Tytuł artykułu
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
A sequence of N-doped carbon materials has been synthesized using poly(acrylonitrile)-ionic liquid copolymers as carbon precursors. The nitrogen content and configuration in carbon materials has been changed regularly within a certain range by adjusting the proportion of ionic liquids. We found that the capacity and rate performance increased dramatically after the introduction of ionic liquids, which was attributed to incorporation of higher amount pyridinic-N, pyrrolic-N into the carbon materials. Besides, with the increase of the graphitic-N, the initial Coulombic efficiency decreased from 58.5 % to 53.47 % and the RSEI raised from 66.34 W to 140.96 W, which was attributed to the higher cohesive energy of Li dimmer than adsorption energy of graphitic-N with Li, since more lithium clusters during the formation of SEI film were formed. The electrochemical tests also revealed the negative role of graphitic-N in the capacity. Therefore, this work provides a feasible method to design the nitrogen content and configuration of the N-doped carbon materials.
Wydawca
Czasopismo
Rocznik
Tom
Strony
518--525
Opis fizyczny
Bibliogr. 43 poz., rys., tab.
Twórcy
autor
- School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
autor
- School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
autor
- School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
autor
- School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
autor
- School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
autor
- School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
- State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou 730050, China
autor
- Department of Mechanical and Industrial Engineering, Texas A&M University-Kingsville, Kingsville, Texas, 78363, USA
Bibliografia
- [1] JI J., LIU J., LAI L., ZHAO X., ZHEN Y., LIN J., ZHU Y., JI H., ZHANG L.L., RUOFF R.S., ACS Nano, 9 (2015), 8609.
- [2] PHAM-CONG D., PARK J.S., KIM J.H., KIM J., BRAUN P.V., CHOI J.H., KIM S.J., JEONG S.Y., CHO C.R., Carbon, 111 (2017), 28.
- [3] GUO W., LI X., XU J., LIU H.K., MA J., DOU S.X., Electrochim. Acta, 188 (2016), 414.
- [4] LIU X., ZHANG J., GUO S., PINNA N., J. Mater. Chem. A, 4 (2016), 1423.
- [5] LIU X., WU Y., YANG Z., PAN F., ZHONG X., WANG J., GU L., YU Y., J. Power Sources, 293 (2015), 799.
- [6] ZHANG Y., WANG Y., MENG Y., TAN G., GUO Y., XIAO D., RSC Adv., 6 (2016), 98434.
- [7] WANG H.-G., WANG Y., LI Y., WAN Y., DUAN Q., Carbon, 82 (2015), 116.
- [8] HAN S.-W., JUNG D.-W., JEONG J.-H., OH E.-S., Chem. Eng. J., 254 (2014), 597.
- [9] YUE H., LI F., YANG Z., TANG J., LI X., HE D., Mater. Lett., 120 (2014), 39.
- [10] KIM J.G., LIU F., LEE C.-W., LEE Y.-S., IM J.S., Solid State Sci., 34 (2014), 38.
- [11] SUN Y., NING G., QI C., LI J., MA X., XU C., LIY., ZHANG X., GAO J., Electrochim. Acta, 190 (2016), 141.
- [12] WANG J., YANG Z., PAN F., ZHONG X., LIU X., GU L., YU Y., RSC Adv., 5 (2015), 55136.
- [13] SELVAMANI V., RAVIKUMAR R., SURYANARAYANAN V., VELAYUTHAM D., GOPUKUMAR S., Electrochim. Acta, 190 (2016), 337.
- [14] KHOOBI A., GHOREISHI S.M., BEHPOUR M., SHATERIAN M., SALAVATI-NIASARI M., Colloid. Surface. B-Biointerf., 123 (2014), 648.
- [15] GHOREISHI S.M., BEHPOUR M., KHOOBI A., MASOUM S., Arab. J. Chem., 10(2017), S3156.
- [16] QIAN C., GUO P., ZHANG X., ZHAO R., WU Q., HUAN L., SHEN X., CHEN M., RSC Adv., 6 (2016), 93519.
- [17] MAO Y., DUAN H., XU B., ZHANG L., HU Y., ZHAO C., WANG Z., CHEN L., YANG Y., Energ. Environ. Sci., 5 (2012), 7950.
- [18] CZERW R., TERRONES M., CHARLIER J.-C., BLASEX., FOLEY B., KAMALAKARAN R., GROBERT N.,TERRONES H., AJAYAN P., BLAU W., arXiv preprintcond-mat/0011318, 2000).
