Analysis of Stress and Strain Fields in and around Inclusions of Various Shapes in a Cylindrical Specimen Loaded in Tension

• Autorzy: Neimitz A. , Janus U.

Identyfikatory

DOI

10.1515/amm-2016-0097

• Języki publikacji: EN

Abstrakty

EN

A numerical analysis is performed of the stress field in and around inclusions of various shapes. Inclusions both stiffer and more compliant than the metal matrix are analysed. The critical stresses required for inclusion fracture are estimated after observation of cavities and inclusions by scanning electron microscopy. Real inclusions were observed after performing uniaxial loading to different amounts of overall strain. The material tested was Hardox-400 steel.

Słowa kluczowe

EN

void nucleation; inclusion fracture; critical

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2A
• Strony: 569--576
• Opis fizyczny: Bibliogr. 20 poz., rys.

Twórcy

autor

Neimitz A.

• Kielce University of Technology, Faculty of Mechatronics and Machine Design, 1000 Lecia P.P. 7 Av., 25-314 Kielce, Poland

autor

Janus U.

• Kielce University of Technology, Faculty of Mechatronics and Machine Design, 1000 Lecia P.P. 7 Av., 25-314 Kielce, Poland

Bibliografia

• [1] A. Pineau, T. Pardoen, Failure of metals, in Comprehensive Structural Integrity, Fundamental Theories and Mechanisms of Failure, Science Direct, vol. 2, 684-783, (2007).
• [2] J. H. Chen, R. Cao, Micromechanism of cleavage fracture of metals, Elsevier, 2015.
• [3] J. Besson, editor, Local approach to fracture, Ecole des Mines de Paris, 2004.
• [4] M. F. Horstemeyer, S. Ramaswamy, M. Negrete, Mechanics of Materials 35, 675-687, (2003).
• [5] A. S. Gullerud, X. Gao, R. H. Jr. Dodds, R. Haj-Ali, Engineering Fracture Mechanics 66, 65-92, (2000)
• [6] J. Gurland, Acta Metallurgica 20, 735-741, (1972).
• [7] M. D. Dighe, A. M. Gokhale, M. F. Horstemeyer, Metallurgical and Materials Transactions A 33, 1-8, (2002).
• [8] M. N. Shabrov, A. Needleman, Modelling and Simulation in Materials Science and Engineering 10, 163-183, (2002).
• [9] M. N. Shabrov, E. Sylven, S. Kim, D. H. Sherman, L. Chuzhoy, C. L. Briant, A. Needleman, Metallurgical and Materials Transactions A 35, 1745-1755, (2004).
• [10] A. S. Argon, J. Im, Metallurgical and Materials Transactions A 6, 839-851, (1975).
• [11] A. Needleman, A continuum model for void nucleation by inclusion debonding, Journal of Applied Mechanics 54, 525-531, (1987).
• [12] J. D. Eshelby, Proc. R. Soc. A 241, 376-396, (1957).
• [13] B. Z. Margolin, A. G. Gulenko, V. A. Shvetsova, Int. J. Pressure Vessels Piping 75, 843-855, (1998).
• [14] F. M. Beremin, Materials Transactions A 12, 723-731, (1981).
• [15] F. Alexandre, S. Deyber, J. Vaissaud, A. Pineau, TMS, The Minerals, Metals and Materials Society, Superalloys, 02-05 October, (2005)
• [16] G. Huber, Y. Brechet, T. Pardoen, Acta Materialia 53, 2739-2749, (2005).
• [17] A. Needleman, J. Mech. Phys. Solids 38, 289-324, (1990).
• [18] A. Neimitz, I. Dzioba, R. Pała, U. Janus, Solid State Phenomena, Trans Tech Publications, 224, 157-166, (2015).
• [19] J. Galkiewicz, Kielce University of Technology, private communication.
• [20] A. Neimitz, I. Dzioba, U. Janus, Key Engineering Materials, Trans Tech. Publications 598, 168-177, (2014).