Matrix FMEA analysis as a preventive method for quality design of hydraulic components

• Autorzy: Fabiś-Domagała Joanna , Momeni Hassan , Domagała Mariusz , Filo Grzegorz

Identyfikatory

DOI

10.2478/czoto-2019-0087

• Konferencja: 7th International Conference System Safety: Human - Technical Facility - Environment, CzOTO 2018 (7 ; 12-14.12.2018 ; Zakopane, Poland)
• Języki publikacji: EN

Abstrakty

EN

Preventive methods are important group of methods used in the process of design and which are known as quality design methods. The aim of these methods is identification of potential failures and cause-and-effect relationships in consistent and systematic way, and then taking appropriate preventive or corrective actions. The well-known examples of preventive methods also used for modelling and analysis of the criticality (risk) factor are FMEA analysis and FTA analysis. A matrix FMEA analysis method has been presented and discussed in the work. The basic assumptions related to this method were characterized and algorithms for each stages of analysis have been presented. It has been presented practical application of FMEA method on example of selected components of hydraulic system.

Słowa kluczowe

EN

hydraulic power system; FMEA; FTA

PL

układ hydrauliczny; FMEA; FTA

• Wydawca: De Gruyter
• Czasopismo: System Safety : Human - Technical Facility - Environment
• Rocznik: 2019
• Tom: Vol. 1, nr 1
• Strony: 684--691
• Opis fizyczny: Bibliogr. 31 poz., rys., tab.

