of steel structures and aluminium structures. Part 2. Technical requirements for aluminium structures.
• 15. PN-B-06200:2002/Ap1:2005 Steel structures in civil engineering. Conditions of execution and acceptance. Basic requirements.
• 16. PN-B-06200:1997 Steel structures in civil engineering. Conditions of execution and acceptance. Basic requirements.
• 17. PN-EN 10020 Definition and classification of steel grades.
• 18. PN-EN 10204 Metallic products. Types of inspection documents.
• 19. PN-90/B-03200 Steel structures. Static calculations and design.
• 20. PN-EN ISO 4042:2001 Fasteners. Electroplated coatings.
• 21. PN-EN ISO 10683:2004 Fasteners. Non-electrolytically applied zinc flake coatings.
• 22. PN-EN ISO 10684:2006/AC2009 Fasteners. Hot dip galvanized coatings.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).