- [19] COLLINS J., GOURDIN G., FOSTER M., QU D., Carbon,92 (2015), 193.
- [20] YANG Y., ZHENG F., XIA G., LUN Z., CHEN Q., J.Mater. Chem. A, 3 (2015), 18657.
- [21] TAN Z., NI K., CHEN G., ZENG W., TAO Z., IKRAMM., ZHANG Q., WANG H., SUN L., ZHU X., WU X.,JI H., RUOFF R.S., ZHU Y., Adv. Mater., 29 (2017).
- [22] ZHENG F., YANG Y., CHEN Q., Nat. Commun., 5 (2014), 5261.
- [23] ZHU J., CHEN C., LU Y., GE Y., JIANG H., FU K., ZHANG X., Carbon, 94 (2015), 189.
- [24] JEONG M.-G., ISLAM M., DU H.L., LEE Y.-S., SUN H.-H., CHOI W., LEE J.K., CHUNG K.Y., JUNG H.- G., Electrochim. Acta, 209 (2016), 299.
- [25] WANG X., WENG Q., LIU X., WANG X., TANG D.M., TIAN W., ZHANG C., YI W., LIU D., BANDO Y., GOLBERG D., Nano Lett., 14 (2014), 1164.
- [26] SHIN W.H., JEONG H.M., KIM B.G., KANG J.K., CHOI J.W., Nano Lett., 12 (2012), 2283.
- [27] WANG H.-G., YUAN C., ZHOU R., DUAN Q., LI Y., Chem. Eng. J., 316 (2017), 1004.
- [28] LI Z., XU Z., TAN X., WANG H., HOLT C.M.B., STEPHENSON T., OLSEN B.C., MITLIN D., Energ. Environ.Sci., 6 (2013), 871.
- [29] CHO K.T., LEE S.B., LEE J.W., J. Phys. Chem. C, 118 (2014), 9357.
- [30] ZHAO Q., FELLINGER T.P., ANTONIETTI M., YUAN J., Macromol. Rapid Commun., 33 (2012), 1149.
- [31] ZHAO W., LU Y., WANG J., CHEN Q., ZHOU L., JIANG J., CHEN L., Polym. Degr. Stabil., 133 (2016), 16.
- [32] ZHANG W., MUSEN L.I., J. Mater. Sci. Technol., 21 (2005), 581.
- [33] RAHAMAN M.S.A., ISMAIL A.F., MUSTAFA A., Polym. Degr. Stabil., 92 (2007), 1421.
- [34] GUANGHUI W., RUIYI L., ZAIJUN L., JUNKANG L., ZHIGUO G., GUANGLI W., Electrochim. Acta, 171 (2015), 156.
- [35] WU X., YU X., LIN Z., HUANG J., CAO L., ZHANG B., ZHAN Y., MENG H., ZHU Y., ZHANG Y., Int. J. Hydrogen Energ., 41 (2016), 14111.
- [36] WANG H., ZHANG C., LIU Z., WANG L., HAN P., XU H., ZHANG K., DONG S., YAO J., CUI G., J. Mater. Chem., 21 (2011), 5430.
- [37] EINERT M., WESSEL C., BADACZEWSKI F., LEICHTWEIS T., EUFINGER C., JANEK J., YUAN J., ANTONIETTI M., SMARSLY B.M., Macromol. Chem. Phys., 216 (2015), 1930.
- [38] YAN G., LI X., WANG Z., GUO H., WANG C., J. Power Sources, 248 (2014), 1306.
- [39] OU J., YANG L., ZHANG Y., CHEN L., GUO Y., XIAO D., Chinese J. Chem., 33 (2015), 1293.
- [40] LING Z., YU C., FAN X., LIU S., YANG J., ZHANG M., WANG G., XIAO N., QIU J., Nanotechnology, 26 (2015), 374003.
- [41] ISMAGILOV Z.R., SHALAGINA A.E., PODYACHEVA O.Y., ISCHENKO A.V., KIBIS L.S., BORONIN A.I.,CHESALOV Y.A., KOCHUBEY D.I., ROMANENKO A.I., ANIKEEVA O.B., BURYAKOV T.I., TKACHEV E.N., Carbon, 47 (2009), 1922.
- [42] JIN J., SHI Z.-Q., WANG C.-Y., Electrochim. Acta, 141 (2014), 302.
- [43] SARAVANAN K.R., KALAISELVI N., Carbon, 81 (2015), 43.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-9f988dc7-6aa9-4768-8791-0f0042ceadea