Wear resistance of selected cultivator coulters reinforced with sintered-carbide plates

• Autorzy: Stawicki T. , Kostencki P. , Białobrzeska B.

Identyfikatory

DOI

10.1016/j.acme.2018.07.005

• Języki publikacji: EN

Abstrakty

EN

Within the research, wear resistance of coulters used in cultivators was evaluated. Three constructional solutions of the parts were examined: (A) coulters reinforced in the blade area with brazed-on sintered-carbide plates; (B) coulters reinforced in the blade area with sintered-carbide plates and in their further part by pad-welding; (C) coulters with no reinforcement (made of homogeneous material). The examined parts were installed on a four-beam cultivator that was next used for cultivation of loamy-sand soils with significant humidity. In comparison to the non-reinforced coulters, those reinforced with sintered-carbide plates only and with additional pad-welding were characterised by decidedly high resistance to abrasive wear. Reinforcement of coulters resulted in a change of their limit-state condition. Plates made of sintered carbides decreased rate of length reduction of the parts, which led to big loss of their thickness in the base material area. The limit wear condition of the coulters was related to rubbing-through or reduction of bending strength modulus of the coulters that broke when hitting at stones. For the non-reinforced coulters, the limit wear condition resulted from excessive reduction of their length.

Słowa kluczowe

EN

wear; sintered-carbides; cultivator coulters; SEM

PL

węglik spiekany; spawanie; kultywator

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2018
• Tom: Vol. 18, no. 4
• Strony: 1661--1678
• Opis fizyczny: Bibliogr. 34 poz., rys., tab., wykr.

Twórcy

autor

Stawicki T.

• Department of Agrotechnical Systems Engineering, Faculty of Environmental Management and Agriculture, West Pomeranian University of Technology, Papieża Pawła VI Street 1, 71-459 Szczecin, Poland

autor

Kostencki P.

• Department of Agrotechnical Systems Engineering, Faculty of Environmental Management and Agriculture, West Pomeranian University of Technology, Papieża Pawła VI Street 1, 71-459 Szczecin, Poland

autor

Białobrzeska B.

• Department of Materials Science, Welding and Strength of Materials, Faculty of Mechanical Engineering, Wroclaw University of Technology, Smoluchowskiego Street 25, 50-370 Wrocław, Poland

