Thermal and electrical analysis of automotive ignition system

• Autorzy: Sebok Milan , Kucera Matej , Gutten Miroslav , Korenciak Daniel

Identyfikatory

DOI

10.14669/AM.VOL83.ART8

• Języki publikacji: EN

Abstrakty

EN

This article describes evaluation principles of individual parts of the ignition system, using conventional diagnostic systems, based on evaluation of current and voltage waveforms. By means of the practical test, diagnostics, measurements and subsequent analysis it was proved that thermovision plays an important role in diagnostics in on-line check automotive equipment. By comparing the non-standard warming behaviour of a part of the electrical system with combination with time highvoltage method, it is possible to diagnose a fault and also check the operating mode of the system. Sample thermogram of the temperature distribution of the ignition coils and analysis of high-voltage ignition curves with faulty spark plugs is given in the part of the paper of nondestructive diagnostics with a difference in temperature. Analysing the fault condition of ignition systems, using the method conventional diagnosis of high-voltage pulse waveforms and also the method of thermovision diagnostics, we can adequately evaluate the functionality of the electronic system and its individual components. In some cases, with one coil ignition systems, we cannot use the conventional method and therefore it is preferable to proceed to the analysis of temperature fields.

Słowa kluczowe

EN

thermovision; ignition systems; spark plug; high-voltage waveforms

• Wydawca: Wydawnictwo Naukowe Sieci Badawczej Łukasiewicz - Przemysłowego Instytutu Motoryzacji
• Czasopismo: Archiwum Motoryzacji
• Rocznik: 2019
• Tom: Vol. 83, nr 1
• Strony: 113--121
• Opis fizyczny: Bibliogr. 20 poz., rys., wykr.

Twórcy

autor

Sebok Milan

• Department of Measurement and Application Electrical Engineering, Faculty of Electrical Engineering and Information Technology, University of Zilina, Univerzitna 1, 010 26 Zilina, Slovakia

autor

Kucera Matej

• Department of Measurement and Application Electrical Engineering, Faculty of Electrical Engineering and Information Technology, University of Zilina, Univerzitna 1, 010 26 Zilina, Slovakia

autor

Gutten Miroslav

• Department of Measurement and Application Electrical Engineering, Faculty of Electrical Engineering and Information Technology, University of Zilina, Univerzitna 1, 010 26 Zilina, Slovakia

autor

Korenciak Daniel

• Department of Measurement and Application Electrical Engineering, Faculty of Electrical Engineering and Information Technology, University of Zilina, Univerzitna 1, 010 26 Zilina, Slovakia

Bibliografia

• [1] Barta D., Mruzek M. Non-conventional drive and its possibilities of using in road vehicles of public transport. OPT-i 2014 - 1st International Conference on Engineering and Applied Sciences Optimization, Proceedings, 2014, pp. 2049-2061.
• [2] Bartlomiejczyk M., Simko M., Chupac M., Hamacek S. Diagnostics of thermal processes in antenna systems of broadcast stations. Przeglad Elektrotechniczny, Vol. 90, No. 4, 2014, pp. 149-152, DOI: 10.12915/pe.2014.04.34.
• [3] Brandt, M. Identification failure of 3 MVA furnace transformer. Conference DEMISEE 2016, Papradno, 2016, Slovak Republic, pp. 6-10, DOI: 10.1109/DEMISEE.2016.7530472.
• [4] Brandt, M. Experimental measurement and analysis of frequency responses SFRA for rotating electrical machines. Elektroenergetika 2017, Stara Lesna, Slovak Republic, pp. 284-288.
• [5] Chen L., Zhang Z. Study on the Measurement of Dynamic Characteristics for Automotive Electronic Fuel Injector. International Conference on Transportation, Mechanical, and Electrical Engineering (TMEE 2011), China, pp. 511-514, 2011, DOI: 10.1109/TMEE.2011.6199253.
• [6] Frivaldsky, M., Cuntala, J., Spanik, P., Kanovsky, A. Investigation of thermal effects and lifetime estimation of electrolytic double layer capacitors during repeated charge and discharge cycles in dedicated application. Electrical Engineering, Vol. 100, No. 1, pp. 11-25, DOI: 10.1007/s00202-016-0482-2.
• [7] Glowacz A., Glowacz Z. Diagnosis of the three-phase induction motor using thermal imaging. Infrared Physics and Technology, Vol. 81, 2017, pp. 7-16, DOI: 10.1016/j.infrared.2016.12.003.
• [8] Glowacz, A., Glowacz, W., Glowacz, Z., Kozik, J. Early fault diagnosis of bearing and stator faults of the single-phase induction motor using acoustic signals. Measurement: Journal of the International Measurement Confederation, Vol. 113, 2018, pp. 1-9. DOI: 10.1016/j.measurement.2017.08.036
• [9] Glowacz, A., Glowacz, W. Vibration-Based Fault Diagnosis of Commutator Motor. Shock and Vibration, 2018, DOI: 10.1155/2018/7460419.
• [10] Jia J., Wang Q., Yu J., Zheng Y. Wideband equivalent circuit model and parameter computation of auto-motive ignition coil based on finite element analysis. Application Computational Electromagnetics Society Journal, Vol. 25, 2010, pp. 612-619.
• [11] Kanuch J., Ferkova Z. Simulation stepping motor with DISC rotor. International Conference on Low Voltage Electrical Machines, Brno, 2010.
• [12] Li X., Lu X., Han G. The Design and Simulation Research of Mazda6 Hybrid Electric Vehicle. Przeglad Elektrotechniczny, Vol. 88, No. 3b, 2012, pp. 44-47.
• [13] Mruzek M., Gajdac I., Kucera L., Barta D. Analysis of parameters influencing electric vehicle range. Procedia Engineering, Vol. 134, 2016, pp. 165-174, DOI: 10.1016/j.proeng.2016.01.056.
• [14] Pavelek, M., Frivaldsky, M., Spanik, P. Multi-level simulation model of the wireless power transfer system. 12th International Conference ELEKTRO 2018, 2018, pp. 1-4, DOI: 10.1109/ELEKTRO.2018.8398274.
• [15] Pavelek, M., Frivaldsky, M., Spanik, P. Distribution and shaping of magnetic field of wireless energy transfer system. EEE International Symposium on Industrial Electronics, pp. 705-710, DOI: 10.1109/ISIE.2017.8001332.
• [16] Sebok M., Gutten M., Adamec J., Glowacz A., Roj J. Analysis of the electronic fuel injector operation. Communications - Scientific Letters of the University of Zilina, Vol. 20, No. 1, 2018, pp. 32-36.
• [17] Simko M., Chupac, M. Non-destructive method of measurement of radio transmitters antenna systems. Elektronika ir elektrotechnika, Vol. 107, No. 1, 2011, pp. 33-36.
• [18] Spanik P., Sedo, J., Drgona, P., Frivaldski M. Real Time Harmonic Analysis of Recuperative Current through Utilization of Digital Measuring Equipment. Elektronika ir Elektronika, Vol. 19, No. 5, 2013, pp. 33-38, DOI:10.5755/j01.eee.19.5.4364.
• [19] Sterba P. Electronic Equipment car. Brno: Computer Press, 2004, 250pp.
• [20] Wang I.Q. et al. Circuit model and parasitic parameter extraction of the spark plug in the ignition system. Turk J Elec Eng & Comp Sci, Vol. 20, No.5, 2012, DOI: 10.3906/elk-1009-751.

Uwagi

EN

This article is the result of a project implementation: Modern methods of teaching of control and diagnostic systems of engine vehicles, ITMS code 26110230107, supported by the Operational Programme Educational.

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).