Twórcy

autor

Fabiś-Domagała Joanna

• Cracow University of Technology, Poland

autor

Momeni Hassan

• Western Norway University of Applied Sciences, Norway

autor

Domagała Mariusz

• Cracow University of Technology, Poland

autor

Filo Grzegorz

• Cracow University of Technology, Poland

Bibliografia

• [1] Domagala, M., Momein, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018. Simulation of Cavitation Erosion in a Hydraulic Valve. Mater. Res. Proc. 5, 1-6.
• [2] Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobedza, J., 2017. The laser textured surfaces of the silicon carbide analyzed with the bootstrapped tribology model. Metal 2017: 26th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1252- 1257.
• [3] Fabis-Domagala, J., 2017. Analysis of defects and failures of hydraulic gear pumps with the use of selected qualitative methods. Tribologia, 49 (2), 33-38.
• [4] Fabis-Domagala, J., Filo, G., Domagala, M., Momeni, H., 2018. Quality management tools used in the function failure design method. 33rd International Scientific Conference on Economic and Social Development. Varazdin Development and Entrepreneurship Agency, Varazdin, Croatia, 552-560.
• [5] Filo, G., Fabis-Domagala, J., Domagala, M., Lisowski, E., Momeni, H., 2018. The idea of fuzzy logic usage in a sheet-based FMEA analysis of mechanical systems. MATEC Web Conf., 183, art. 03009.
• [6] Gadek-Moszczak, A., Pietraszek, J., Jasiewicz, B., Sikorska, S., Wojnar, L., 2015. The bootstrap approach to the comparison of two methods applied to the evaluation of the growth index in the analysis of the digital X-ray image of a bone regenerate. New Trends in Comput. Collective Intelligence, 572, 127-136.
• [7] Goroshko, A., Royzman, V., Bubulis, A., Juzenas, K., 2014. Methods for testing and optimizing composite ceramics-compound joints by solving inverse problems of mechanics. J. Vibroeng., 16, 2178-2187.
• [8] Goroshko, A., Royzman, V., Pietraszek, J., 2014. Construction and practical application of hybrid statistically-determined models of multistage mechanical systems. Mechanika, 20, 489-493.
• [9] Hamrol, A., Mantura, W., 2004. Quality management. Theory and practice. PWN, Warszawa, Poland. [in Polish]
• [10] Hydraulic Cylinder Troubleshooting. Parker Hydraulic, Bulletin 1242/1-GB.
• [11] Kotnis, G., 2011. Construction and operation of hydraulic systems in machines. KaBe, Krosno, Poland.
• [12] Klimecka-Tatar, D., Borkowski, S., Sygut, P., 2015. The kinetics of Ti-1Al-1Mn alloy thermal oxidation and characteristic of oxide layer. Arch.Metall. Mater. 60, 735-738.
• [13] Kozien, M.S., 2009. Acoustic intensity vector generated by vibrating set of small areas with random amplitudes. J. Theor. Appl. Mech., 47, 411-420.
• [14] Kozien, E., Kozien, M.S., 2017. Interval analysis as a method of measurement of uncertainity in the check-list method applied to identification of stage phase of companies. 26th Int. Sci. Conf. Economic and Social Development – Building Resilient Society: Economic and Social Development. Varazdin Development & Entrepreneurship Agency, Varazdin, Croatia, 210-215.
• [15] Krawczyk, J., Sobczyk, A., Stryczek, J., Walczak, P., 2018. Tests of new methods of manufacturing elements for water hydraulics. Mater. Res. Proc., 5, 200-205.
• [16] Maszke, A., Dwornicka, R., Ulewicz, R., 2018, Problems in the implementation of the lean concept at a steel works – case study. MATEC Web Conf., 183, art. 01014.
• [17] Montgomery, D.C., 2008. Design of experiments. Wiley, Hoboken. Pietraszek, J., 2003. Response surface methodology at irregular grids based on Voronoi scheme with neural network approximator. Adv. Soft. Comp. 250-255.
• [18] Pietraszek, J., Gadek-Moszczak, A., 2013. The smooth bootstrap approach to the distribution of a shape in the ferritic stainless steel AISI 434L powders. Solid State Phenom., 197, 162-167.
• [19] Pietraszek, J., Gadek-Moszczak, A., Torunski, T., 2014. Modeling of errors counting system for PCB soldered in the wave soldering technology. Adv. Mater. Res.- Switz., 874, 139-143.
• [20] Pietraszek, J., Szczotok, A., Radek, N., 2017a. The fixed-effects analysis of the relation between SDAS and carbides for the airfoil blade traces. Arch. Metall. Mater., 62, 235-239.
• [21] Pietraszek, J., Szczotok, A., Kolomycki, M., Radek, N., Kozien, E., 2017b. Nonparametric assessment of the uncertainty in the analysis of the airfoil blade traces. Metal 2017: 26th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1412-1418.
• [22] Radek, N., Szczotok, A., Gadek-Moszczak, A., Dwornicka, R., Broncek, J., Pietraszek, J., 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Arch. Metall. Mater., 63, 809-816.
• [23] Scendo, M., Trela, J., Radek, N., 2014. Influence of laser power on the corrosive resistance of WC-Cu coating. Surf. Coat. Tech., 259, 401-407.
• [24] Skrzypczak-Pietraszek, E., Pietraszek, J., 2009. Phenolic acids in in vitro cultures of Exacum affine Balf. f. Acta Biol. Cracov. Bot., 51, 62-62.
• [25] Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018a. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy. Eng. Life Sci., 18, 287-297.
• [26] Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018b. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 13, art. e0202556.
• [27] Tumer, I.Y., Stone, R.B., 2003. Mapping function to failure mode during component development. Res. Eng. Design, 14, 25-33.
• [28] Ulewicz, R., 2016. Quality Management System operation in the woodworking industry. Int. Conf. Path Forward for wood products: a global perspective. Proc. of Sci. Papers, Zagreb, WOODEMA, 51-56.
• [29] Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast iron foundry. Metal 2013: 22nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931.
• [30] Walczak, P., Sobczyk A., 2014. Simulation of water hydraulic control system of francis turbine. ASME – Fluid Power Systems Technology. 8 th FPNI Ph.D Symposium on Fluid Power, art. V001T04A001.
• [31] Wawrzala, P., Korzekwa, J., 2012. PLZT type ceramics as a material for applications in power pulse capacitors. 21st IEEE Int. Symposium Applications of Ferroelectrics, IEEE, New York.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).