Bibliografia

• [1] FAO, CA Adoption Worldwide, FAO Aquastat Database, Retrieved from: http://www.fao.org/ag/ca/6c.html2018.
• [2] G. Basch, T. Friedrich, A. Kassam, E. Gonzalez-Sanchez, Conservation agriculture in Europe, in: M. Farooq, K.H.M. Siddique (Eds.), Conservation Agriculture, Springer International Publishing, Switzerland, 2015 357–388. , http://dx.doi.org/10.1007/978-3-319-11620-4_15.
• [3] T. Friedrich, R. Derpsch, A. Kassam, Global overview of the spread of conservation agriculture, Field Act. Sci. Rep. 6 (2012) 1–7. Retrieved from: http://factsreports.revues.org/1941.
• [4] A. Kertész, B. Madarász, Conservation agriculture in Europe, Int. Soil Water Conserv. Res. 2 (1) (2014) 91–96.
• [5] A. Kassam, T. Friederich, R. Derpsch, J. Kienzle, Overview of the worldwide spread of conservation agriculture, Field Act. Sci. Rep. 8 (2015) 1–13. Retrieved from: http://factsreports.revues.org/3966.
• [6] Eurostat 2010 Retrieved from: http://epp.eurostat.ec.europa.eu/statistics_explained/index.php/Agrienvironmental_indicator_-_tillage_practices.
• [7] R. Lahmar, Adoption of conservation agriculture in Europe: lessons of the KASSA project, Land Use Policy 27 (2010) 4–10.
• [8] J.M. Holland, The environmental consequences of adopting conservation tillage in Europe: reviewing the evidence, Agric. Ecosyst. Environ. 103 (2004) 1–25.
• [9] R. Lal, D.C. Reicosky, J.D. Hanson, Evolution of the plow over 10,000 years and the rationale for no-till farming, Soil Tillage Res. 93 (2007) 1–12.
• [10] B.D. Soane, B.C. Ball, J. Arvidsson, G. Basch, F. Moreno, J. Roger-Estrade, No-till in northern, western and southwestern Europe: a review of problems and opportunities for crop production and the environment, Soil Tillage Res. 118 (2012) 66–87.
• [11] A. Vastola, P. Zdruli, M. D'Amico, G. Pappalardo, M. Viccaro, F. Di Napoli, M. Cozzi, S. Romano, A comparative multidimensional evaluation of conservation agriculture systems: a case study from a Mediterranean area of Southern Italy, Land Use Policy 68 (2017) 326–333.
• [12] B.D. Soane, B.C. Ball, Review of management and conduct of long-term tillage studies with special reference to a 25-yr experiment on barley in Scotland, Soil Tillage Res. 45 (1998) 17–37.
• [13] C. Kuforiji, Development of Steel-Alumina Composites for Wear applications, 126, Ottawa-Carleton Institute for Mechanical and Aerospace Engineering, University of Ottawa, Canada, 2017, Retrieved from: https://ruor.uottawa.ca/handle/10393/36149.
• [14] M.M. Severnev (Ed.), Wear of Agricultuar Machine Parts, Published for the U.S. Department of Agriculture and the National Science Foundation, Washington, D.C., by Amerind Publishing Co. Pyt. Ltd., New Delhi, 1984 (translated from Russian, Iznos Detalei Sel'skokhozyaistvennykh Mashin, Kolos Publishers, Leningrad, 1972).
• [15] K. Zum Gahr, Wear by hard particles, Tribol. Int. 31 (10) (1998) 587–596.
• [16] A. Sundström, J. Rendón, M. Olsson, Wear behaviour of some low alloyed steel under combined impast/abrasion contact conditions, Wear 250 (2001) 744–754.
• [17] M.A. Moore, Abrasive wear, in: D.A. Rigney (Ed.), Fundamentals of Friction and Wear of Materials, ASM, Pittsburgh, 1981 73–118.
• [18] E. Zdravecká, J. Tkácová, M. Ondác, Effect of microstructure factors on abrasion resistance of high-strength steels, Czech Acad. Agric. Sci. 60 (3) (2014) 115–120.
• [19] B. Białobrzeska, P. Kostencki, Abrasive wear characteristics of selected low-alloy boron steels as measured in both field experiments and laboratory tests, Wear 328-329 (2015) 149–159.
• [20] U. Er, B. Par, Wear of plowshare components in SAE 950C steel surface hardened by powder boriding, Wear 261 (3-4) (2006) 251–255.
• [21] Z. Horvat, D. Filipovic, S. Kosutic, R. Emert, Reduction of mouldboard plough share wear by a combination technique of hardfacing, Tribol. Int. 41 (8) (2008) 778–782.
• [22] J. Zhang, R.L. Kushwaha, Wear and draft of cultivator sweeps with hardened edges, Can. Agric. Eng. 37 (1) (1995) 41–47.
• [23] A.G. Foley, P.J. Lawton, A.W. Barker, V.A. McLees, The use of alumina ceramic to reduce wear of soil-engaging components, J. Agric. Eng. Res. 30 (1984) 37–46.
• [24] M. Müller, R. Chotěborský, P. Valášek, S. Hloch, Unusual possibility of wear resistance increase research in the sphere of soil cultivation, Teh. Vjesn. 20 (4) (2013) 641–646.
• [25] J. Napiórkowski, K. Ligier, Wear testing of a-Al2O3 oxide ceramic in a diverse abrasive soil mass, Tribologia 1 (2014) 63–74.
• [26] J. Napiórkowski, K. Ligier, G Pękalski, Właściwości tribologiczne węglików spiekanych w glebowej masie ściernej (Tribological properties of cemented carbides In abrasive soil mass), Tribologia 2 (2014) 123–134.
• [27] P. Kostencki, P.T. Stawicki, B. Białobrzeska, Durability and wear geometry of subsoiler shanks provided with sintered carbide plates, Tribol. Int. 104 (2015) 19–35.
• [28] J.M. Fielke, Interactions of the cutting edge of tillage implements with soil, J. Agric. Eng. Res. 63 (1) (1996) 61–72.
• [29] A. Natsis, G. Papadakis, J. Pitsilis, The influence of soil type, soil water and share sharpness of a mouldboard plough on energy consumption, rate of work and tillage quality, J. Agric. Eng. Res. 72 (1999) 171–176.
• [30] S. Dewangan, S. Chattopadhyaya, critical analysis of wear mechanisms in cemented carbide, J. Mater. Eng. Perform. 24 (7) (2015) 2628–2636.
• [31] U. Beste, T. Hartzell, H. Engqvist, N. Axén, Surface damage on cemented carbide rock drill buttons, Wear 249 (2001) 324–329.
• [32] U. Beste, S. Jacobson, Micro scale hardness distribution of rock types related to rock drill wear, Wear 254 (2003) 1147–1154.
• [33] S. Olovsjo, R. Johanson, F. Falsafi, U. Bexell, M. Olsson, Surface failure and wear of cemented carbide rock drill buttons – the importance of sample preparation and optimized microscopy settings, Wear 302 (2013) 1546–1554.
• [34] U. Beste, S. Jacobson, A new view of the deterioration and wear of WC/CO cemented carbide rock drill buttons, Wear 264 (2008) 1129–1141.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019)